Tender For Construction ,Repair And Maintenance Of Borwell Situated In Civil Line Zone Area
Tender Value
24.95 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
49911
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction ,Repair And Maintenance Of Borwell Situated In Civil Line Zone Area
BOQ
| Sl. No. | Item Description |
| 1 | Construction of tube-well from ground levels toaccommodate housing and assembly pipe offollowing sizes in all types of alluvium strata bypercussion/ rotary drilling method and withgravel as per IS:4097-1967 and packing as perIS:2800 (Part I -& II) 1979 as amended uptodate (the work includes the cost of gravel & itsprimary packing and packing duringdevelopment, lowering of housing & strainerassembly pipes, with supply and wrapping ofcoir-rope, wherever necessary for arresting finesand particles. The work will not include cost ofhousing pipe and strainer pipe assembly anddevelopment work, but work would becompleted after obtaining sand free water).Upto 100 Meter depth Nominal bore 200 mm dia |
| 2 | Construction of Tube-well upto 100 Meterdepth and above in all type of rocks by DTHsystem and over burden to accommodatecasing pipe of following sizes in all types ofsoils and over burden including lowering ofcasing pipes but excluding cost of casing pipesas per IS : 2800 (Part I & II) 1979specifications. The work would be completedafter obtaining sand free water. The tube wellshould have a throughout bore as per nominaldia of casing pipe:200 mm dia Nominal bore |
| 3 | Development of tube well as per ISspecification using suitable compressor to givesand free water for required yield of the gravelpacked tube well. |
| 4 | Supply of ERW M.S. black casing pipe ISImarked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work. 200 mm dia |
| 5 | Supply of strainer pipes made of ERW M.S.black pipe ISI mark of following sizes at the siteof work including required size of slotting asper IS:8110-1985 of following nominal boresizes at site of work.200 mm dia |
| 6 | Supply and fixing of tube well cover of M.S.sheet (6mm thick) with nuts and bolts completefor casing size:200 mm dia |
| 7 | Supply and fixing of M.S. clamp set of 50×6mm flat iron with nuts and bolts etc. forholding the riser pipe assembly of submersiblepump set. |
| 8 | Installation of submersible motor pump set intube-well/open well complete (labour chargesonly) including transportation of tripod, chainpulley block & any other material required forlowering purpose. |
| 9 | Providing & lowering of G.I. flange pipe B Class including rubber washer and nuts of 8mm dia complete in all respect.50 mm dia |
| 10 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and asper IS 8130 : 2013 of 1.1 kV grade . Wireshould be made from 99.90 % purity copper,stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chancesof oxidization, insulation PVC type A/C/D ,flame retardant as per IS 10810-53, betteramperage rating as per IS:3961 part 5, existingpipe / open trench / Cable tray / on surfaceincluding making connection etc. as required.For additional technical parameters of product /work refer Annexure 'A' attached with this BSR 4.0 Sq.mm 3 core flat / Round |
| 11 | Providing & Laying P.V.C. / XLPE insulated &P.V.C. sheathed Un-armoured Copper cableconfirming to IS:1554 P-I / IS :7098 P - I of 1.1KV with electrolytic grade Copper made ofcopper rods confirming to IS 613-1964, ofpurity >99.7 %, Inner / outer sheath confirmingto IS:5831 in existing RCC / Hume / Stoneware/ PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. asrequired of following size. OEM must have it'sown in house NABL accrediated Laboratory fortesting procedure as per IS:10810 Foradditional technical parameters of product /work refer Annexure 'A' attached with this BSR 6.0 Sq. mm 4 core |
| 12 | Providing and fixing gun metal non- returnvalve of approved quality (screwed end) :50 mm nominal bore Horizontal |
| 13 | SITC of Radial / mixed flow ISI marked waterand anti-corrosive liquid filled submersiblemotor pump sets suitable for 100/150mm diaborewell. The size of adopter fixed on top ofthe motor should exceed the top of coupler , forsafegaurd the coupler. The constructionmaterial of motor and pump should match IS:8034 : 2018 and IS: 9283 guideline. The radialflow pumpset should operate at 5 star energyefficiency level of BEE and mixed flow pumpset should operate at 3 star energy level ofBEE, accompained by valid BEE certificate.Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011with required accessories including makingconnection suitable for Bore well. The jobincludes labour part of lowering of riser pipeG.I./H.D.P.E. with rope, cables & pump,installation of complete fitting and accessories,jointing of electrical cables up to Starter. Alllabour for testing of submersible pumps setand supply of water to water mains, completein all respect. OEM shall have submit NABL /CPRI/ ERDA accrediated lab type testcertificate before execution. All as per preapproved by Engineer in-charge. For additionaltechnical parameters of products/ work , referAnnexure \\"A\\" attached with this BSR .150 mm diameter Submersible pump shallhave following HP Rating, phase, Head range,Discharge range respectively.150 mm diameter Submersible pump shallhave following HP Rating, phase, Head range,Discharge range respectively.7.5 HP, 3-Ø, (76 - 96)Mtr, (285-180) LPM |
| 14 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selectionas per Type-2 Cordinatiom Chart and made outfrom 1.6 mm thick powder coated CRCA sheet,enclosure comprising of over load protectionrelay, short circuit & single phasing protection,Illuminated ON / OFF push buttons, ammeter,voltmeter, indicating lamps etc. suitable forfollowing rating motors complete in all respect.All as per pre approved by Engineer in- charge.For additional technical parameters ofproducts/ work , refer Annexure \\"A\\" attachedwith this BSR .For Three phase Submersible / Mono blockpump 7.5 HP to 10.0 HP ( Star / Delta starter ) |
| 15 | Replacement of parts for submersible motors :Motor rewinding upto 10.0 HP |
| 16 | Replacement of parts for submersible motors :Rotor grinding upto 10.0HP |
| 17 | Replacement of parts for submersible motors :P-4 Top bottom bearing bush |
| 18 | Replacement of parts for submersible motors :P & replacement oil seal |
| 19 | Replacement of parts for submersible motors :P & replacement connection test |
| 20 | Replacement of parts for submersible motors :Thrust plate replacement |
| 21 | Replacement of parts for submersible motors :Thrust bearing replacement |
| 22 | Replacement of parts for submersible motors :S.S. coupling |
| 23 | Replacement of parts for submersible motors :S.S. Sleeves |
| 24 | Replacement of parts for submersible motors :Colde joint |
| 25 | Replacement of parts for submersible motors :Rotor cupling welding |
| 26 | Replacement of parts for submersible PUMPS: P & F neck rings |
| 27 | Replacement of parts for submersible PUMPS:P & F bowel bush |
| 28 | Replacement of parts for submersiblePUMPS:P & F S.S. distance |
| 29 | Replacement of parts for submersiblePUMPS:P & F S.S. Gun metal bush |
| 30 | Replacement of parts for submersiblePUMPS:P & F Impellers |
| 31 | Replacement of parts for submersiblePUMPS:P & F S.S. bottom bush |
| 32 | Replacement of parts for submersible PUMPS:P & F guide plate |
| 33 | Replacement of parts for submersible PUMPS:P & F impellers lock |
| 34 | Replacement of parts for submersiblePUMPS:Cruicle bush lower |
| 35 | Replacement of parts for submersiblePUMPS:Cruicle bush UPPER |
| 36 | Service charges for getting power connectionincluding applying for connection receivingdemand note depositing demand note amountto JVVNL demand note amount and othercharges paid to JVVNL which shall bereimbursed by JMC as per JVVNL cash receipt. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender