Tender For Providing Of 01X Single Officers Accn Near Offrs Mess Of 17 , (Job No.81 Sa/Btd/Lbw-29/2025-26) Under Ge South At Bathinda Mil Stn
Tender Value
29.46 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
34 days left
EMD
59000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 01X Single Officers Accn Near Offrs Mess Of 17 , (Job No.81 Sa/Btd/Lbw-29/2025-26) Under Ge South At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Note:-Please refer schedule 'A' notes before quoting the tender. |
| 2 | GENERAL SUMMARY |
| 3 | Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately) |
| 4 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately) |
| 5 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately) |
| 6 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately) |
| 7 | Lump sum price worked out by the contractor for ROAD ,PATH , HARDSTANDING AND CULVERT WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately) |
| 8 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately) |
| 9 | Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-VII (Ref prepriced schedule attached seperately) |
| 10 | SCH 'A' Pt -VIII (MISCELLANEOUS ITEMS) (Contains Ser item No 3.01 to Ser item No 6.03) |
| 11 | INTERNAL WATER SUPPLY NOTE:- For items of internal Water Supply notes given at the beginning of Sch ‘A’ Part-III (internal Water Supply) shall also be applicable. |
| 12 | Supply and fixing Chromium plated fancy type Soap tray complete all as specified and as directed by Engineer-in- charge. |
| 13 | Supply and fixing Health Faucet Chromium plated with 1.00 m long CP flexible pipe and hook fixed complete all as specified and as directed by Engineer-in- charge. |
| 14 | Supply and Fixing 15 mm bore chromium plated two way bib taps, long body, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed by Engineer-in- charge |
| 15 | INTERNAL ELETRIFICATION NOTE:- For items of internal Electrifications notes given at the beginning of Sch ‘A’ Part-III (internal Electrification) shall also be applicable. |
| 16 | Supply and fixing wall mounted extrdued aluminium housing LED betten fixture with tube 1.2 m, 20 watt Inverter type, 1.2 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete including making connection complete all as specified and as directed by Engineer-in- charge. |
| 17 | Supply and fixing wall mounted extrdued aluminium housing LED betten fixture with tube 0.6 m, 10 watt Inverter type, 0.6 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete including making connection complete all as specified and as directed by Engineer-in- charge. |
| 18 | Supply and Fixing LED 12 W Base B-22 complete all as specified and as directed by Engineer-in- charge |
| 19 | SEWAGE DISPOSAL WORKS NOTE:- For items of SEWAGE DISPOSAL WORKS notes given at the beginning of Sch ‘A’ Part-VIII ( SEWAGE DISPOSAL WORKS ) shall also be applicable. |
| 20 | Material and labour for 10 users 2000 ltrs capacity PVC moulded Anaerobic Septic Tank for an anaerobic design in which bacteria treats waste under most favourable conditions, process effectively prevents rapid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet- outlet short circuit of waste water which is prevented to ensure long and enough retention time for effective treatment, thus the effluent dose not contain any solid or scum that could clog up the pipe line.The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the bottom of the septic tank (known as sludge). The liquid wastes are also held in the septic tank while bacteria break down solids into liquids in an anaerobic environment, process is known as primary treatment certain bacterias and viruses are adsorbed into solid particles and held in the sludge or scum layers, allowing for limited removal of disease causing organisms at the stage. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided and tank is ready to use including 150mm thick PCC 1:4:8 Type B-1, using 20mm graded stone aggregates below foundation and vent shaft connection, including excavation, returning and filling, removal of excess soil, connection to existing sewage line including site clearance etc.complete all as specified and directed by Engineer-in- charge. |
| 21 | Supply , Fixing and testing for providing ,lowering , laying HDPE DWCPE (SN 8) pipe of 150mm internal bore as per IS-16098 of 2013, laid in trench and jointed with and including elastomeric sealing 'O' ring and fittings complete all as per manufacturer's instructions , including demolition of existing line complete all as speified and as directed by Engineer-in-charge. |
| 22 | Supply and Fixing PFRC (Polymer Fibre Reinforced Concrete) Cover not exceeding area 0.6 Sqm having load carrying capacity 20 ton, Fixed in cement Concrete (1:2:4) etc complete all as speified and as directed by Engineer-in-charge. |
| 23 | EXTERNAL WATER SUPPLY NOTE:- For items of EXTERNAL WATER SUPPLY notes given at the beginning of Sch ‘A’ Part-IV ( EXTERNAL WATER SUPPLY ) shall also be applicable. |
| 24 | Supply and fixing Gun metal gate valve with locking device and open shut indictor for 25 mm bore ion pipe, with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed |
| 25 | Supply and fixing Gun metal gate valve with locking device and open shut indictor for 20 mm bore ion pipe, with iron wheel head, screwed both ends conforming to IS 778 - 1984 complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 34 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 37 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender