Power Boards / Undertakings / PSU Closing in 3 days TDR #58332825

Tender For New Connections/Lines / Increasing Capacity Works And Other Associated Works Under The Deposited Scheme In The Area Of Electricity Distribution-Sub Division Atrouli, Kachhona, & Sandila, Under Edd Sadnila

Issued by Boards / Undertakings / PSU · Hardoi, Uttar Pradesh
Tender Value
28.91 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
3 days left
EMD
28910
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for New Connections/Lines / Increasing Capacity Works And Other Associated Works Under The Deposited Scheme In The Area Of Electricity Distribution-Sub Division Atrouli, Kachhona, & Sandila, Under Edd Sadnila

BOQ

Name of Work:- New Connections/Lines / Increasing Capacity Works And Other Associated Works Under The Deposited Scheme In The Area Of Electricity Distribution-Sub Division Atrouli, Kachhona, & Sandila, Under EDD Sadnila
Sl. No. Item Description
1Supply of following material
211 KV fuse set
3LT Fuse set in SMC Box
4X-Arm holding Clamp 50x6 mm with nut and bolts for PCC Pole 8.5 mtr. long as per RESPO Norms
5X-arm holding clamp for PCC 11 Mtr. long as per RESPO Norms
6Nut, Bolts and Washer all Size as per RESPO Norms
711 KV F-Clamp 50x6mm MS Flat as per RESPO Norms
8I Hook as per RESPO Norms
9Suspension for LT Clamp
10PG clamp
11Piercing Connector
12Dead End Clamp
13LT Clamp with nut Bolts for pcc pole 8.5mtr. long as per RESPO Norms
14LT Clamp with nut Bolts for pcc pole 11mtr. long as per RESPO Norms
15Stay Clamp 50x6mm MS Flat for PCC Pole 8.5 mtr. long as per RESPO Norms
16Stay Clamp 50x6mm MS Flat for ST Pole 11 mtr. long as per RESPO Norms
17Stay Clamp 50x6mm MS Flat for PCC Pole 11 mtr. long as per RESPO Norms
18Stay Insulator as per RESPO norms.
19Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store approx 40 Km
20PCC Pole 11 Mtr Long
21PCC Pole 8.5 Mtr Long
2211 kv metering cubical unit
23CT/PT pole unit
2433 KV polymeric 'Disc Insulator
2533 KV Polymeric pin Insulater with nut
2633 KV V type X-arm MS Angle 65x65x6 mm
2733KV Dropper Channel
2833KV T-off Channel
2933KV Top Channel
3011 KV F bracket
3111 KV polymeric 'Disc fitting
3211 KV polymeric 'Disc Insulator
3311 KV Polymeric pin Insulator with nut
3411 KV V type X-arm MS Angle 65x65x6 mm
3511kv Dropper Channel
3611kv T-off Channel
3711kv Top Channel
38M.S. SS Base Angle
39G.I Wire
40MS Earthing Complete 20mm
41ACSR Dog Conductor
42ACSR Rabbit Conductor
43ACSR Waeasel
44Stay Set Complete
45Transformer 250 KVA
46Transformer 100 KVA
47Transformer 25 KVA
48Transformer 63 KVA
49I/D cable termination box 3x70/3x185/3x120 sqmm
50O/D cable termination box 3x70/3x185/3x120 sqmm
5111 KV XLPE cable 3x70/3x185/3x120 sqmm
52AB conductor 3x120
53AB conductor 3x95
54AB conductor 3x50
55AB conductor 1x16
56Erection & Stringing and Sagging of 11 KV & LT line
57Erection of PCC 8.5 mtr long Single pole with all accessories
58Erection of PCC 8.5 mtr long Double Pole with all accessories
59Erection of PCC single pole 11 mtr. Long all necessary accessories
60Erection of PCC Double pole 11 mtr. Long all necessary accessories
61Erection of 33 KV polymeric 'Disc Insulator, 33 KV Polymeric pin Insulater with nut, 33 KV V type X-arm MS Angle 65x65x6 mm, 33KV Dropper Channel, 33KV T-off Channel, 33KV Top Channel, 11 KV F bracket, 11 KV polymeric 'Disc fitting, 11 KV polymeric 'Disc Insulator, 11 KV Polymeric pin Insulator with nut, 11 KV V type X-arm MS Angle 65x65x6 mm , 11kv Dropper Channel, 11kv T-off Channel, 11kv Top Channel, M.S. SS Base Angle, G.I Wire
62Fixing of 11 KV fuse set
63Fixing of LT Fuse set in SMC Box
64Fixing of X-Arm holding Clamp 50x6 mm with nut and bolts for PCC Pole 8.5 mtr. long as per RESPO Norms
65Fixing of X-arm holding clamp for PCC 11 Mtr. long as per RESPO Norms
66Fixing of Nut, Bolts and Washer all Size as per RESPO Norms
67Fixing of 11 KV F-Clamp 50x6mm MS Flat as per RESPO Norms
68Fixing of I Hook as per RESPO Norms
69Fixing of Suspension for LT Clamp
70Fixing of PG clamp
71Fixing of Piercing Connector
72Fixing of Dead End Clamp
73Fixing of LT Clamp with nut Bolts for pcc pole 8.5mtr. long as per RESPO Norms
74Fixing of LT Clamp with nut Bolts for pcc pole 11mtr. long as per RESPO Norms
75Fixing of Stay Clamp 50x6mm MS Flat for PCC Pole 8.5 mtr. long as per RESPO Norms
76Fixing of Stay Clamp 50x6mm MS Flat for ST Pole 11 mtr. long as per RESPO Norms
77Fixing of Stay Clamp 50x6mm MS Flat for PCC Pole 11 mtr. long as per RESPO Norms
78Fixing of Stay Insulator as per RESPO norms.
79Construction of FRP type T/F plinth of size 1.5x1.5x1.5 sqm
80Construction of T/F plinth of size 1.5x1.5x1.5 m on a padding 0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimetres below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimetre. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor).
81Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs)
82Mounting of 100 KV T/F form dump place to newly constructed Double pole/Plinth & its commissioning including jumepring with all system ((All the required material for above job shall be provided by contractor except T/F)
83Mounting of 25 KV T/F form dump place to newly constructed Double pole & its commissioning including jumepring with all system ((All the required material for above job shall be provided by contractor except T/F)
84Mounting of 63 KV T/F form dump place to newly constructed Double pole & its commissioning including jumepring with all system ((All the required material for above job shall be provided by contractor except T/F)
85ACSR Dog Conductor stringing sagging binding and jumpering of with all accessories
86ACSR Rabbit Conductor stringing sagging binding and jumpering of ABC with all accessories
87ACSR Waeasel stringing sagging binding and jumpering of ABC with all accessories
88Hoisting of 11 kv XLPE (3x120/3x 185 )sq.mm with the provision of G.I. Pipe of size 150 mm dia. (
89Tailless Unit with all Accessories
90Grouting of Pole in deep 1/6 the length of Pole in ratio 1:4:6 in cement sand & bla ST
91Muffing Plinth 300mmX45mm Above ground level in Ratio 1:2:4 in cement coarse sand & stone grit
92Grouting and Nozzling of 11 KV / 33 kv stayset complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor.
93Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule. All material except earthing rod shall be supplied by the contractor.
94Earthling by way of Boring and lowering the \\"B\\" class GI pipe (Gindal ) of 50mm dia from ground upto water level not less than 20mtr as per standard practice
95Laying of 11KV (3x70/3x185/3x120mm) single XLPE cable by digging of trench size 500 mm wide 900 mm after laying of brick, sand and stone slab.
96Installation of 11 kv I/D cable box (3x70/3x185/3x120). All material shall be supplied by the Department.
97Installation of 11 kv O/D cable box (3x70/3x185/3x120). All material shall be supplied by the Department.
98Installation of 11 KV CT/PT double metering unit of constructed double pole structure as per RESPO norms. Only 11 KV CT/PT unit shall be supplied by department.
99Fixing & commissioning of 11 KV pilfer Resistance meter All material except pilfer Resistance metering cubical shall be supplied by the contractor.
100Stringing & Sagging ABC (3X95+1X35+1X16)Sqmm
101Stringing & Sagging ABC (3X50+1X35+1X16)Sqmm
102Stringing & Sagging ABC (1x25+1X16)Sqmm
103Stringing & Sagging ABC (3X120+1X95+1X16 Sqmm)
104Tree cutting
105Dismantling of old & used (Existing) material and loading, Carriage & unloading from site to JE Dump store/store centre, Hardoi. (approx 40 Km)
106Dismentling of line (Scrap conductor)
107PCC 8.5 mtr long single pole with all accessories
108PCC 8.5 mtr long double pole with all accessories
109STP 11 mtr long single pole with all accessories
110STP 11 mtr long double pole with all accessories
111TRANSFORMER 250/400/630, KVA
112100 KVA T/F on Double pole with all accessories.
11363/25 KVA T/F on Double pole with all accessories.
114Carriage of material pit site to Hardoi store Je dump store/store center of Hardoi. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58332825
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 28.91 Lakhs
LAST DATE 12-11-2026
Authority
Authority Name Madhyanchal Vidut Vitran Nigam Limited
Work Description Tender for New Connections/Lines / Increasing Capacity Works And Other Associated Works Under The Deposited Scheme In The Area Of Electricity Distribution-Sub Division Atrouli, Kachhona, & Sandila, Under Edd Sadnila
Basic Detail
Tender No 49/EDC(H)/2026-27
Bidding Type Tender
Location
City Hardoi
State Uttar Pradesh
Key Dates
Publish Date 02 Nov 2026
Submission Date 12 Nov 2026
Open Date 13 Nov 2026
Finance
Tender Value 28.91 Lakhs
Tender Fee 3540
EMD 28910
Exemption Not Available
Document List
BOQ_2280970.xls
d47c4a27-c9df-4f2e-a8f4-297fac052903.html
TD.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2280970.xls

html

d47c4a27-c9df-4f2e-a8f4-297fac052903.html

pdf

TD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender