Tender For Addition/Alteration To Bldg No Lsm-01 Under Ge Shillong
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
8 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No Lsm-01 Under Ge Shillong
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Nov-2026 | BOQ CORRIGENDUM | BOQ | 23-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each including making good distyrbed surfaces complete all as specified and directed. |
| 2 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each including making good disturbed surfaces complete all as specified and directed. |
| 3 | Demolition of PCC block masonry, brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and directed. |
| 4 | Dismantling fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work complete all as specified and directed. |
| 5 | Demolition of plain cement concrete (unreinforced) in ground floors or above ground floor and pavings n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed. |
| 6 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital,AC Sheets or similar pattern as in roof coverings complete all as specified and directed. |
| 7 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed. |
| 9 | Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed. |
| 10 | Dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and directed. |
| 11 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed |
| 12 | Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any dismeter in soft/loose soil and getting out complete all as specified and directed |
| 13 | Returning and filling including spreadking levelling watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and directed |
| 14 | Removing excavated material at a distance n exc 50m and deposited where directed at a level not exc 1.5 above the starting point for soft/lose soil complete all as specified and directed |
| 15 | M&L for PCC 1:4:8 Mix, type D2 (using 40mm graded crushed stone aggregate) as in foundations, fillings and mass concrete complete all as specified and directed. |
| 16 | M&L for RCC (Nominal Mix) using cement concrete 1:1.5:3 Mix, type A1 (Using 20 mm graded crushed stone aggregate) for foundations, including raftfs, footings , plinth beams, bases for columns etc complete all as specified and directed. |
| 17 | M & L for Reinforced cement concrete (Nominal Mix), using cement concrete 1:1.5:3 Mix, Type-A1, (Using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 18 | M&L RCC( nominal mix), using cement concrete 1:1.5:3 Mix (Using 20mm graded crushed stone aggregates ) as in beams, cantilevers, lintels over 1.50m span etc complete all as specified and directed. |
| 19 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, fair finished surfaces of concrete flat complete all as specified and directed. |
| 20 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finished surfaces of concrete complete all as specified and directed. |
| 21 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., fair finished surfaces of concrete complete all as specified and directed. |
| 22 | S&F TMT steel bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for fencing, columns, beams, etc. hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed.Note: Weight of biniding wire shall not be considered for payment. |
| 23 | All as per item No. 22 here in before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed. |
| 24 | Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil complete all as specified and as directed. |
| 25 | M&L for PCC 1:2:4 Mix, type B2 (using 40mm graded crushed stone aggregate) as in foundations, fillings and mass concrete complete all as specified and directed. |
| 26 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 27 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre using Hangers 40 mm flat. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long to received 12 mm thick calcium silicate board complete all as specified and as directed . |
| 28 | S&F 10mm thick coloured PVC panels with ply wood or any metal base stuck to colour PVC sheet suitably placed in false ceiling/wall panelling, grid made of Aluminium/G.I./M.S. or wooden fillets as per specification and drawing complete all as specified and directed. |
| 29 | S&F for 5mm thick solid coloured WPC/Charcoal louvers panel with ply or metal base stuck sheet suitably placed in false ceiling/wall panelling, grid made of Aluminium /G.I./M.S. or wooden fillets as per specification and drawing all as specified and directed. |
| 30 | M&L for Seamless 12mm thick calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of faceboard with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) incl any sunk or raised shape or design complete all as specified and directed. |
| 31 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and directed . |
| 32 | M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the GE fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 33 | M&L for plain fillets, square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm complete all as specified and directed. |
| 34 | M&L for second class hard-wood scantlings, clean sawn timber fixed and framed complete all as specified and directed. |
| 35 | Supply and fixing 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 36 | S&F 35mm thick Flush door shutters, solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed. |
| 37 | S&F 18/19 mm thick block boards fixed with screws to timber frame complete all as specified and as directed. |
| 38 | S&F 12mm thick Plywood, grade BWR, type BB, No of ply 07, fixed with screws to timber frame work complete all as specified and directed. |
| 39 | S&F 0.90 mm thick PVC decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 40 | M&L for Providing and fixing PVC edge lipping, of approved make, colour, shade and thickness, to the exposed edges of kitchen cabinet shutters, drawers, shelves and other cabinet components, using approved adhesive, including cutting, fitting, pressing, trimming, rounding/chamfering of edges and making the surface smooth and neat, complete in all respects all as specified and directed. |
| 41 | S&F magnetic catches, brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 42 | S&F W-hinges 75mm, medium weight, stainless steel and fixed complete all as specified and directed. |
| 43 | S&F W-hinges 125mm, medium weight, stainless steel and fixed complete all as specified and directed. |
| 44 | S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 45 | S&F 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 46 | S&F 150 mm long extruded brass handles, fabricated type polished complete all as specified and directed. |
| 47 | S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 48 | S&F 6 lever Brass Matte finish door handle of 200mm long with 1xmortice lock, 1xstriker plate, 1xsquare shank including keys and all other necessary accessories fixed , colour and design as approved by GE complete all as specified and directed. |
| 49 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 50 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 51 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 52 | S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed. |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 54 | S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and directed. |
| 55 | S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane fixed to aluminium frame in each pane complete all as specified and directed. |
| 56 | M&L for Precast PCC (1:3:6 Mix), type C1 (using 20mm graded crushed stone agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) including demolition of Precast cement concrete block walling in any position complete all as specified and directed. |
| 57 | M&L for Precast PCC (1:3:6 Mix), type C1 (using 20mm graded crushed stone agg) solid block masonry not exc 10cm in width or girth and setting CM (1:4) complete all as specified and directed. |
| 58 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. |
| 59 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. |
| 60 | M&L for 25 mm thick PCC, 1:2:4 Mix, type B0 (using 12.5mm graded crushed stone aggregate) as in sub base finishing even and rough to receive floor finishes complete all as specified and directed. |
| 61 | M & L for Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick CM 1:4 screed, complete all as specified and directed. |
| 62 | M&L for Virified Ceramic tiles coloured tiles 9 to 10 mm thick, area of each tile exc 0.42 sqm but n exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 63 | All as per Item No 61 here–in–before but on vertical surfaces such as skirtings and risers to steps etc. over and including 10mm thick rendering in CM 1:4 as in backing coat complete all as specified and directed. |
| 64 | M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer, 15 mm thick for laying floor finishes in CM (1:6) complete all as specified and directed. |
| 65 | M&L for vitrified ceramic tiles dark shed (exterior grade), 10 mm thick (square / rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over and including 15 mm thick screed bed 1:6, set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed. |
| 66 | M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 67 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 68 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed. |
| 69 | M&L for rendering 10mm (in cement mortar 1:6) thick on block masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed. |
| 70 | M&L for rendering 15mm (in cement mortar 1:4) thick on block masonry surfaces or surface on the other side of lathing complete all as specified and directed. |
| 71 | M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) as backing coat and 5 mm th in CM 1:4 using finishing the surface even and smooth without using extra cement and top layer shall be mix with water proofing compound as per manufacturer's instructions complete all as specified and directed.Note:- WPC shall be measured & Paid separately under respec tive item of BOQ. |
| 72 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 73 | S&F bevelled edge looking mirror of selected quality glass, mounted on chromium plated brass holder's and screws or on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 74 | S&F Bib taps, cast copper alloy, fancy type, CP, 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 75 | S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified . |
| 76 | S&F for 12mm thick toughned glass as in bathroom partitions including one hinged door, partition fixed with floors and wall , including one openable door with self closing arrangement fixed with stainless steel connectors to glass and similar work including cutting to shape, drilling holes and fixing with single leg spider , ceiling/bottom SS 304 connectors wall to glass and glass to glass of required sizes , all necessary fittings upto all height incl scaffolding complete all as specified and directed. |
| 77 | Supply and fix brass extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed (ISI Marked) complete all as specified and directed. |
| 78 | S&F Vitreous china table top basin - white matt , Kubix prime range of Jaquar of size 600x440x150mm or equivalent in Cera/ Hindware including 32 mm waste coupling with chromium plated bottle trap (Jaquar Cat part No-KUS-WHM-35931PM or equivalent in Cera/ hindware) complete all as specified and directed. |
| 79 | S&F 15 mm bore brass CP basin mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed for latest styles, quality features, performance and lasting durability, sleek single-lever tall-boy mixer with ergonomic control and smooth water flow finished in stylish chrome, complete all as specified and directed.Make: Jaquar Table Mounted Tall Boy Basin Mixer FON-CHR-40005B or equivalent in Cera/ Hindware |
| 80 | S&F 12 mm thick toughened frosted/milky glass urinal partitions, of suitable size and 900 mm height above finished floor level, or as directed by Engineer-in-Charge, made from good quality clear float glass, fully toughened and heat-treated, with uniform opaque/milky finish and machine-polished exposed edges, including all necessary heavy-duty stainless steel Grade 304 brackets, clamps, channels, supports, wall/floor fixing accessories, anchor fasteners, screws and other required hardware, complete.The partition shall be suitably supported and securely fixed with adequate floor/wall clearance as required for urinal installation and cleaning, with all exposed edges and corners neatly finished. Glass shall be free from scratches, bubbles, distortion and other visible defects. Rate shall include cutting, drilling, edge polishing, transportation, handling, fixing and all incidental works, complete all as specified and directed. |
| 81 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 82 | S&F glass corner shelf with bracket of (Jaguar Cat Part No CAN-CHR-1173 or equivalent in Cera/ Hindware) complete all specified and directed |
| 83 | S&F Soap dish holder with bracket of (Jaguar Cat Part No AKP-CHR-35731P or equivalent in Cera/ Hindware) complete all specified and directed |
| 84 | S & F Towel rack 600mm long with lower hangers , stainless steel complete all as specified and directed. Make: Jaquar Cat Part No-AKP-35781PS or equivalent in Cera/ Hindware |
| 85 | S & F Towel ring, stainless steel complete all as specified and directed.Make: Jaquar Cat Part No-AKP-CHR-35721P or equivalent in Cera / Hindware |
| 86 | S & F Toilet paper roll holder, stainless steel complete all as specified and directed. Make:Jaquar Cat Part No-AKP-CHR-35753PS or equivalent in Cera/ Hindware |
| 87 | S&F white vitreous china full stall urinal, of approved pattern and size, conforming to IS 2556 (Part 6):2021 and relevant requirements of IS 2556 (Part 1), complete with integral flushing arrangement/flush inlet and outlet, including vitreous china/SS flushing spreader, suitable waste outlet, trap and all necessary fittings and accessories incl 15 mm dia stainless steel stop cock/angle cock, stainless steel/CP connecting pipe or flexible connector, unions, nuts, washers, wall plugs, screws, brackets/supports and all other required fixing and connection accessories, complete all as specified and directed. |
| 88 | S & F Vitreous China rimless single piece desgin WC including seat cover closed and flushing cistern with siphonic effect, tornado flushing , dual flush-2.6/4.6 LPF, anti germ glaze pattern single piece size 360x675x750mm complete all as specified and directed. Make: Jaquar Cat Part No- OPS-WHT-15853 S300UF or equivalent in Cera/ Parryware / Hindware |
| 89 | S&F 15 mm bore CP health Faucet cock with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 90 | S&F Twin-in-one bib taps, cast copper alloy, CP, fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule of make Jaquar or equivalent in Parryware/Prayad/Hindware complete all as specified and directed. |
| 91 | Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed including dismantling existing water tank complete all as specified and directed. |
| 92 | S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and directed |
| 93 | Taking up or down steel tubing and disconnection, for 15mm bore of pipe complete all as specified and directed. |
| 94 | Taking up or down steel tubing and disconnection, for 20mm bore of pipe complete all as specified and directed. |
| 95 | Supply and Laying of CPVC 16mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 96 | Supply and Laying of CPVC 20 mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 97 | S&F 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 98 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 99 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 100 | S&F PVC (SWR) bends 110mm dia complete all as specified and directed |
| 101 | S&F PVC (SWR) bends 75mm dia complete all as specified and directed |
| 102 | S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed. |
| 103 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and directed. |
| 104 | S&F in repairs 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as specified and directed. |
| 105 | S&F for 20 mm dia brass chromium plated brackets complete all as specified and directed. |
| 106 | M&L 75mm thick cement concrete using 1:4:8 Mix, Type D2 (Using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 107 | M&L for 75 mm thick cement concrete 1:2:4 Mix, type B-2 (using 40mm graded crushed stone agg) as in plinth protection finished even and smooth without using extra cement incl necessary joint filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed. |
| 108 | S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 109 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 110 | S&F designer 50mm wide wooden beading of any colour and design for any wooden structure or sides, top and bottom of wall panelling as approved by GE complete all as specified and directed. |
| 111 | M&L for French polish to wooden/veneer surfaces, including preparation of surface by cleaning, scraping/sanding and stopping of nail holes, cracks and imperfections with suitable wood filler, application of suitable stain/colour where required to obtain approved shade, followed by application of good quality French polish/shellac by pad/rubbing method in sufficient coats, with intermediate rubbing and smoothing, to produce a smooth, uniform, high-gloss and mirror-like finish bringing out the natural grain of the wood, complete in all respects as per approved sample and to the entire satisfaction of Engineer-in-Charge all as specified and directed. |
| 112 | S&F for Black Lotus Rain Chain for Gutters with Adapter, 8.5 FT Decorative Rain Chains for Gutters Outdoor, 12 Flower Cups Downspout Replacement with Heavy Crystal Pendant for Garden, Patio, Porch, fixed with eaves board or wooden/metal frame as in rain water pipe complete all as specified and directed. |
| 113 | M & L for preparation of new plastered/concrete surfaces of walls/ceiling, providing 1 mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified over and including a coat of primer complete all as specified and directed. |
| 114 | M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 115 | M&L for preparation of old steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 116 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 117 | M&L for preparation of old surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintcomplete all as specified and directed. |
| 118 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by washing rubbing down and stopping of any external painted surfaces and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and directed. |
| 119 | M&L for preparation of new plastered/concrete surfaces of walls of any external surfaces and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller etc complete all as specified and directed. |
| 120 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed. |
| 121 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, PVC conduit on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing complete all as specified and directed for one light/fan point controlled by one, one way switch. |
| 122 | Description all as per Srl item No. 121 here in before but for one bell point controlled by one bell push . |
| 123 | Description all as per Srl item No 121 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 124 | Description all as per Srl item No. 121 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 125 | Description all as per serial item No 121 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 126 | Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 127 | Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 128 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 129 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 130 | Supply and fixing Bell push, flush type, 5 amp 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 131 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. |
| 132 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed. |
| 133 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 134 | S & F LED light fitting /1X10W wall bracket luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 135 | Supply and fix Flexible LED strips complete all as specified and direcetd of make Jaquar cat part No. STI-WHT-LSTP03X005XW or equivalent in Wipro or Havells. |
| 136 | Supply and fix Flexible LED strips driver 30 Watts complete all as specified and direcetd of make Jaquar cat part No. ZCI-WHT-LDRV01SO30XX or equivalent in Wipro / Havells |
| 137 | S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and directed. |
| 138 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one complete all as specified and directed. |
| 139 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 140 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 141 | S&F Sheet metal enclosures with socket plug top & MCB single pole & neutral enclosure with a two pin & earth plug and socket complete with one single pole and neutral MCB -240 Volt- 20 Amps, 'C' series including taking down old unserviceable plug and socket complete all as specified and directed. |
| 142 | S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as specified and directed. |
| 143 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 144 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. |
| 145 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. Notes : (i) MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . (ii) Copper thimble shall be used for connection of cable . |
| 146 | Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 147 | Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down old unserviceable one including MCBs complete all as specified and directed. |
| 148 | Supply and fix MCB TPN 40-100 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. |
| 149 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series including taking down old one complete all as specified and directed. |
| 150 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed. |
| 151 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 152 | Material and labour for earthing complete with galvanized Steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized strip of 32 mm x 6 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion and demolition to existing one complete all as specified and directed. |
| 153 | Note for all items: If in BOQ, any item found repeated and contractor quotes different rates for the same, the lesser rate quoted by the contractor shall be admissible for payment and no claim of contractor, whatsoever, on this account shall be entertained by the Department. NOTE FOR ALL ITEMSIn case in BOQ any item found repeated and contractor quotes different rate for the same, the rate quoted on lesser side shall only be applicable for payment and no claim whatsoever on this account shall be entertained by the Department. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 23, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender