Tender For Special Repair To Bldg No 3Ft At Mh Lansdowne Under Age(I) Lansdowne
Tender Value
26.15 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
13 days left
EMD
52312
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No 3Ft At Mh Lansdowne Under Age(I) Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of colour, as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling of timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed. |
| 5 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencingincluding cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 6 | S&F Rolled sections Fe 410 -W (Gde- E- 250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 7 | Dismantling of boarding of any deescription and fixed in any position with nails complete all as specified and directed. |
| 8 | Fixing only clean sawn 2 nd class HW boarding complete all as specified and directed. |
| 9 | S&F for 20 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roof ceiling partition fascia barge soffit etc (except flooring and skirting) complete all as specified and directed. |
| 10 | Dismantling of wall and ceiling boards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. |
| 11 | S&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with semi perforated 12 mm thick micro tegular edged or 10 mm thick square edged of approved texture design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions. |
| 12 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 14 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 15 | M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. |
| 16 | M&L rendering 15 mm thick in CM 1:4 on fair faces of brick walling finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered surfaces of wall & applying two coats of Acrylic exterior Emulsion paint over a coat of suitable primer and applying two coat of wall care putty as per manufacturer instructions complete all as specified and directed |
| 18 | M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coat of distemper acrylic Emulsion paint after applying wall care putty as per manufacturer instructions complete all as specifed and directed. |
| 19 | Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level including removal of rubbish out side MOD land complete all as specified and directed. |
| 20 | M&L 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded stone agg) as in floor complete all as specified and directed. |
| 21 | M&L coloured glazed ceramic tiles 200 x 300 x 7mm/450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as backing coat to receive wall tiles/skirting/dados complete all as specified and directed . |
| 22 | S & F for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 24 | M & L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed. |
| 25 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed |
| 26 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- |
| 27 | Area not exc 1.5 sqm each |
| 28 | Area exc 1.5 sqm but not exc 4 sqm each |
| 29 | S&F 100mmx65mm Single rebated factory made 100% solid WPC door frame made from 100% LEAD free( Single extruded process) material with density 780 kg/Cum and manufacured by an ISO :9001-2015 certified company , all as per specification .The door frame should be water proof ,termite proof,fire retardent and having excellent screw holding capacity complete all as specified and directed. |
| 30 | S&F 125mmx65mm Single rebated factory made 100% solid WPC door frame made from 100% LEAD free( Single extruded process) material with density 780 kg/Cum and manufacured by an ISO :9001-2015 certified company , all as per specification .The door frame should be water proof ,termite proof,fire retardent and having excellent screw holding capacity complete all as specified and directed. |
| 31 | S&F 30mm thick molded WPC factory made 1005 solid door shutter (conforming as per IS:4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/Cum manufactured by an ISO :9001 -2015 certified company .the door should be water proof ,termite proof fire retardant and having screw holding capacity complete all as specified and directed. |
| 32 | S&F for 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 33 | Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed. |
| 34 | M& L for Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 35 | S & F in repair stainless steel drapery rod 25 mm dia including stainless steel brackets including fixing arrangements with drilling holes etc complete of approved quality complete all as specified and directed. |
| 36 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or wire staples complete all as specified and as directed. |
| 37 | S&F 12 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet and cupboard shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed |
| 38 | S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed |
| 39 | S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back sides complete as per manufacturer’s specifications complete all as specified and directed |
| 40 | S&F stainless steel continuous (piano) hinges, bright finish or electrogalvanised, width of flap (when open) 30 mm complete all as specified and directed. |
| 41 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. |
| 42 | S & F Magnetic catch suitable for cupboards complete all as specified and as directed |
| 43 | M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed. |
| 44 | S&F windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 74 X 60mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Flymesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinylchloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends . Gap between the bars should not be more than 150mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Black Gypsum Drywall screws should be used while fixng corner brackets,stay,hinges,mullion caps of windows. |
| 45 | S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified. |
| 46 | S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified. |
| 47 | S & F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 48 | S & F 100 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 49 | Taking up or down steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed :- |
| 50 | 15mm bore |
| 51 | 20mm bore |
| 52 | S&F galvanised steel water tubing 15 mm bore (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches complete all as specified and as directed. |
| 53 | S&F galvanised steel water tubing 20 mm (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches complete all as specified and as directed. |
| 54 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring,etc and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 55 | S&F gun metal globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed:- |
| 56 | 20 mm bore |
| 57 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floora nd provision of lime concrete bedding complete all as specified and as directed. |
| 58 | S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE/AGE(I) complete all as specified & directed. |
| 59 | S&F in repair 15mm bore angle stop valve , cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 60 | S&F in repair Soap dish any type fixed to plugs with chromium plated brass screws complete in all respect and fixed in position all as specified |
| 61 | S&F in repair 15 mm bore bib taps, chromium plated, fancy type, long body, cast copper alloy with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 62 | S & F in repairs CP gratings of 100 mm size with or without hole for waste pipe complete all as specified and as directed |
| 63 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated , Fancy type screwed down for pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed. |
| 64 | S&F in repair PVC connection 15 mm size with PTMT nut of following length complete all as specified and directed :- |
| 65 | 450 mm |
| 66 | S&F in repair Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed. Note:-(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and waste pipes as required shall be measured and paid for separately. |
| 67 | S&F in repair 5 mm thick bevelled edge best quality looking mirror of size 600x450 mm with 30mm PVC beading all around the glass, mounted over 6mm thick AC bldg board, or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. |
| 68 | S & F in rep CP waste coupling 32mm dia fittings, for basins etc with long screw shanks and fly nuts flange end bedded in red lead cement and other fixed complete all as specified and directed |
| 69 | S & F in rep CP waste coupling 40mm dia fittings, for Urinals etc with long screw shanks and fly nuts flange end bedded in red lead cement and other fixed complete |
| 70 | S & F in rep PVC waste pipe with adopter 40mm dia suitable for Sink complete all as specified and directed |
| 71 | Dismantaling water tanks and removing to store exc 500 but n exc 1000 ltrs complete all as specified and directed. |
| 72 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tank, white in colour triple layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and as directed |
| 73 | S & F in repairs towel rail 600 mm long fixed with chromium plated brass screw and wooden / plastic cleats complete all as specified and as directed . |
| 74 | Supply and fix in repair corner self fency type three tier with 5.50 mm thick glass mounted on cp brass frame fixed with brass screw & plug size in less than 450mm as suitable for bath room as per manufacturer instruction complete all as spd and directed |
| 75 | S&F in rep PVC fancy type cabinet with mirror n less than 450 x 600 mm size suitable for bath room complete all as spd and directed |
| 76 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified. |
| 77 | S&F in repair stainless steel plate rack (size 900x600x250 mm) of min thickness 0.80mm incl necessary drilling fixing with screw ,plugs in kitchen etc fixed in position complete in all respect as spd and directed . |
| 78 | S & F in repairs Chromium plated shower roses 15mm bore with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 79 | S&F in repair CP brass wall mixer 15mm dia mark hot and cold complete all as spd and directed |
| 80 | S&F in repair 20 mm bore Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 81 | Dismantling of PVC drain pipes up to 110 mm dia , jointed in cement mortar and taking out of trenches if required compound complete all as specified and directed. |
| 82 | Dismantling of PVC drain pipes up to 75 mm dia , jointed in cement mortar and taking out of trenches if required compound complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor of following size complete all as specified and as directed :- |
| 84 | 75 mm bore |
| 85 | 110 mm bore |
| 86 | S&F in repair PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface of following size complete all as specified and as directed :- |
| 87 | 110 mm bore |
| 88 | 75 mm bore |
| 89 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal of following size complete all as specified and as directed :- |
| 90 | 110 mm bore |
| 91 | 75 mm bore |
| 92 | S&F in repair PVC (SWR) vent cowl of following size complete all as specified and as directed :- |
| 93 | 110 mm bore |
| 94 | M&L for 100 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base of floor complete all as specified and directed. |
| 95 | M & L for chequered cement concrete tiles 30cm x 30cm x25 mm thick, finished, (ISI Makred) set jointed and pointed in neat cement slurry in floors with grey cement and pigment including screed bed 20mm thick in CM 1:6 complete all as specified and directed. |
| 96 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, complete all as specified and directed. |
| 97 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. |
| 98 | Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed. |
| 99 | Taking down carefully TPN DB/ MCB DB complete, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed. |
| 100 | Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continuous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed rigid PVC conduit(ISI marked) ,duly cutting chases & concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) including metal flush box made of GI sheet and white cover with making good the disturbs surfaces of wall/floor/ceiling complete all as specified and directed for the following.Note: Flush box and cover plate should be of same make all as approved for switches/sockets. |
| 101 | One light/fan/bell point controlled by one No modular type switch 6 Amps single pole one way |
| 102 | One 3 pin 6 Amps socket outlet on same board controlled by one, one way 6 Amps modular switch. |
| 103 | One socket outlet 5/3 pin 6 Amps controlled by one modular switch on independent board. |
| 104 | All as per item No 87here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLSH but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLSH cable as earthwire. |
| 105 | One light point controlled by one No modular type switch 6 Amps single pole Two way |
| 106 | S & F switch Modular single pole, one way 6 Amps , 1 module, 230 volts, 50 hz complete all as specified and directed. |
| 107 | S & F bell push Modular single pole, one way 6 Amps , 1 module, ISI marked, 230 volts, 50 hz complete all as specified and directed. |
| 108 | Supply and fix Modular switch 1 way 16 Amps, 1 module, 230 volts, 50 Hz complete all as specified and directed. |
| 109 | Supply and fix Modular Socket outlet, 6A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified and directed. |
| 110 | Supply and fix Modular Socket outlet, 16A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified and directed. |
| 111 | S & F switch Modular single pole, two way 6 Amps , 1 module, 230 volts, 50 hz complete all as specified and directed. |
| 112 | S&F bell ding dong elelctric 230V AC single pole complete all as specified and directed |
| 113 | Supply & fixing fancy lamp holder, insulated body ISI marked with back plate for batten fitting complete all as specified & directed |
| 114 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as speccified and directed. |
| 115 | S&F MCB DB TPN 4 way with 200 Amps 415 volts rated copper busbar in sheet steel enclosure.double door type including taking down old DB complete all as specified and directed. |
| 116 | S&F MCB DB SPN 8 way, 240 volts in sheet steel enclosure.double door type including taking down old DB complete all as specified and directed. |
| 117 | S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 118 | S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 119 | S&F MCB, TPN, AC, 415 volts of 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 120 | S& F surface mounted LED luminiare, 20 watt, 4 Feet with all accessories having aluminum extruded channel with diffuser for glare free light, high lumen output, driver PF >0.90 having over voltage protection upto 400 volts and lumen efficiency >120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose complete all as specified and directed. |
| 121 | S & F LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for \\"B-22 type to fix on batten holder complete all as specified and directed. |
| 122 | Supply and fix LED building security light 1 x 20 W housing made out of pressure die-cast aluminium alloy with toughned glass, working on 240 volts, 50 Hz, consisting of reflecting lamps wired with appropriate driver including fixed on wall with 1.2 mtr 32 mm GI pipe bracket & 02 Nos MS clamp made out of F1 40 x 6 mm or as directed including connecting with 1.5 sqmm , 3 core, PVC insulated copper conductor cable 1100 Volt grade from ceiling box to light complete all as specified and as directed by Eng-in-Charge. |
| 123 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4mm GI Wire check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 124 | S&F Exhaust fan made of steel body ,AC single phase 230/240 Volt ,50HZ, Copper winding of size 300 mm sweep with blades, frame and louvers complete all as specified and directed. Note:- Old Exhaust fan deposit at MES Store Yard. |
| 125 | S&F Exhaust fan made of made of sturdy Engineering plastic body, AC single phase 230/240 Volt ,50HZ, Copper winding of size 300 mm sweep with blades, frame and louvers complete all as specified and directed. Note:- Old Exhaust fan deposit at MES Store Yard. |
| 126 | Supply and installation of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith heating element with anticorrosive magnesium anode, NRV, thermostat, indicator and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with G.I. hexagonal adapters/ nuts on both side for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed.Note:- Old Geyser deposit at MES Store Yard. |
| 127 | Taking down carefully Copper/ aluminium sub main wiring complete, including fixture such as conduit etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed. |
| 128 | S&F sub main wiring two single core 6 Sqmm PVC insulated, unsheathed, stranded copper conductor cable(FRLSH) 1100Volts grade drawn in & including rigid PVC Conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sqmm PVC insualted unsheathed copper conductor cable (FRLSH) as earth wire and wire connected with main earth dolly including cutting chases and making good disturbed portion complete all as specified and directed. Note : Two runs of phase, neutral wire and one run of earth wire and PVC conduit will be measured as one RM or one length. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender