Tender For Addition/Alteration /Improvement To Bldg No P-264 And Improvement To Cook House At Offrs Mess At Af Stn Utarlai
Tender Value
46.73 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
13 days left
EMD
93460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration /Improvement To Bldg No P-264 And Improvement To Cook House At Offrs Mess At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises all as directed |
| 2 | M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm or 450 x 300 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces. |
| 3 | Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 1.2 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 4 | M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6. |
| 5 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive backing coat of tiles etc on vertical surfaces of walls all as specified and directed. |
| 6 | M&L for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed. |
| 7 | M & L for Forming jambs in cement mortar 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work,also facing, jointing and pointing to match existing work, complete all as specified and as directed. |
| 8 | M& L for Making good under cills or over arches, lintels and bressummers including allpinning when necessary cement mortar complete all as specified and as directed. |
| 9 | M&L Pre-cast cement concrete block masonry with solid blocks 1:3:6 , exc. 10 cm in width and setting in mortar CM 1:6, complete all as specified and directed. |
| 10 | M&L for rendering 10mm thick in CM 1:4 on brick/concrete surfaces finished even and smooth without using extra cement all as directed. |
| 11 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 12 | M&L for rendering 15mm thick in CM 1:6 on brick/concrete surfaces finished even and smooth/grit type plaster as per direction of Engr-In-Charge using water proofing compond and finish the surface even and smooth without using extra cement complete all as specified and directed.Note:-WPC will be measured and paid separately |
| 13 | Supply only intergral water proofing compound. |
| 14 | M&L Preparation of New plastered Surface of wall and applying two coats of Exterior Emulsion Paint over one Coat Primer complete all as specified. |
| 15 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of acryclic distemper white or tinted, over a coat of avg 2 mm thick putty complete all as directed. |
| 16 | Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed. |
| 17 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in sub base of floor all as specified. |
| 18 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded as in sub base under floor tiling complete. |
| 19 | Demolition stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar |
| 20 | M&L for 20mm thick granite tile (of any type) work (table rubbed and polished) in floor ,steps, jambs, pillars,vertical surface, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite and round to the edge of stone slab on platform complete all as specified and directed. |
| 21 | Material & Labour for Machine cut kota stone slab flooring 20-25mm thickincluding 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match the shade of the slab including rubbing and polishing complete |
| 22 | Taking up or down steel tubing pipe and connections 15mm bore complete all as specified |
| 23 | Taking up or down steel tubing pipe and connections 20mm bore complete all as specified |
| 24 | S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, |
| 25 | S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, |
| 26 | S&F in reapir 15mm bore bib tap cast copper alloy chromium plated long body fancy type fixed to iron pipe or CP nipple/sockets complete all as specified and as directed. |
| 27 | S&F in repair CP Grating dome square/circular 100/125 mm size with or without hole complete all as specified and as directed. |
| 28 | S&F in reapir 15mm bore urinal spreader cast copper alloy chromium plated long body fancy type fixed to iron pipe or CP nipple/sockets complete all as specified and as directed. |
| 29 | S & F in repair 15mm bore Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed. |
| 30 | S&F in repair 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions. |
| 31 | Supply and fixed in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with \\"P\\" or \\"S\\" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge . |
| 32 | Supply and fixed in repairs urinal full mounted fasionable type of large size and with superior specification etc. complete in all respect as specified and directed by Engineer-in-Charge . |
| 33 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 34 | S&F in repair cast iron floor trap 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified. |
| 35 | S&F in repair cast iron Nahani trap 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified. |
| 36 | S & F in repair 100mm dia of outlet for WC's without grating jointed in cement CM 1:2 complete all as specified and directed. |
| 37 | S&F in repair 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured). |
| 38 | S&F in repair 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) jointed in cement CM 1:2 complete . |
| 39 | S&F in repair 100 mm CI connection socket/ bend/ Branch piece to fit out let of WC or other places as required CI bend/Tee with oval access door jointed in cement CM 1:2 complete |
| 40 | Dismantling of CI drain pipes 75/100mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed . |
| 41 | S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed. |
| 42 | S&F cast iron soil, waste and vent pipes of mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed. |
| 43 | S&F 75mm bore cast iron cowl complete all as specified. |
| 44 | S&F in repair PVC connection 15mm size with PTMT nuts of length 60cm long and fixed complete. |
| 45 | S&F 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed. |
| 46 | S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed. |
| 47 | S & F in repair for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed. |
| 48 | S&F in CP towel rack with towel hanging arrangements rail 600mm long fixed with screws and wooden/plastic cleats complete. All as directed by Engr-in-charge. |
| 49 | S&F straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge. |
| 50 | S&F diamond cut looking mirror with fancy metal frame of 10 mm thick complete all as specified and directed. |
| 51 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/false ceiling /slabs/wall panelling blankets, any thickness, including cover fillets and framing complete |
| 52 | M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre inluding Hangers of G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed. |
| 53 | S & F Seamless calcium silicate 12mm ceiling madeout of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified & directed. |
| 54 | M & L for applying plaster of paris putty of 2 mm thickness over and including complete removal of existing treatment on old plastered surfaces of ceiling and applying two coats of Distempering with 1st quality acrylic distemper plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 55 | Taking down windows / ventilators / doors frames etc exc 1.5 sqm and n.exc 4 sqm each with shutter (without taking off shutters from the frames). |
| 56 | Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each with gas cutter or any other instrument if any complete all as specified and directed. |
| 57 | S&F powder coated aluminum brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers key ,pivot 1 nos in each shutter with heavy duty floor spring assembly , glazing with 5mm thick tinted glass in upper panel and lower panel including rubber gasket, aluminum beading dust proof compete powder coating not less than 50 micron all as directed. |
| 58 | Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. |
| 59 | Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of acryclic emulsion paint of required shade and colour complete, as per manufacturer's specification. |
| 60 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives including door frame complete all as specifiied and directed. |
| 61 | S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of old pipe complete all as specified and directed by Engineer-inCharge. |
| 62 | S&F PVC (SWR) 110 mm bends any radius complete all as specified and directed by Engineer-inCharge. |
| 63 | S&F PVC (SWR) junction single, (Single T) equal or unequal of any radius complete all as specified and directed by Engineer-inCharge. |
| 64 | M & L for Providing, cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded, coping or chamfered on edges etc complete all as specified and directed. |
| 65 | M&L for providing Micro concrete at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine incl necessary formwork required etc all as specified and directed. Make: Renderoc RG MICROCONCRETE of Fosroc or equivalent in Dr Fixit/ACC/ L&T/STP/Sika India/ asian paints/bostik/Choksey chemicals/ Thermax ltd/ BASF/Hindcon Chemicals . (Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height) |
| 66 | M & L for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet with curved at one end of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, as in sunsheds, chajjas , fixed with self tapping screws including taking down old sheets complete all as specified and directed. |
| 67 | M & L for 2mm thick polycarbonate sheeting plain type side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 68 | Material & Labour for providing and fixing stainless steel (Grade 304) made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete all as specified and directed. |
| 69 | M & L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and including dismantling complete as specified and directed by Engineer-In-Charge |
| 70 | M&L preparing new steel surfaces over 10 cm in width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 71 | M&L preparing surface and applying twpo coat of aluminium paint over a coat of primer on welded mesh etc complete all as specified and directed. |
| 72 | S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with flat welding and necessary arrangement if any to made with welded mesh existing iron frame complete all as specified and directed |
| 73 | Providing precast cement concrete louvres and jallies (Type B1 1:2:4 (12.5 mm graded aggregate), 35 mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4. |
| 74 | Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description complete all as specifed and directed by engineer-In-Charge. (Note : The work shall be carried out upto 9.0M height) |
| 75 | M&L for Chipping of slab/columns/beams/chajjas/parapet/roof projection/ balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying Fosroc Reebaklens RR rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on surface of slab/columns/ beams/chajjas/ parapet /roof projection/balcony/staircase with Fosroc Renderoc SP40 or equivalent in Dr Fixit/STP/Asian paints / Sika /Bostik/ CICO/Choksey chemicals/ Thermax ltd/Hindcon chemicals applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika/Choksey chemicals/Thermax ltd/ CICO as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete along with 20mm thick cement plaster in CM 1:3 with added integral water proofing compound @ 100ml/50kg cement including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.0 M height through authorised applicator and the same shall be got first approved from the GE before commencement of work. ) |
| 76 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using platevibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all a sspecified and directed. |
| 77 | M & L for toughened etched glass door 12mm thick incl with fixed frame floor mounted with 2 Nos SS handle min 450 mm size in each leaf decorative type inluding all fixing arrangements as per manufacturer instruction approved by GE complete all as specified and directed. |
| 78 | M & L for toughened etched glass 12mm thick of overall min size 2.7 X2.1/2.2 m sensor doorwith heavy motor typicall 150 W capable of handling min 150 kg per leaf with microwave motion sensoe installed at top of doorpaired with safety photoelecetric beam sensors with controller incl inluding all fixing arrangements as per manufacturer instruction approved by GE complete all as specified and directed. |
| 79 | Taking down windows / ventilators / doors frames etc n.exc 1.5 sqm each with shutter (without taking off shutters from the frames). |
| 80 | Taking down doors with frames of exc 1.5 sqm each with shutter (without taking off shutters from the frames). |
| 81 | S&F three track powder coated aluminum sliding window with three sliding shutter , the size of outer frame three track 90 x 30x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency / tinted glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings powder coating not less than 50 micron complete all as specified and directed. |
| 82 | S&F fixed type powder coated aluminum ventilators fixed type with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and powder coating not less than 50 micron incl all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified. |
| 83 | S&F three track aluminum powder coated sliding window with three sliding shutter at upper portion and lower portion shall be fixed glazed and openable glazed shutter for provision , the size of outer frame three track 9 0x 30x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency/ tinted glass of poly carbone including all-around suitable rubber gasket and tracking arrangement each sliding window shall be provided with one number locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and 0.36mm dia stainless steel wire cloth and average aperture 1.4mm all necessary fittings complete all as specified and directed. |
| 84 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of primer all as directed. |
| 85 | M & L for applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 86 | M&L for rounding to the edges of granite stone slabs for kitchen platform and window cills etc complete all as specified and directed. |
| 87 | M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6. |
| 88 | Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 89 | S&F PVC low level fushing cistern 10 liters capacity including 32mm dia down pipe,brackets etc complete all as specified and directed by Engineer-in-Charge. |
| 90 | S & F in repair CP swivel shower 150 x 150mm with shower arm 15mm dia and 195 mm long with bent of 45 degree with flange.Complete all as specified and directed. |
| 91 | S & F in repair angle/stop valves cast copper alloy chromium plated with long shank , screwed both ends for iron pipe 15mm bore, Complete all as specified and directed. |
| 92 | S& F in repairs brass chromium plated health faucet of approved make and standared size with necessary chromium plated finish flexible pipe of min length 1.0 mtr inlcuding all other arrangements of 15mm bore and fixed complete all as specified and directed. |
| 93 | S&F in repair choromium plated soap dish complete all as specified and directed. |
| 94 | S&F in repair chromium plated long body pillar tap 15 mm dia cast copper alloy with capstan head , screwed down high presure with or with out lettered fixed with iron pipe, Complete all as specified and directed. |
| 95 | S&F in repairs CP towel rail 600mm long fixed with screws and wooden/plastic cleats complete. All as directed by Engr-in-charge. |
| 96 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of PTMT checknuts and washers complete. All as directed by Engr-in-charge. |
| 97 | S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed |
| 98 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 99 | S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised . |
| 100 | S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 101 | S&F 150mm long aluminum alloy handles fabricated type, anodized complete as specified. |
| 102 | S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 103 | S&F in repairs Vitreous china water closet (Sqating Pattern) \\"Orissa Pattern\\" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl re-fixing old Cistern, flush pipe etc if required & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed. |
| 104 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified. |
| 105 | S&F 100mm size stainless steel handle with stainless steel screws fixed to kitchen cupboards / drawer complete all as specified and directed. |
| 106 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws complete all as specified and directed. |
| 107 | S&F 18/19mm WPC board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboards, alimirah shutters or other places complete all as specified and directed. (Sample like colour shall be as approved by GE) |
| 108 | S&F 3way 3D hydraulic auto adjustable (Soft closed) concealed cabinets hinges stainless steel grade 202 with chrome nickle finishes each size 116x60mm mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge. |
| 109 | M&L for 100mm thick PCC 1:2:4 Type B2 using 20mm graded stone aggregate as in flooring incl roughening of old surface complete all as specified and directed. |
| 110 | Taking down copper/Aluminum point wiring (light,fan,bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent,regulators,sockets,light fitting etc.Removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 111 | M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit heavy duty ISI marked of white/ivory colour including all accessories heavy duty ISI marked after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- |
| 112 | One light point controlled by one way switch 5 Amps. |
| 113 | One fan point controlled by one way switch 5 Amps. |
| 114 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board |
| 115 | One 3 point 5 Amps switch socket outlet point controlled by one switch on independent board |
| 116 | S&F switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed. |
| 117 | S&F modular socket multipurpose 5 pin, 6/5 Amp flush type, 240 Volts complete all as specified & directed. |
| 118 | S&F modular switch piano flush type,single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed. |
| 119 | S&F modular socket 2 in 1, 3 pin, 16/15 Amp flush type, 240 Volts complete all as specified & directed. |
| 120 | S&F ceiling rose, surface bakelite, three terminals complete all as specified & directed. |
| 121 | S&F stepped type electronic fan regulator flush modular 2 module type complete all as specified & directed. |
| 122 | Description all as per item no-111 here in before but using 2.5 sqmm single core copper condutor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 16/15 Amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 123 | S&F LED Rope lioght 144D Strip 3000 K IP65 warm white complete with adaptor of suitable capacity and all accessories including all as specified and as directed by Engr-in-charge. |
| 124 | S&F Aluminium housing cassing of suitable size for installation of LED rope including diffused plastic capping including all accessories complete all as specified and directed. |
| 125 | S&F Adaptor suitable for LED Rope of 50M and 18M complete all as specified and as directed by Engr-in-charge. |
| 126 | S&F Polycarbonate 15 W Round LED Panel Ceiling color changing light (Cool white/Warm white/Natural White) with complete accessories all as specified and as directed by Engr-in-Charge. |
| 127 | S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 128 | S&F Light light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through three mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and as directed. |
| 129 | S&F mirror light fitting 8/10 Watt with flexible arm, metalic for easy movement for directional and glance single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed. |
| 130 | S&F ceiling fans complete with remote, blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old ceiling fans all as specified and as directed. |
| 131 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 132 | S&F Exhaust fan of size 250mm sweep ventilator square/ round, PVC body with louver single phase suitable for Each 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan including cutting hole in existing brick/block/stone wall for providing suitable opening on wall and fixing on existing wall with fixing arrangements and making good disturbed surfaces complete all as specified and directed |
| 133 | Removing and refixing of ACs (1 TR to 2 TR) including inner and outer unit including refiling of suitable Gas and repair the damage insulation complete. |
| 134 | S&F for PVC non-metalic rigid conduit ISI marked heavy duty white/lovry colour and its accessories heavy duty ISI marked of size 25 mm dia for LAN, telephone and TV connections including cutting chasses and making good disturbed surface to match with existing finish with plaster inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. |
| 135 | S&F for PVC non-metalic rigid conduit ISI marked heavy duty white/lovry colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting chasses and making good disturbed surface to match with existing finish with plaster inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. |
| 136 | S&F Single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SPN 20 AMPs including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces & fixing the same complete all as specified and directed complete. |
| 137 | M&L for sub main wiring with 2x4 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable onecomplete all as specified and directed.NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 138 | M&L for sub main wiring with 2x6 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed.NOTE: (a) Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 139 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core and taking down unserviceable cable |
| 140 | Excavation in trenches n.exc 1.5 mtr wide n.exc 1.5 mtr in depth and getting out in hard/dense soil for laying of cable/errection of poles /stay assembly etc complete all as specified and directed |
| 141 | Material and labour for clean dry tibba sand in trenches/ dusts for cushoning to cable complete all as specified and directed |
| 142 | Returning, filling in excavated material (soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified |
| 143 | Removing excavated material to distance n' exc 50m and depositing whre directed at a level n exc 1.5m above the starting point complete all as specified |
| 144 | Supply and laying 40mm nominal bore \\"medium grad', galavanised tubes for routing and mechnical protection of XLPE insulated and PVC sheathed power cable with all fitting, laid in trenches and directed by Engr-in-Charge |
| 145 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 95 sqmm 4 core and taking down unserviceable cable |
| 146 | Laying & fixing existing XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 95 sqmm 4 core LT UG cable in DWC pipe by cutting existing PCC, making trench of required size, laying DWC pipe and cable, refilling and compacting , reinstating PCC to original thickness and finish , including all labour, T&P, excavation, sand cushioning, commissioning and making good complete in all respects as directed by Engr-in-charge. |
| 147 | Supply and laying Double wall corrugated HDPE duct pipe 40mm outer dia confirming to IS: 16098 of approved colour with fittings for strip protection laid in trenches etc complete all as specified and directed. |
| 148 | Supply and laying Double wall corrugated HDPE duct pipe 90mm outer dia confirming to IS: 16098 of approved colour with fittings for strip protection laid in trenches etc complete all as specified and directed. |
| 149 | Supply ,fixing ,testing and commissioning of sensor based high velocity Air Curtain suitable for 1500 mm (5 feet) wide door opening, wall-mounted type, complete with powder-coated CRCA steel/aluminium body, dynamically balanced cross-flow blower , heavy duty motor operating on 230V AC, single phase, 50 Hz supply, minimum air velocity 18-21 m/s, air delivery not less than 2500 CMH, two speed operation, thermal overload protection, ON/OFF switch with speed control , mounting brackets, anchor fasteners, electrical connections from the nearest power point, testing, trial run and commissioning complete in all respects, as directed by the Engr-in-charge. |
| 150 | S&F MCCB DB CRCA sheet powder coated VTPN DB LL 4 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 151 | S&F MCCB 4 pole 100 Amps, 50Hz, 415 Volt with rupturing capacity 16 KA. |
| 152 | S&F MCB DB CRCA sheet powder coated SPN 12 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 153 | S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed. |
| 154 | S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed. |
| 155 | Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazing/welding properly up to main board including earth pit in cement concrete 1:2:4 type B-1, MS sheet pit cover of checked plate 6mm having angle iron frame 25x25x3 with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point complete all as specified and testing on completion complete incl taking down old u/s earthing all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and MS cover made out of 6mm thick checkered plate hinged both end for open & close for pit etc & no extra payment will be made. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender