Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #58339144

Tender For Repair To Steel Furniture Under Ge (W) Agra

Issued by Statutory Bodies & Commissions/Committees · Agra, Uttar Pradesh
Tender Value
32 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair To Steel Furniture Under Ge (W) Agra

BOQ

Name of Work:- REPAIR TO STEEL FURNITURE UNDER GE (W) AGRA
Sl. No. Item Description
1REPAIR OF UNDER MENTIONED FURNITURE ITEMS WILL BE CARRIED OUT AS FOLLOWS :- (a) Removing of old u/s parts without disturbing the adjoining parts of fruniture articles as mentioned below and S & F new parts in repair as per existing shape, size and specification duly planned and finished as shown on drawing complete all as specified and directed by GE / Engr- in -Charge.(b) Work will be executed on site in different user units / Md Accn under AOR of GE (W) Agra and BSO furniture Yard as directed by Engr -in- charge.(c) Top of furniture items i.e tablle etc shall be made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE /Engr-in-Charge.(d) Plywood / MDF of different sizes as specified in furniture drg shall be of make Archid / Green Ply / Century ply adhereing specification as specified in furniture drgs.(e)M&L for painting to the fwg furniture articles of MES pattern viz F/DB/FD/MAP series /TP or similar items through spray painting with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces by sanding and grinding standard workmanship as directed by Engr-in-charge. Colour of paint shall be as directed by GE /EIC.
2TRESTLE STORE ROOM IRON :- FD-1043
3Taking out old L iron and S& F new L iron of size 40mm x 40mm x 6mm of 1980mm length all as specified as per drg and directed.
4Welding to L & T irons and bracing sections of Trestle in which welding has been broken all as specifed and directed.
5M&L for spray painting with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.
6SIDE RACK WITH TRAY :- FD-1023
7Taking out old broken legs and S& F new legs of mild steel angle iron 40mm x 40mm x3mm to side rack all as specidied in drg and as directed.
8Taking out shevles and S&F shelves of mild steel sheet 1mm thickness made to shape to be welded to angle iron legs all as specfied in drg and as directed.
9M&L for spray painting with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.
10SHOE RACK STEEL:- FD/E6/MAP/02 (R)
11Taking out old broken Main frame legs and S & F new main frame legs of 25mm dia MS pipe (18 gauze) all as specified and as shown on drg & as directed.
12Taking out old broken Jali work and S & F new jali work with 3mm dia MS Rod ( 03 Nos placed veritracally equidistant & 09 Nos placed horizontaly equidistant) welded together to form jali within 19mm dia MS pipe of 18 gauze of main frame work welded to legs.
13Taking out old u/s shoe and S &F new rubber shoe of suitable shape and size as shown on drg or as directed by Engr-in-Charge
14M&L for painting two coat of synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.
15ALMIRAH LARGE STEEL WITH SHELVES :- FD-67(M)/351/1031
16Removal of old existing U/S shutter (Single) of almirah large steel and S&F new shutter made of 1 mm thick MS sheet as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.
17All as per item No 5.01 above but Tops
18All as per item No 5.01 above but Bottom
19All as per item No 5.01 above but Shelves
20All as per item No 5.01 above but Cover plate of locks
21Removing U/S lock of almirah large and S&F new SS lock 6 levers of make Godrej/Link/Harrison pattern as per existing size with duplicate keys complete all as specified and directed
22Removing of old U/S lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed.
23Removing of old U/S handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as directed
24Removing of old U/S key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed.
25Removing of old U/S leg of almirah large steel and S&F new leg made of 1 mm thick MS sheet with Gas welding as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.
26M&L for spray painting of almirah large steel with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.
27M &L for removal of complete layer of synthetic enamel paint incl primer from Almirah Large Steel with shelves using paint remover followed by scraping, denting & filling of unvenen surfaces with putty of best quality for smooth finish and applying two coats of synthetic enamel paint of approved shade by spray painting over a coat of red oxide. Rest all as directed by Engr-in-Charge.
28ALMIRAH MEDIUM STEEL WITH SHELVES :-FD-67(M)/350/1032
29All as per item No 5.01 here-in-before but shutter of Almirah Medium
30All as per item No 5.01 above but Tops of Almirah Medium
31All as per item No 5.01 above but Bottom of Almirah Medium
32All as per item No 5.01 above but Shelves of Almirah Medium
33All as per item No 5.01 above but Cover plate of locks of Almirah Medium
34All as per item No 5.06 above but locks of Almirah Medium
35All as per item No 5.07 above but lock assembly of Almirah Medium
36All as per item No 5.08 above but Handle of Almirah Medium
37All as per item No 5.09 above but Key Plate of Almirah Medium
38All as per item No 5.10 above but Legs of Almirah Medium
39All as per item No 5.11 above but Painting of Almirah Medium
40M&L for removal of complete layer of synthetic enamel paint incl primer from Almirah Medium Steel with shelves using paint remover followed by scraping, denting & filling of unvenen surfaces with putty of best quality for smooth finish and applying two coats of synthetic enamel paint of approved shade by spray painting over a coat of red oxide. Rest all as directed by Engr-in-Charge.
41LOCKER STEEL : FD-257
42All as per item No 5.01 here-in-before but shutter of Locker steel
43All as per item No 5.01 above but Top of Locker steel
44All as per item No 5.01 above but Bottom of Locker steel
45All as per item No 5.01 above but Shelves of Locker steel
46All as per item No 5.08 above but Handle 'D' type of Locker steel
47All as per item No 5.10 above but Legs of Locker steel
48All as per item No 5.11 above but Painting of Locker steel
49Removing of old U/S haps and staple and S&F of new chromium plated hasp & staple fixed with rivets of locker steel complete all as directed.
50M&L for removal of complete layer of synthetic enamel paint incl primer from Locker Bed Side Steel using paint remover followed by scraping, denting & filling of unvenen surfaces with putty of best quality for smooth finish and applying two coats of synthetic enamel paint of approved shade by spray painting over a coat of red oxide. Rest all as directed by Engr-in-Charge.
51CHAIR CB STEEL WITHOUT ARMS : FD-75(M)
52Removal of old U/S seat frame and S&F new seat frame of 1st class hard teak wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.
53All as per item No 8.01 her-in-before but back frame
54M&L for painting to chair CB steel without arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.
55CHAIR CB STEEL WITH ARMS : FD75(M)
56Removal of old U/S seat frame and S&F new seat frame of 1st class hard teak wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.
57All as per item No 9.01 her-in-before but back frame
58Removal od old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard teak wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed.
59M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.
60REPAIR TO CHAIR VERANDAH : FD-256/259/359
61Legs with arm rest of 19mm dia MS conduit 1.5mm thick incl one coat of red oxide primer.
62Seat frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer
63Back frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer
64Taking out old U/S cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge.
65Taking out old U/S PVC seat & back of chair verandah and S& F new PVC seat 4mm thick (weight not less than 1.85 Kg) having ribs on back side. 10 Nos grooves of size 90mm x 10mm shall be provided on Seat and back all as details shown in the drawing. PVC seat and back shall be of make Blow plast/ Cello/ Polyset/ Brite/Amko/Comfo (which conforms to specfications) as approved by GE (FD/MAP-II/15)
66Removing of old PVC shoe and S&F hard PVC shoe complete all as specified and directed (FD/MAP-II/15)
67M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed. (FD/MAP-II/15)
68REPAIR TO TABLE OFFICE CLK/TYPIST STEEL : FD84(M)1004
69Taking down old u/s Top and Supply and fixing top made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE /Engr-in-Charge.
70Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.
71Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge MS sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.
72All as per item No 11.03 above but Short rails
73All as per item No 11.03 above but Stiffener
74All as per item No 11.03 above but Legs
75M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.
76Removal of old U/S lock and S&F new lock of 06 levers of make Godrej / Link / Harrison with two keys completed all as specified and directed.
77Removal of old U/S shoe and S&F new shoe as per shape and size complete all as specified and directed.
78REPAIR TO TABLE OFFICE OFFICER STEEL : FD-84(M)/1003
79Taking down old u/s Top and Supply and fixing top made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE /EiC.
80All as per item No 11.02 here-in-before but drawer of Table Office Officer Steel
81All as per item No-11.03 here-in-before but long rail of Table Office Officer Steel
82All as per item No-11.04 here-in-before but short rail of Table Office Officer Steel
83All as per item No-11.05 here-in-before but Stiffener of Table Office Officer Steel
84All as per item No-11.06 here-in-before but Leg of Table Office Officer Steel
85All as per item No 11.07 here-in-before but painting of Table office officer steel
86All as per item No-11.08 here-in-before but Lock of Table Office Officer Steel
87All as per item No-11.09 here-in-before but shoe of Table Office Officer Steel
88CHAIR SCHOOL WITH HAND BOARD : FD/E6/MAP/05
89Removing of old PVC seat & back single piece and S&F new single piece PVC seat and back of 4mm thick with 4X10mm ribs running in longitudinal and transversal direction moulded integrally with seat of blow plast or equivalent complete all as specified and directed by Engr- in Charge
90Removing of old top openable hand board and S&F top openable hand board made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE /EiC.
91Removing of old PVC shoe and S&F hard PVC shoe complete all as specified and directed
92M&L for painting to chair School with hand board with one coat of synthetic enamel black paint including preparation of old painted MS pipe and shelf surfaces complete all as specified and directed
93BED HARD : FD/E6/MAP/08 (R)
94M&L for removing of old/broken ply wood of existing beds and supply and fix new commercial ply wood 12mm thick BWR type confirming to IS-303 as per existing shape and size as shown on drawing complete all as specified and directed
95Removing of old/broken head rest and S&F new head rest made of 18/19mm MDF board as per exisiting shape and size complete all as specified and directed.
96All as per item No 13.02 above but Foot rest of Bed Hard.
97M&L for de-rusting, denting, scrapping of all MS portion and applying two coat of synthetic enamel paint by spray painting of approved shade as specified and directed.
98S&F nut and bolts of required size of Bed Hard
99CHAIR WRITING (MAP) : FD/E6/MAP/12
100Taking out old/unserviceable seat and supply and fix new seat of suitable size made of 12mm thick hot pressed ply wood with fabric of good quality and moulded polyurethane foam with PVC tipping all around complete al as shown on drawing
101All as per item No 15.01 above but unserviceable back complete.
102Taking out old broken/u/s arm rest of chair writing steel and supply and fix new arm rest made of plyurethane and rein forced with MS insert and shall be hard scratch and weather resistant.
103Preparaton of old painted suraface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubler frame of chair writing (MAP) complete all as specified & directed.
104TABLE 3 X 2 WITH DRAWER STEEL : FD-1008
105Taking down old u/s Top and Supply and fixing top made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE /EiC.
106Removing old broken drawer from existing tabe 3X2 and providing new steel drawer made of 1mm thick MS sheet duly painted with two coates of OG synthetic enamel paint over a coat of red oxide primer as directed.
107Removing of existing unserviceable lock from the drawer of table and supply & fixing new SS lock with duplicate keys complete as directed.
108M&L for de-rusting, denting, scrapping of all MS portion and applying two coat of synthetic enamel paint by spray painting of approved shade incl S&F new shoe to each leg as specified and directed.
109Chair revolving with Arms : TP
110Removing of old unsv cushion seat from chair and supply & fixing new cushion seat as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed by Engr-in-Charge.
111Removing of old unsv cushion back from chair and supply & fixing new cushion back as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed by Engr-in-Charge.
112Removing of old unsv arms from chair and supply & fixing new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.
113Removing of old unsv castors wheel from chair and supply & fixing new twin wheel castors as per existing size and shape complete all as specified and as directed by Engr-in-Charge.
114Removing of old unsv 5 pronged base and new 5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors as specified and directed.
115Removing and S&F of new hydraulic mechanism / gas lift of 100mm stroke length and gas pressure of 300N force as existing.
116M&L for de-rusting, denting, scrapping of all MS portion exposed to view and applying two coat of synthetic enamel paint by spray painting of approved shade as specified and directed.
117Teapoy Varandah : FD-255
118Taking down old u/s Top and Supply and fixing top made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE.
119New hard rubber shoe for the legs.
120M&L for painting of frame with one coat of synthetic enamel paint white after preparation of steel surface.
121Table Steel 900 x 900 x 760mm : FD-291
122Taking down old u/s Top and Supply and fixing top made of 18/19mm thick MDF board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification and shade of lamination sheet wiil be directed by GE /EiC.
123New legs made out of 25 mm square tube 1.6 mm wall thickness.
124M&L for de-rusting, scrapping of all MS portion and applying two coat of synthetic enamel paint by spray painting of approved shade incl S&F new shoe to each leg as specified and directed.
125FORM WITHOUT BACK : FD-1027
126M&L for scrapping old wooden plank and applying melamine polish after preapartion of surface as directed by GE /Engr-in-Charge.
127Removing old u/s wooden plank and S&F new 1st class hard wood teak wooden plank of size 255mm x 1525mm /1900mm of 25mm thick duly polished with two coats Melamine polish.
128M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting two coat of synthetic enamel paint complete all as specified.
129RACK ADJUSTABLE STEEL 5/6 SHELVES : FD-1038
130Removal of old existing U/S shelves of Rack steel and S&F new shelves made of 1 mm thick MS sheet as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.
131Taking out old broken legs and S& F new legs of mild steel angle iron 40mm x 40mm x4mm to side rack all as specidied in drg and as directed.
132M&L for spray painting with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.
133S&F nut and bolts of required size.
134Table Bed Side (MAP) FD/E6/MAP/15(R) :
135Removing and S & F Top of 18mm prelaminated MDF board with PVC edging of size 450X450 mm fixed to steel frame with 25mm projection on three sides.
136Removing and S & F Bottom portion of upper and lower drawers of 6 mm BWR Gr commercial plywood.
137Removing and S & F Front portion of upper drawers with 18mm prelaminated MDF board with PVC edging screwed to 12 mm plywood.
138Removing and S & F Front portion of lower drawers with 18mm prelaminated MDF board with PVC edging screwed to 12 mm plywood.
139Removing and S & F Sides of upper drawers of 12 mm BWR Gr commercial plywood.
140Sides of lower drawers of 12 mm BWR Gr commercial plywood.
141S & F Telescopic channels of make Ozone / Hettich for upper and lower drawers.
142Removing and S & F Back with 6mm plwood inside the top frame work.
143Removing and S & F Handle of upper and lower drawers as per approved sample.
144Rubber Shoes for legs as per approved sample.
145M&L for painting with black enamel paint to all MS portion complete all as specified and directed.
146M&L for Locker Bed Side Hospital scraping, denting & filling of unvenen surfaces with putty of best quality for smooth finish and applying two coats of synthetic enamel paint of approved shade by spray painting over a coat of red oxide. Rest all as directed by Engr-in-Charge. (HFD-2006) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58339144
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 32 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair To Steel Furniture Under Ge (W) Agra
Basic Detail
Tender No 8012/1230/E8
Bidding Type Tender
Location
City Agra
State Uttar Pradesh
Key Dates
Publish Date 02 Nov 2026
Submission Date 23 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 32 Lakhs
Tender Fee 500
EMD 64000
Exemption Not Available
Document List
03546bed-11ac-4c0c-8e68-284b27162afe.html
1230Tender.pdf
BOQ_893884.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

03546bed-11ac-4c0c-8e68-284b27162afe.html

pdf

1230Tender.pdf

xls

BOQ_893884.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender