Bids Are invited for Special Reapir Of Ber Furniture For The Qe Dec 2024 Under Ge Haddo

Sharing tender

Bids Are invited for Almirah Large Steel With Shelves - Almirah Large Steel With Shelves. 1Mm Thick Ms Sheet Shall Be Used To Manufacture Almirah Except Legs. Two Legs Shall Be Provided To Almirah As Shown On Drawing And Shall Be Of 1.25 Mm Thick Ms Sheet. Cromium Plated Stainless Steel Godrej Type Handle100mm Long Shall Be Fixed On Shutters, Almirah Shall Be Fitted With Isi Marked 75Mm 6 Lever Lock With Three Way Locking System. Front Shutters Shall Have Two Leaves Of Equal Size. Almirah Shall Be Finished With (Shade Of Ta Grey Colour Or As Approved Ge Both Internaly And Externaly) Two Coats Of Synthetic Enamel Paint Upto Obtaining Glossy Finishing Over A Coat Of Redoxide Primer With Spray Gun After Properly Smoothening The Surface With Sand Paper. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd-1031 , Almirah Small Steel With Shelves - Almirah Small Steel With Shelves. 1Mm Thick Ms Sheet Shall Be Used To Manufacture Almirah Except Legs. Two Legs Shall Be Provided To Almirah As Shown On Drawing And Shall Be Of 1.25 Mm Thick Ms Sheet. Cromium Plated Stainless Steel Godrej Type Handle100mm Long Shall Be Fixed On Shutters, Almirah Shall Be Fitted With Isi Marked 75Mm 6 Lever Lock With Three Way Locking System. Front Shutters Shall Have Two Leaves Of Equal Size. Almirah Shall Be Finished With (Shade Of Ta Gray Colour Or As Approved Ge Both Internaly And Externaly) Two Coats Of Synthetic Enamel Paint Upto Obtaining Glossy Finishing Over A Coat Of Redoxide Primer With Spray Gun After Properly Smoothening The Surface With Sand Paper. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge. Drg No Fd-1032 , Chair Computer - Chair Computer. As Per Trade Pattern And Directed By Enginer-In-Charge .Drg No Tp , Chair Visitor Cushioned With Arms - Chair Visitor Cushioned With Arms. As Per Trade Patern And Directed By Enginer-In-Charge. , Chair Easy With Cushion - Chair Easy With Cushion. All Wood Shall Seasoned First Class Teak Wood Free From Knots And Defects Hard Nylon Buffers Shall Be Fixed At The Bottom Of Legs With Brass Screws Seat & Back Shall Be Made By 12Mm Thick Bwr Grade Plywood Over Which 40 Density Foam 75Mm Thick Shall Be Provided Duly Covered With Best Quality Tapestry Cloth As Approved By Ge. All Exposed Wooden Surface Shall Be Finished With French Polish In Light Walnut Shade Or As Approved By Ge. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd-358 , Chair Revolving Executive - Chair Revolving Executive As Per Trade Pattern And Directed By Enginer-In-Charge. , Chair Plastic Moulded With Arms And With Cushion - Chair Plastic Moulded With Arms And With Cushion (Ornate). As Per Trade Pattern And Directed By Enginer-In-Charge. , Chair Dining Jcos Oblique Ors - Chair Dining Jcos/Ors. All Wood Shall Seasoned First Class Teak Wood Free From Knots And Defects.Hard Nylon Buffers Shall Be Fixed At The Bottom Of Legs With Brass Screws. Readymade Pvc Seat 4 Mm Thick With Holes Shall Be Screwed With Rails After Providing One Additional Support Of 25 X 25 Mm Stiffner Between And Parallel To Front And Back Rail,Rest On Side Rail. All Wooden Surface Shall Be French Polished With Glossy Finish, Shade As Approved By Ge. Rest All As Specified/ Shown In Drawing And Directed By Engineer In Charge.Drg No Fd/Map-Ii/05 , Chair Writing. - Chair Writing. The Frame Of The Chair Shall Be Of 16 Gauge 25Mm Dia Ms Tubular Frame Powder Coated. Back Shall Be Designed With Contoured Lumber Support For Extra Comfort. 12Mm Thick Hot Pressed Plywood Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lippling Alround Shall Be Provided At Seat And Back. Arm Rest Shall Be Of Black Integral Skin Poly Urethane With Shore A Hardness And Reinforced With Ms Insert. It Shall Be Scratch And Wheather Resistant. Both Hand Rest Section Shall Have Inner And Outer Dia Of 210Mm And 230Mm Respectively And Have Slope Towards Front. Rest All As Specified / Shown In Drawing And Directed By Engineer-In-Charge.Drg No Fd/E6/Map/12 , Charpoy Ip With Hard Top - Charpoy Ip With Hard Top. Long And Short Rails Of Bed Shall Be 65 X 25 Mm 16 Gauge Rectangle Ms Pipe.Stifners Shall Be 25 Mm 16 Gauge Square Ms Pipe. Legs Shall Be 32 Mm 16 Gauge Square Ms Pipe And Welded Properly At Joints To Make The Charpoy. 25 X 60 X 6 Mm Cleats Be Welded With Short Rails Inner Side To Support The Plywood. 12 Mm Thick Ply Wood Bwr Type Unpolished Shall Be Provided To The Top Of Charpoy Screwed With Cleat And Stiffners By Nut & Washers. All Steel Members Shall Be Finshed With Two Coats Of Synthetic Enamel Paint Upto Obtaining Glossy Finishing Over A Coat Of Redoxide Primer With Spray Gun After Properly Smoothening The Surface With Sand Paper In Black Colour. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd/Map-Ii/01 , Chair 3 Seater With Arm And Back - Chair 3 Seater With Arm And Back. As Per Trade Pattern And Directed By Engineer In Charge , Locker Bed Side Steel. - Locker Bed Side Steel. 1Mm Thick Ms Sheet Shall Be Used To Manufacture Locker Except Legs. Two Legs Shall Be Provided To Almirah As Shown On Drawing And Shall Be Of 1.25 Mm Thick Ms Sheet. Cromium Plated Stainless Steel Godrej Type Handle100mm Long Shall Be Fixed On Shutters, Locker Shall Be Fitted With Isi Marked 75Mm 6 Lever Lock With Three Way Locking System (Make Of Lock -Harrison/Link/Godrej). Front Shutters Shall Have Two Leaves Of Equal Size. Locker Shall Be Finished With (Shade Of Ta Gray Colour Or As Approved Ge Both Internaly And Externaly) Two Coats Of Synthetic Enamel Paint Upto Obtaining Glossy Finishing Over A Coat Of Redoxide Primer With Spray Gun After Properly Smoothening The Surface With Sand Paper. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd-1029 , Sofa Set 4 Seater. - Sofa Set 4 Seater. The Set Consist Of One Long Piece Of Two Seater And Two Small Pieces Of Single Seater. All Timber Work Shall Be First Class Seasoned Teak Wood Free From Knots/Defects. Cushion For Seat And Back Shall Be Of 100Mm Thick 40 Density Duly Covered With Fabric/Tapestry Cloth Composition Of 65% Polyester & 35% Cotton Or As Approved By Ge And Make Of Cushion Shall Be Kurlon/Sleepwell. All The Wooden Joints Shall Be Fixed With Bamboo Pins And Nails Shall Not Be Used. All Exposed Wooden Surface Shall Be Finished With Deco Polish In Light Walnut Shade Or As Approved By Ge. Rest All As Specified/ Shown In Drawing And Directed By Engineer-In-Charge.Drg No Fd-281 , Sofa Set 5 Seater. - Sofa Set 5 Seater. The Set Consist Of One Long Piece Of Three Seater And Two Small Pieces Of Single Seater. As Per Trade Pattern. , Conference Table 14 Person - Conference Table 14 Person. As Per Trade Pattern Eco Moudler Of Godrej.Drg No Tp , Table Office Clk Steel. - Table Office Clk Steel. Top Shall Be 18 Mm Thick Exterior Grade Pre Laminated Mdf Board One Side Laminated In Light Wallnut Shade Or As Approved By Bso/Ge, Duly Covered With 4 Mm Thick Half Round Teak Wood Beading In Matching Shade With Synthetic Adhesive(Fevicol Sh). With Two Coats Of Synthetic Enamel Paint Upto Obtaining Glossy Finishing Over A Coat Of Redoxide Primer With Spray Gun After Properly Smoothening The Surface With Sand Paper In Black Colour. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd-1004 , Table Dining 6 Pers. - Table Dining 6 Pers. All Wooden Part Shall Be First Class Seasoned Teak Wood Free From Knots And Defects. Hard Rubber/Nylon Buffers Shall Be Fixed At The Bottom Of Legs With Brass Screws, Top Shall Be 18Mm Thick Exterior Grade Mdf Board One Side Laminated Shade As Approved By Ge, Duly Fixed With 4Mm Thick Teak Wood Beading In Matching Shade With Synthetic Adhesive (Fevicol Sh) 8 Nos Of L-Shape Corner Of Flat Iron 5Mm Thick 4 X 4 Inch Between Legs And Rail To Be Fixed With Screw. All Wooden Surface Shall Be French Polished With Glossy Finish Shade As Approved By Ge Rest. All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge. Drg No Fd/Map-Ii/03 , Table Dining 4 Pers. - Table Dining 4 Pers. All Wooden Part Shall Be First Class Seasoned Teak Wood Free From Knots And Defects. Hard Rubber/Nylon Buffers Shall Be Fixed At The Bottom Of Legs With Brass Screws, Top Shall Be 18Mm Thick Exterior Grade Mdf Board One Side Laminated Shade As Approved By Ge, Duly Fixed With 4Mm Thick Teak Wood Beading In Matching Shade With Synthetic Adhesive (Fevicol Sh) 8 Nos Of L-Shape Corner Of Flat Iron 5Mm Thick 4 X 4 Inch Between Legs And Rail To Be Fixed With Screw. All Wooden Surface Shall Be French Polished With Glossy Finish Shade As Approved By Ge Rest. All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd/Map-Ii/03 , Peg Table - Peg Table. All Wood Shall Seasoned First Class Teak Wood Free From Knots And Defects. Hard Nylon Buffers Shall Be Fixed At The Bottom Of Legs With Brass Screws. H Type Leg Stiffeners Shall Be Provided For Better Support. Top Shall Be 18 Mm Thick Exterior Grade Mdf Board One Side Laminated In Light Wallnut Shade Or As Approved By Ge, Duly Covered With 4 Mm Thick Teak Wood Beading In Matching Shade With Synthetic Adhesive(Fevicol Sh). All Wood Surfaces Shall Be French Polished With High Glossy Finish. Rest All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd-384 , Table Writing. - Table Writing. All Wood Shall Be Of Seasoned 1St Class Hardwood Teakwood. Legs Shall Be Of 35Mmx55mm In Section And 717Mm High Having 5Mmx5mm In Section Groove At The Top Of Legs At The Portion When Placed In Position. Top Of Tables Shall Be Of 18Mm Thick Pre-Laminated Mdf Board With 4Mm Teak Wood Edging All Round The Top Of Table. Two Short Stiffeners Of Teakwood Of Size 50Mmx40mm In Section Irrespective Of What Is Shown On Drg Shall Be Provided Between Legs At 100Mm From Bottom Of Legs. Sides Of The Box Which House The Drawers And Cabinet Shall Be 18Mm Thick Pre-Laminated Particle Board Exterior Grade. Sides And Back Of Drawers Shall Be Of 12Mm Thick Teak Wood Planks. Bottom Of Drawers Shall Be Of 6Mm Thick Plywood Commercial 6Mm Thick Plywood Commercial 75Mm High Partition Shall Be Provided In The Drawer. Shutter For Cabinet Shall Be Fixed With Piano Type Continuous Hinges. Lock Shall Be Provided To Drawer And Shutters. Recessed Handle Shall Be Provided To Drawer And Shutter 25Mm Dia And 25Mm High Rubber Shoes Shall Be Fixed To Bottom Of Legs. Rest. All As Specified/ Shown In Drawing And Directed By Enginer-In-Charge.Drg No Fd-275 , Teapoy - Teapoy. The Leg Shall Be 60Mm X 30Mm In Section And 497 Mm High And Shall Be Of Teak Wood 5Mm X 5Mm In Section Groove Shall Be Provided At The Visible Portion Of The Top Of Legs. Top Rail Of Teak Wood Of 20Mm X 50Mm In Section And 510Mm Long Shall Be Provided Between The Legs Bottom Rail Of Teak Wood Of 20Mm X 50Mm In Section And 420Mm Long Shall Be Provided Between Legs, Widthwise At 100Mm Above The Bottom Of Legs. A Centre Rail Of Size 20Mm X 50Mm Shal Also Be Provided Lengthwise At Centre In Between The Side Bottom Rails Irrespective Of What Is Shown On Drg 25Mm Thick And 25Mm Dia Hard Rubber Pvc Rings Shall Be Fixed To The Bottom Of All Legs Fixed With 30 Mm Long Screws. Top Of The Table Shall Be Of 18Mm Thick Pre Laminated Mdf Boar Exterior Grade Of Approved Shade With 4Mm Thick Teak Wood Beading All Round The Edges Of Top. Rest All As Specified/ Shown In Drawing And Directed By Engineer-In-Charge.Drg No Fd-382