Tender For Work Related To The Strengthening And Systematic Organization Of The Electrical Infrastructure For The Ground Floor, Upper Basement Commercial Area, Various Control Rooms, And Corridors Of Indira Bhawan.
Tender Value
1.43 Crore
Estimated cost
Bid Submission
26 Nov 2026
13 days left
EMD
2.86 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Related To The Strengthening And Systematic Organization Of The Electrical Infrastructure For The Ground Floor, Upper Basement Commercial Area, Various Control Rooms, And Corridors Of Indira Bhawan.
BOQ
| Sl. No. | Item Description |
| 1 | S/L of 1100 V XLPE Insulated armoured served sheathed 400 Sqmm 3.5 Core LT Cable at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on side and top, on surface shall be fixed with clamps complete as direction of E/I. SOR18/501 |
| 2 | S/L of 1100 V XLPE Insulated armoured served sheathed 120 Sqmm 3.5 Core LT Cable at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on side and top, on surface shall be fixed with clamps complete as direction of E/I. SOR18/501 |
| 3 | S/L of 1100 V XLPE Insulated armoured served sheathed 35 Sqmm 3.5 Core LT Cable at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on side and top, on surface shall be fixed with clamps complete as direction of E/I. SOR18/501 |
| 4 | S/L of 1100 V XLPE Insulated armoured served sheathed 25 Sqmm 3.5 Core LT Cable at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on side and top, on surface shall be fixed with clamps complete as direction of E/I. SOR18/501 |
| 5 | S/L of 1100 V XLPE Insulated armoured served sheathed 16 Sqmm 4 Core LT Cable at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on side and top, on surface shall be fixed with clamps complete as direction of E/I. SOR18/501 |
| 6 | S/L of 1100 V XLPE Insulated armoured served sheathed 10 Sqmm 2 Core LT Cable at a depth of 750 mm below ground level over a cusion of 75 mm thick sand all around and protected with burnt bricks on side and top, on surface shall be fixed with clamps complete as direction of E/I. SOR18/501 |
| 7 | S/F of Cable Lugs for 400 Sqmm 3.5 Core LT Cable complete as direction of E/I. SOR18/504 |
| 8 | S/F of Cable Lugs for 240 Sqmm 3.5 Core LT Cable complete as direction of E/I. SOR18/504 |
| 9 | S/F of Cable Lugs for 35 Sqmm 3.5 Core LT Cable complete as direction of E/I. SOR18/504 |
| 10 | S/F of Cable Lugs for 16 Sqmm 3.5 Core LT Cable complete as direction of E/I. SOR18/504 |
| 11 | S/F of Cable Lugs for 10 Sqmm 3.5 Core LT Cable complete as direction of E/I. SOR18/504 |
| 12 | Deduct in Item No 501 (I to t), and 506 when cables is passed through GI /MS /Hume pipe/Duct, the cost of Pipe is to be extra when and where required.SOR18/507 |
| 13 | Removal of Old Cables/Wires with cartage Loading unloading with making proper coiling & deposite to Store as direction of PDA/UPPCL complete. Based SOR 501 (185/2) |
| 14 | Removal & Relaying of 150-400 Sqmm Old Cables with proper dressing clamping & making connections complete Rate Based SOR 501 (215+107) |
| 15 | Removal & Refixing of 1 to 3 Phase KWH Multifunctional electronic energy 10-60 Amp Capacity Meter fixed in integral box complete.Rate Based SOR 1209 (134/2) |
| 16 | S/L of 32x6mm GI Strip with 150 mm long GI Bolts and nuts complete in all respect.SOR 18/ 719 |
| 17 | S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt . Rate SOR-18/701 |
| 18 | RCC work with cement approved coarse sand and 2 Cm gauge approved stone grit in the proportion 1:1.5:3 in slab and RCC wall including all material, labour T&P etc complete Rate SOR-22/ S.N. 284 |
| 19 | 12 mm thick cement plaster in 1:4 Cement and fine sand mortar in single coat on fair side of single or half brick wall for interior plastreing including all material, labour T&P etc complete Rate SOR-22/ S.N. 597(c) |
| 20 | MS or Iron work for MS grill for railing including supply including all material, labour T&P etc SOR-22/ S.N. 502a |
| 21 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts& nuts, etc. as required. 225 mm width x 50 mm depth x 1.6 mm thickness as DSR 22/4.6.3 |
| 22 | 450 mm width x 62.5 mm depth x 2.0 mm thickness as DSR 22/4.6.10 |
| 23 | 600 mm width x 62.5 mm depth x 2.0 mm thickness as DSR 22/4.6.11 |
| 24 | 900 mm width x 75 mm depth x 2.0 mm thickness as DSR 22/4.6.16 |
| 25 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray ''bends'' (Galvanisation thickness not less than 50 microns) with perforation in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts& nuts, etc. as required. 225 mm width x 50 mm depth x 1.6 mm thickness as DSR 22/4.7.3 |
| 26 | 450 mm width x 62.5 mm depth x 2.0 mm thickness as DSR 22/4.7.10 |
| 27 | 600 mm width x 62.5 mm depth x 2.0 mm thickness as DSR 22/4.7.11 |
| 28 | 900 mm width x 75 mm depth x 2.0 mm thickness as DSR 22/4.7.16 |
| 29 | S/L of 90 mm DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend couplers etc. conforming to IS 14930, Part II with fitting and cutting. Jointing, Clamping, fastners nuts & bolts as required etc, Rate PSR in PDA |
| 30 | Removal and Refixing of service Connections complete as required etc, Rate PSR in PDA |
| 31 | \\"Supplying, installation, testing and commissioning of floor-mounted, compartmentalized, cubicle-type LT Distribution / 32-Meter Panel (Panel No. 1, Basement - Infront Tailor), fabricated from heavy-duty CRCA sheet steel (not less than 14/16 SWG), dust and vermin proof, finished with epoxy powder coating over a rust-neutralizing primer, complete with structural base channel, removable gland plates, lifting lugs, earthing studs, and danger notice plate. The panel comprises high-conductivity electrolytic grade Aluminium bus bars, cable alleys, and necessary cut-outs/compartments for switchgear and metering as per drawing and specification (i). Overall Dimensions: 6000 mm (Length) \times 2325 mm (Height) \times 800 mm (Depth). (ii). Bus Bar System: High conductivity Aluminium Bus Bar of 1000A TPN capacity with color-coded heat-shrinkable PVC sleeves, including neutral and earth bus bars running through the length. (iii).Incomer & Equipment: 1 No. Air Circuit Breaker (ACB) 1000A Four Pole (FP) / TPN with microprocessor-based release. 1000A TPN compartments and bus bar chambers. Metering & Outgoing Section: Provision for 32 Nos. Energy Meters with associated Current Transformers (CTs), selector switches, control fuses, indicating lamps, and proper internal copper control wiring. Cable Alley:Dedicated vertical cable alleys for neat wire/cable dressing and management.\\" |
| 32 | ”Supplying, installation, testing and commissioning of floor-mounted, compartmentalized, cubicle-type Phase Changer / LT Panel (Panel No. 8, 7th & 8th Floor & Lift Main Incoming COS), fabricated from heavy-duty CRCA sheet steel, dust and vermin proof, finished with epoxy powder coating over a rust-neutralizing primer, complete with structural base channel, removable gland plates, lifting lugs, earthing studs, and danger notice plate. The panel comprises high-conductivity electrolytic grade Aluminium bus bars, cable alleys, and necessary cut-outs/compartments for switchgear and changeover systems as per drawing and specifications: Overall Dimensions: 2100 mm (Length) \times 1575 mm (Height) \times 800 mm (Depth). Bus Bar System: High conductivity Aluminium Bus Bar of adequate capacity with color-coded heat-shrinkable PVC sleeves, including neutral and earth bus bars running through the length. Switchgear & Equipment: Compartmentalized cubicles featuring Automatic Transfer Switches / Changeover Switches (such as ATS 800A units) for power management between floors and lift main supplies. Indication & Control Section: Equipped with phase indication lamps, control fuses, and proper internal control wiring.Cable Alley:Dedicated vertical/horizontal cable management and termination arrangements.” |
| 33 | “Supplying, installation, testing and commissioning of floor-mounted, compartmentalized, cubicle-type LT Distribution / 23-Meter Panel , fabricated from heavy-duty CRCA sheet steel, dust and vermin proof, finished with epoxy powder coating over a rust-neutralizing primer, complete with structural base channel, removable gland plates, lifting lugs, earthing studs, and danger notice plate. The panel comprises high-conductivity electrolytic grade Aluminium bus bars, cable alleys, and necessary cut-outs/compartments for switchgear and metering as per drawing and specifications: Overall Dimensions: 4600 mm (Length) 2325 mm (Height) ,800 mm (Depth). Bus Bar System: High conductivity Aluminium Bus Bar of 800A TPN capacity with color-coded heat-shrinkable PVC sleeves, including neutral and earth bus bars running through the length. Incomer & Equipment: 1 No. Air Circuit Breaker (ACB) 800A FP MDO (Draw-out type). 800A TPN compartments and bus bar chambers. Metering & Outgoing Section: Provision for 23 Nos. Energy Meters with associated Current Transformers (CTs), selector switches, control fuses, indicating lamps, and proper internal copper control wiring. Cable Alley: Dedicated vertical cable alleys for neat wire/cable dressing and management.” |
| 34 | “Supplying, installation, testing and commissioning of floor-mounted, compartmentalized, cubicle-type LT Distribution / 8-Meter Panel (Panel No. 7, Indrabhawan Offices), fabricated from heavy-duty CRCA sheet steel, dust and vermin proof, finished with epoxy powder coating over a rust-neutralizing primer, complete with structural base channel, removable gland plates, lifting lugs, earthing studs, and danger notice plate. The panel comprises high-conductivity electrolytic grade Aluminium bus bars, cable alleys, and necessary cut-outs/compartments for switchgear and metering as per drawing and specifications: Overall Dimensions:6300 mm (Length) $\times$ 2075 mm (Height) $\times$ 700 mm (Depth). Bus Bar System: High conductivity Aluminium Bus Bar of adequate capacity with color-coded heat-shrinkable PVC sleeves, including neutral and earth bus bars running through the length. Incomer & Switchgear Equipment: Compartmentalized cubicles featuring Air Circuit Breakers (ACBs) such as ACB 400A / 630A FP MDO (Draw-out type) for respective incoming/outgoing circuits. Metering & Outgoing Section: Provision for 8 Nos. Energy Meters (dedicated for various floors/offices such as 1st Floor – Self Tax, 2nd Floor – Self Tax, 4th Floor – LIC, 5th Floor – Indian Oil, 4th Floor – Treasury, 7th Floor – Water/Photocopy, 7th Floor – Self/Others, 7th Floor – Deep Frozen/Insurance) with associated Current Transformers (CTs), selector switches, control fuses, indicating lamps, and proper internal copper control wiring. Cable Alley: Dedicated vertical cable alleys for neat wire/cable dressing and management.” |
| 35 | ”Supplying, installation, testing and commissioning of wall-mounted / floor-mounted, cubicle-type Busbar Panel / Chamber, fabricated from heavy-duty CRCA sheet steel (not less than 14/16 SWG), dust and vermin proof, finished with epoxy powder coating over a rust-neutralizing primer, complete with removable gland plates, lifting lugs, earthing studs, and danger notice plate. The panel is equipped with high-conductivity electrolytic grade Aluminium bus bars of minimum 800A TPN capacity with color-coded heat-shrinkable PVC sleeves, neutral bar, earth bar, and internal cut-outs/terminals as per specifications: Overall Dimensions:1200mm Length 900mmHeight 450/ 600mmDepth. Bus Bar System: High conductivity Aluminium Bus Bar of 800A TPN capacity with adequate clearance and support insulators. Enclosure & Hardware:Fully compartmentalized or open-chamber design with hinged lockable doors, double earthing terminals, and cable entry knockouts/gland plates.” Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender