Tender For Construction Of Pre-Fabricated Hut At Pachgam Nard Kund
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
19 days left
EMD
19980
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pre-Fabricated Hut At Pachgam Nard Kund
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres. All kinds of soil |
| 2 | P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl all carriage complete job. |
| 3 | P/L in position cement concrete of specified grade excluding the cost of centering & shuttering All work up to plinth level in 1:4:8 (1cement: 4 coarse sand: 8 graded stone aggregate of 40 mm Nominal size (Crushed) all inclusive leads, lifts, loading, un-loading, cost excluding carriage of material involved complete. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level, excluding cost and carriage of materials from approved nearest sources to site of work complete. |
| 5 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 stone aggregate 20 mm nominal size) excluding cost of carriage complete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 8 | Foundations, footings, bases for columns |
| 9 | Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Providing & laying stone RBM below foundation & rooms including watering ramming complete job |
| 11 | Brick work with FPS bricks of class designation 7.5 in superstructure including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including carriage of Bricks |
| 12 | Providing and fixing of wall panel 50 mm thick puff panel and width of 1 m or more insulated thick panel with 0.50mm PPGI sheet both sides 40+20kg density.with all fixtures complete job |
| 13 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 18 guage section |
| 14 | Providing and fixing of Aluminium composite panesl 4 mm in partition walls, door windows etc including P/F snap beading and EPDM rubber Gasket complete job. |
| 15 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 16 | Providing and fixing 10mm thick prelaminated ply with 1 side decorative and other side with matching shade with necessary screws and fixed on wooden /steel framework in ceiling framework to be paid separately Complete job. |
| 17 | 12mm Cement plaster finished with a floating coat of neat cement of mix (1 cement : 4 fine sand) |
| 18 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer/c eves boarding and soffit |
| 19 | Providing HI-Rib sheet roofing fixed with polymer coated J or L hooks bolts & nuts 8mm dia with bitumen & GI limpet washers upto( a pitch of 60 degree) excld cost of perlins, rafters & tresses 0.50mm thick with zinc coating not less than 275g/sqm including ridges and valleys |
| 20 | Providing and laying of precast cement concrete rings of dia 3feets in soakage pit including cost of trenching and refilling pre cast refilling cement concrete cap. |
| 21 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate. |
| 22 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to Is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 24 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all Granite of any colour or shade Area of slab over 0.5 sqm 16-18 mm |
| 25 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Workl |
| 26 | Hardware items |
| 27 | Providing and fixing of Hardware fittings (Alloys) as per approved samples Aluminium Annodised |
| 28 | 100 mm Handle |
| 29 | 125 mm Handle |
| 30 | 100mm Tower Bolts |
| 31 | 150mm Tower Bolts - |
| 32 | L-drops with Link Lock set - |
| 33 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. |
| 34 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 35 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
| 37 | 20 mm dia. nominal bore |
| 38 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 39 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 40 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510mm bowl depth 200mm |
| 41 | Providing & fixing of bib cock of standard make and quality (Jaquar or other Equivalent make) |
| 42 | Providing & fixing of angle valve single way of standard make and quality (Jaquar or other Equivalent make) |
| 43 | Providing & fixing of wall mixer of standard make and quality (Jaquar or other Equivalent make |
| 44 | Providing & fixing of basin mixer of standard make and quality (Jaquar or other Equivalent make) |
| 45 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 46 | Providing & fixing of towel rod 600mm long of standard make and quality |
| 47 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 48 | Providing & fixing of floor trap with iron gratting |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings |
| 50 | Providing & fixing of soap dish with holder |
| 51 | Providing & fixing of waste pipe of standard quality and make including necessary fixtures B type ( Prince or any other equivalent make) |
| 52 | 100 mm dia |
| 53 | 75 mm |
| 54 | Providing and fixing of havelles made wiring/electric appliances for electrification of library with conduits using 1.5mm havells wire for lightning/2mm for fan points and 2.5mm for heating points (complete job) |
| 55 | Heating points |
| 56 | Lightning Points |
| 57 | Charging Points |
| 58 | Carriage of material by mechanical transport |
| 59 | Sand/Stone Aggregate avg. lead of 25KM Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender