Tender For Addition/Alteration To Joineries In Domestic Area At Af Stn Tezpur
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
6 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Joineries In Domestic Area At Af Stn Tezpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Nov-2026 | Revision of BOQ | BOQ | 21-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat with shutter n. exc. 1.5 sqm each including hold fast (without taking off shutter from the Frame) including making good to disturbed surface of jambs/cill in CM 1:3 and matching the new surface by applying two coats of oil bound distemper over a coat of primer complete all as specified .Note :- After taking down of chowkhat with shutter, opening should be temporary closed with the help of plywood till the new aluminium window/ door/ ventilator is fixed. Rate for the same shall be deemed included in the qouted rate under this item. |
| 2 | S & F powder coated (colour as aproved by Engr-in Charge) anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete all as specified and directed.Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC as directed by EIC etc (Ref CE(AF) Shillong Zone TD Drg No AF/TD/242/15(R), including neccesory plaster in cement mortar 1;4 for window seal and jam and making good to the adjuscent plaster surface and two coats of acrylic emulsion and over one coat of primer etc. |
| 3 | S& F Powder coated (minimum thickness of powder coating 50 micron - colour as aproved by Engr-in Charge) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 4 | S&F powder coated (colour as aproved by Engr-in Charge) Anodised aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, poweder coated anodised aluminium snap beading, screws, powder coated anodised aluminium fittings with each shutter such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) and 01 no tower bolt, complete all as specified and directed. |
| 5 | Supply and fix 4.80mm thick tinted glass in aluminium shutter with the help of U shaped rubber gasket and snap beading in square exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 6 | S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed in aluminium shutter, complete all as specified and directed |
| 7 | Supply and fix powder coated of any colour anodised aluminium grill, 7.1 mm thick weighing 2.911 Kg/Sqm (section code 22603 of Jindal or equivalent of Hindalco /Indal) and complete arrangments for fixing the Window/Ventilator such as channel, flat, screw and neccesory item, complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender