Tender For cement concrete Repair Near Laxmi Narayan Temple In Ward 42 Numaish Camp, Cc, Drain, Tiles Repair Work In Anita Tyagi Wali Gali Near Hanuman Temple In Setia Vihar, Off Block, I Block, Shakti Nagar, Sant Nagar Etc.
Tender Value
9.96 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
17 days left
EMD
99638
Bank guarantee accepted
Document Fee
826
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for cement concrete Repair Near Laxmi Narayan Temple In Ward 42 Numaish Camp, Cc, Drain, Tiles Repair Work In Anita Tyagi Wali Gali Near Hanuman Temple In Setia Vihar, Off Block, I Block, Shakti Nagar, Sant Nagar Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200) feet) SOR 694 |
| 2 | Dismantling Brick Work or stone work in lime or cement mortar and including stacking of materials as Directed by the Engineer in-charge with in a distance of 60 meter(200feet) |
| 3 | Deduction (a) Old Bricks |
| 4 | (b) Brick bats |
| 5 | Dismantling of old CC or Brick or granolithic floors including base concrete and including stacking of dismantled material as directed by the Engineer -in-charge with in a distance of 60 |
| 6 | Desalting and excavation of Nala with removal and disposal of surplus earth mooram shingle pollithine kankar etc requiring the use of special tools and plants such as JCB, Pock land etc with labour complete in all respect at site. (S.1.-251A) |
| 7 | Disposal of Excavated Soil up to 5.00 KM distance complete with labour T&P ETC at site. (SOR UP PWD SI-131(A) |
| 8 | Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & |
| 9 | M-150 class brick work in 1:4 cement and four fine sand of 1.25 F.M mortar in all complete(S.I. No. |
| 10 | 12 mm thick cement plaster 1:4 in work complete. |
| 11 | R.C.C Work with Cemant approved coarse sand and 2 cm Gauge approved stone grit in coarse sand and cemant in Proportion of 1:15:3 in lintels of door and window excluding supply of reniforcement and its bending but including its fixing and binding the same 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc slabs in 1:1.5:3 (S.I.No. 284A) |
| 12 | M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorized overlapping shall be measured and including cost of binding wire. |
| 13 | M.S. or Iron work of small size and section such as holding dwon bolts, hold fast tie rods grating etc wrought to etc. and their fixing required for completion of the work M.S Grills/Stair case railling/ gates/ trusher/ racks etc. SI NO 502 A |
| 14 | Plain Cement Concrete with 2cm gauge approved slone balliast, coarse sand & cement in the proportion of 4:2.1 including supply of all materials, labour, Tools & plants etc. Suresh se Vijay Potla |
| 15 | Supply of 80mm thick Precast cement concerete I-Shape Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement, smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa and weight 4.5kg per including cost of material, with a blanket layer of 4,00cm. thick fine sand, including labour, T& Petc required for proper completion of the work as directed by Engineer-in-charge. (SOR UP NEW 786 Item No-14) |
| 16 | Laying of 80mm thick Precast cement concerete I-Shape Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement, smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa and weight 4.5kg per including cost of material, with a blanket layer of 4.00cm. thick fine sand. including labour, T & Pete required for proper completion of the work as directed by Engineer-in-charge. (SOR UP NEW 786 Item No-14) |
| 17 | Cement Concrete with 2cm gauge approved stone grit, coarse sand & cement in proportion of 1:1.50:3 in ce pavement (theckness as per design) cement coarse & fine aggregate confirming to IS standard mixed in ncrete mixture /Plant of not less then 0.2 cum capacity & appropriate weight batcher using approved mix design, laid in approved fixed form work 17 (steel) channel) laying and fixing of 125 micron thick |
| 18 | Add 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender