Tender For Providing Necessary Special Repair Works To The Pattukottai Zonal And Unit Office Buildings Of Coastal Security Group In Thanjavur District For The Year 2026-2027.
Tender Value
22.84 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
10 days left
EMD
21500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Necessary Special Repair Works To The Pattukottai Zonal And Unit Office Buildings Of Coastal Security Group In Thanjavur District For The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Removing the damaged existing floor finish & dadooing walls in cement mortar with Mosaic tiles / Glazed tiles/ Clay tiles/ Cuddaph slab tiles/ Wall tiles in Cement mortor |
| 2 | Dismantling clearing away and carefully stacking materials useful for reuse of Plain Cement Concrete |
| 3 | Dismantling clearing away and carefully stacking materials useful for reuse of Pressed Tiles and Weathering Course |
| 4 | Dismantling clearing away and carefully stacking materials useful for reuse of Reinforced Cement Concrete |
| 5 | Dismantling, clearing away and carefully stacking materials useful for re-use of Brick / Stone in Cement Mortor over the initial height of 3m |
| 6 | Clean removal of Cement plaster from the old wall and without affecting the adjacent structures |
| 7 | Earth work excavation for foundation in all soils and sub-soils and to the required depth as may be directed except in hard rock requiring blasting (Including Refilling)(a) 0 to 2m depth |
| 8 | Plain Cement Concrete 1:5:10 with Admixture for foundation using 40mm gauge hard broken stone jelly |
| 9 | Brick Partition wall in Cement Mortor 1:4 with Admixture 110mm thick for super structure in the following floors using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) (a) In Foundation and Basement |
| 10 | Brick work in Cement Mortar 1:5 using kiln burnt country bricks of size 8 3/4\\"X4 1/4\\" X 2 3/4\\" (22x11x7cm) with Admixture in Foundation and Basement |
| 11 | Brick work in Cement Mortar 1:6 using Kiln Burnt Country bricks of size 8 3/4\\"X4 1/4\\"X2 3/4\\" (22X11X7cm) with Admixture for super structure(c) In Second Floor |
| 12 | Providing Form work and centering for reinforced cement concrete works including supports and strutting upto 3.30m height (b) Plain surfaces such as Roof slab, Floor slab, Beams Lintels, Loft, Sill slab, Staircase waist, Portico slab and other similar works. |
| 13 | Providing and laying in position, Standardized concrete mix M20 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken stone jelly for all RCC items of works (d) In Second Floor |
| 14 | Weathering course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab |
| 15 | Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels (Without Cement Slurry) for reinforcement for all floors |
| 16 | Supply and delivery at site and fixing of SFRC Manhole cover slab of size 900mmx900mm with frame with locking arrangement |
| 17 | Finishing top of roof with one course of Hydraulic pressed tiles of approved superior quality of size 23cm x 23cm x 20mm tk laid over weathering course in CM 1:3 with Admixture 12mm thick |
| 18 | Supplying and fixing of Colour glazed tiles over cement plastering in CM 1:2 with Admixture 10mm thick including fixing in position |
| 19 | Supplying and laying of Ceramic Tiles (Anti-Skid) for flooring works over cement mortor 1:3 with Admixture 20mm thick including fixing in position |
| 20 | Supplying and fixing of Vetrified tiles (Ivory) 600x600x8mm for flooring over Cement Mortar 1:3 with Admixture 20mm thick including fixing in position |
| 21 | Flooring with a bed of Cement Concrete 1:5:10 with Admixture using 40mm size hard broken stone jelly |
| 22 | Plastering with C.M. 1:5 with Admixture 12mm thick |
| 23 | Special Ceiling Plastering in Cement Mortor 1:3 with Admixture 10mm thick for bottom of roof, stair, waist, landing and sunshades in all floors |
| 24 | Providing Two legged Scaffolding using 15Cm dia casurina props using country wood planks 40mm thick (a) 8 m height in addition of 2.5m height. |
| 25 | Plastering with C.M. 1:4 with Admixture 12mm thick finished with neat cement |
| 26 | Finishing the top of flooring with cement concrete 1:3 20mm thick Ellispattern flooring (No Sand) |
| 27 | Finishing the top of flooring in CM 1:4 with Admixture 20mm thick including surface rendered smooth |
| 28 | Supplying and fixing of Fibre Mixed Precast Slab of 50mm Thick of all required shapes in CC 1:3:6 with Admixture using 20mm hard broken stone jelly |
| 29 | Supplying and filling in Foundation and Basement with FILLING SAND in layers of 150mm thickness |
| 30 | Supply and errection of Rotational Moulded Polyethylenewater storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres |
| 31 | Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark type 'A' for Rain Water Down Fall Pipe |
| 32 | Supplying and fixing of 1200mm dia 30cm depth 40mm thick RCC round precast collar |
| 33 | Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth a. Providing pit |
| 34 | b. Augering 30cm dia |
| 35 | Supplying, laying, fixing and jointing the following dia PVC Pipes as per ASTM D-1785 of schedule 40 of wall thickness(a) 32mm dia ASTM-D schedule 40 threaded PVC Pipe |
| 36 | (b) 25mm dia ASTM-D schedule 40 threaded PVC Pipe |
| 37 | Supplying, laying, fixing and jointing the following pvc pipes as per ASTM D-1785 of schedule 40 of wall thickness (c) 20mm ASTM D schedule 40 threaded PVC pipe |
| 38 | Supplying and fixing the following dia PVC (SWR) pipe with ISI mark type \\"B\\" for soil line with relevant specials(a) 110mm dia PVC SWR Pipe including all required PVC Specials |
| 39 | (b) 75mm dia PVC SWR Pipe including all required PVC Specials |
| 40 | (b) 50mm dia PVC SWR Pipe including all required PVC Specials |
| 41 | Supplying and laying and jointing the following dia Non Pressure Pipe of SN-8 SDR 34a) 110mm dia UPVC Non Pressure Pipe |
| 42 | b) 160mm dia UPVC Non Pressure Pipe |
| 43 | Construction of Inspection chamber of size 60x60x60cm including earth work excavation including refilling,PCC 1:8:16,Brick work in Cement Mortar 1:5 using kiln burnt country bricks (22x11x7cm) with Admixture |
| 44 | Supplying and fixing of 15mm dia Brass core C.P. Long body Tap |
| 45 | Supplying and fixing of 15mm dia C.P (Short body) of Best quality |
| 46 | Supplying and fixing of C.P Two way Bib cock with health faucet |
| 47 | Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm with PVC SWR grade `P` or `S` trap. In Ground floor. |
| 48 | Supplying and fixing EWC (White) 500mm with PVC SWR grade \\"P\\" or \\"S\\" TRAP |
| 49 | Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm with PVC SWR grade `P` or `S` trap, (Other than ground floor) |
| 50 | Supplying and fixing of porcelain Wash Hand Basin (White without pedestal), of size 550 x 400mm with all accessories |
| 51 | Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame of size 50X47mm with a wall thickness of 5mm |
| 52 | Supplying and fixing of Teak wood wrought and putup for frames of doors, windows, ventilators, cupboard and any other similar joinery works (a) Teak wood over 2.00m and below 3.00m length |
| 53 | (b) Teak wood below 2.00m length |
| 54 | Supplying and fixing of best Indian Teak Wood Paneled door shutters Single Leaf in position a) 1000x2100mm (Brass fitttings) (Single leaf) |
| 55 | Painting the New Wood work with two coats of approved First class synthetic enamel ready mixed paint in addition to one coat of primer |
| 56 | Painting the old iron work with Two coats and other similar works such as PVC/ASTM pipes, Kerb stone and grills with approved First class synthetic enamel paint including thorough scrapping |
| 57 | Painting the old wood work with two coats of approved First class synthetic enamel paint including thorough scrapping |
| 58 | White washing Two coats for existing surface using clean slacked shell lime |
| 59 | White washing Three coats for new plastered surface using clean shell lime slaked |
| 60 | Painting the old walls with Two Coats of approved best Ready mixed Exterior Emulsion paint without primer, including thorough scrapping |
| 61 | Painting the old walls with Two Coats of approved best Ready mixed plastic Emulsion paint without primer, including thorough scrapping |
| 62 | Open Wiring with 1.5 sqmm copper P.V.C insulated unsheathed single core Multi Strand Fire retardant flexible copper cable witrh ISI mark for Open wiring with 3mm thick laminated hylem sheet for 5 Amps 5 Pin Plug Socket point at CONVENIENT PLACES |
| 63 | Supplying and fixing of Water tight bulk head fitting with Guard suitable for 12W LED Bulb |
| 64 | Run off main with 2 wires of 1.5 sqmm PVC Insulated single core multi strand fire retardant flexible copper cable in fully concealed rigid PVC conduit pipe |
| 65 | Supplying and fixing of 25 Watts LED Street Light fitting with LED arrangements |
| 66 | Supplying and fixing of 12 Watts LED Bulb of best quality |
| 67 | Supplying and fixing of PVC 3mm thick Hylem sheet |
| 68 | Supplying and fixing of 5 Amps flush type switch |
| 69 | Supply and fixing of 5 Amps 3 pin / 2 pin Flush type wall socket |
| 70 | Supplying and fixing of 9 Watts LED Bulb of best quality |
| 71 | Supplying and fixing of 4' 18 Watts Crystal LED Tube light and fixing of the tube light fittings on teak wood round blocks |
| 72 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with (PVC box Fire retraded box) of required thickness concealed for FAN POINT |
| 73 | Charges for assembling and fixing of Ceiling Fan of Different Sweep with necessary Connections (Excluding Cost of Fan) |
| 74 | Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor, etc., (a) 48\\" Electric fan 1200mm sweep |
| 75 | Drilling of borewell anywhere including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay (a) Upto 76m depth ending below Ground level |
| 76 | (b) From 76m upto 91m depth ending below Ground level |
| 77 | (c) From 91m upto 107m depth ending below Ground level |
| 78 | (d) From 107m upto 122m depth ending below Ground level |
| 79 | Reaming from 140/150 mm dia pilot bore to 300 mm dia bore as directed by the TWAD Board Officers upto 60 m Depth ending from ground level etc(a) Upto 60 m depth ending below ground level |
| 80 | (b) From 60 m depth and upto 90 mt depth ending below ground level |
| 81 | (c) From 90 m upto 120 mt depth ending below ground level |
| 82 | (d) From 120 m upto 150 mt depth ending below ground level |
| 83 | Supplying, delivery and erection of PVC casing pipe Medium depth suitable for 150 mm dia borewell |
| 84 | Supplying, delivery and erection of PVC casing pipe Ribbed Screen for 150 mm dia borewell |
| 85 | Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole (a) 150mm dia casing pipe assembly |
| 86 | Charges for developing the Borewell with air compressor of 600 CFM capacity Minimum 8 Hours) |
| 87 | Supplying and fixing of MS Clamp set with bolts and nuts of suitable for 6\\" (150mm) dia bore well |
| 88 | Supply, delivery and fixing of 160mm dia PVC End cap for borewell and top cover |
| 89 | Supply and delivery of required dia Nylon Rope of superior quality for submersible pumpset |
| 90 | Supply and layin of 3 core flat type copper cable 4 Sqmm conforming to XLPE insulated and sheathed cable |
| 91 | Supplying and lowering of 32mm dia UPVC Column pipe for bore inner |
| 92 | Supplying and fixing of following dia GI specials of best approved quality (a) 40 mm x 32 mm dia G.I Reducer |
| 93 | b) 32mm dia G.I Union |
| 94 | c) 32mm dia G.I Bend |
| 95 | d) 32mm dia G.M. Non Return valve |
| 96 | Supplying and delivery of 40 mm dia Cast Iron Adopter of approved superior quality |
| 97 | Supplying, laying and jointing the following dia UPVC pipes below ground level a) 32mm dia UPVC Pipe |
| 98 | Supplying,Laying and fixing of 32mm dia PVC Pipe 10Kg/Cm2 of approved best quality (In Below Ground Level) |
| 99 | Supply and delivery of clear water vertical wet type Three phase 3.0 HP submersible pumpset |
| 100 | Labour charges for the erection of Three phase 5.0 HP submersible pumpset in borewell / openwell |
| 101 | Supply and delivery of Three Phase Panel Board Star-Delta starter Upto 3.0 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender