Tender For Modernisation And Refurbishment Of Existing Heart Gallery Including Entrance Feature, Interior Finishes, 3D Heart Display, Racks And Lighting At Periyar Science And Technology Centre, Chennai
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
11 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernisation And Refurbishment Of Existing Heart Gallery Including Entrance Feature, Interior Finishes, 3D Heart Display, Racks And Lighting At Periyar Science And Technology Centre, Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Modernisation and Refurbishment of existing Heart Gallery including Entrance Feature, Interior Finishes, 3D Heart Display, Racks and Lighting at Periyar Science and Technology Centre, Chennai |
| 2 | E1 – 3D-effect anatomical heart mural with acrylic wall painting and waterproof protective finish (Please refer the Tender Document)(10 ft × 12 ft gross envelope; verify actual paint area/doorway deduction) |
| 3 | E2 – Left corridor wall painting in smoke-grey colour, including surface preparation and primer (Please refer the Tender Document)(30 ft × measured wall height; verify on site) |
| 4 | E3 – Right corridor wall painting in smoke-grey colour, including surface preparation and primer (Please refer the Tender Document)(30 ft × measured wall height; verify on site) |
| 5 | H1 – Main hall wall putty work, including surface preparation and smooth finishing (Please refer the Tender Document)(Gross area based on (100 + 200 + 180 ft) × 16 ft; verify openings) |
| 6 | H2 – Main hall wall painting in smoke-grey colour, including primer and two coats (Please refer the Tender Document)(Same wall area as previous item; separate operation) |
| 7 | H3 – Existing ceiling painting in off-white colour, including preparation and beam/return surfaces (Please refer the Tender Document)(Measure developed paintable surface; plan area alone may differ) |
| 8 | H4 – Existing tiled floor deep cleaning and matte restoration / polishing, with a non-slippery finish (Please refer the Tender Document)(Provisional triangular floor area; verify) |
| 9 | F1 – Decorative 3D embossed/formed entrance facade cladding, including approved finish (Please refer the Tender Document)(392 sq ft projected face only; measure actual 3D facets/returns) |
| 10 | F2 – Concealed supporting frame and anchoring system for entrance facade (MS or Aluminium) (Please refer the Tender Document)(Based on approved drawings; define measurable scope) |
| 11 | F3 – Programmable cyan/blue running LED lines, including controllers, drivers and wiring (Please refer the Tender Document)(Finalise LED lengths/layout before tender) |
| 12 | F4 – Entrance facade heartbeat-style lighting effect, including control system (Please refer the Tender Document)(Lighting effect only; no mechanical movement) |
| 13 | F5 – Three glass entrance doors, including frames and suitable hardware (Please refer the Tender Document)(Specify glass type/thickness, frame and hardware) |
| 14 | P1 – Large wall-mounted 3D anatomical heart display, approximately 8 ft × 8 ft (Please refer the Tender Document)(Final dimensions/design subject to approval and site safety) |
| 15 | P2 – Surrounding illuminated vein/vessel display, with inward-running light effect (Please refer the Tender Document)(Extent/lengths to be finalised) |
| 16 | P3 – Heart expansion/contraction mechanism, coordinated with illuminated vessel effects (Please refer the Tender Document)(Separate from entrance heartbeat lighting) |
| 17 | P4 – Design submission, animation demonstration, testing and approval for the 3D heart display (Please refer the Tender Document)(Finalise electrical layout and scope) |
| 18 | I2 – Interior illuminated wall framework and plain white/opalescent acrylic facing (Please refer the Tender Document)(Provisional assuming finish stops at 10 ft ceiling level) |
| 19 | I3 – Printed translucent 3D-effect graphics, including application and alignment (Please refer the Tender Document)(Verify wall height and openings) |
| 20 | C1 – PVC-coated modular false ceiling, 2 ft × 2 ft panels, nominal 18 mm thick, including support framework (Please refer the Tender Document)(Reported 10,320 sq ft; reconcile against actual ceiling/floor area) |
| 21 | C2 – Soft-box ceiling lights, 2 ft × 2 ft, including fixing and wiring (Please refer the Tender Document) |
| 22 | C3 – Additional UV lighting system, including controls and safety provisions (Please refer the Tender Document)(Specify type, quantity, spectrum and layout before publication) |
| 23 | FL1 – 5 mm wood-finish vinyl flooring, including approved adhesive application (Please refer the Tender Document)(Provisional 85 ft × 120 ft; verify site/deductions) |
| 24 | W1 – Openable uPVC-framed window, nominally 4 ft × 12 ft, including hardware and installation (Please refer the Tender Document)(Verify position and ceiling junction) |
| 25 | W2 – Wooden-finish horizontal blinds and separate complete blackout provision (Please refer the Tender Document)(Blinds alone are not a blackout barrier) |
| 26 | R1 – Refurbishment of existing curved wooden display racks, including decorative laminate and black carbon-fibre-look side finish (8 racks nominal 10 ft × 8 ft; verify finish areas) (Please refer the Tender Document) |
| 27 | R2 – Refurbishment of existing 4 ft × 8 ft steel display racks, including repairs, powder coating and shelf laminate (18 racks; measure actual finish areas) (Please refer the Tender Document) |
| 28 | R3 – Refurbishment of existing 2 ft × 8 ft narrow steel display racks, including repairs, powder coating and shelf laminate (4 racks; measure actual finish areas) (Please refer the Tender Document) |
| 29 | L1 – Continuous steady-white linear LED lighting for the approved upper and lower hall routes (1,000 ft combined upper/lower route; verify) (Please refer the Tender Document) |
| 30 | L2 – Aluminium LED profile, opal diffuser, end caps and fixing accessories (Avoid duplicate charge if included in LED rate) (Please refer the Tender Document) |
| 31 | L3 – Compatible LED drivers/power supplies, rated for the approved load (Calculate from selected system and approved load layout) |
| 32 | L4 – Power and LED feed wiring, including connections and terminations (Measure route on site) |
| 33 | L5 – Conduit/trunking, junction boxes and wiring accessories (Finalise quantities/scope before tender) |
| 34 | L6 – Switching, circuit protection, earthling and electrical connections (As per approved electrical design) |
| 35 | L7 – Testing, commissioning, adjustment, making good, final cleaning and handover of the linear LED lighting system (Avoid duplication with other item rates) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender