Tender For Construction Of External Toilet Block At Fiac , Pipili, Block-Pipili, Dist-Puri
Tender Value
5.05 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
4 days left
EMD
5500
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of External Toilet Block At Fiac , Pipili, Block-Pipili, Dist-Puri
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge. |
| 2 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge . |
| 3 | Supplying, filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will betaken on finished compacted section only). |
| 4 | C.C.( 1:3:6) in foundation and floors using 4cm (1½”) size HGCB metal with all labour,cess and T&P required for the work etc. complete in all respect. |
| 5 | R.C.C. work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring shuttering and finishing the exposed surface smooth providing groves or beds wherever necessary including cost, conveyance, royalties and excluding GST and cost of all materials and labour with T & P required for the work etc. complete in all respect excluding the cost of M.S. Rods or Tor steel and binding wires and labour charge for bending binding and tying grills as directed by the Engineer – in charge. |
| 6 | (a) Column base |
| 7 | (b) Plinth Beam |
| 8 | (c) Column and beam |
| 9 | (d) Lintel |
| 10 | (e) Roof beam |
| 11 | (f) Roof slab |
| 12 | (g) Chajja |
| 13 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance and excluding GST of all materials with labour, cess and T&P etc. required for the work complete. |
| 14 | Fly Ash brick masonry in cement mortar (1:6) in Plinth & Foundation work using fly ash bricks of (25x12x8)cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 15 | Fly Ash brick masonry in cement mortar (1:6) in Super strucutre work using fly ash bricks of (25x12x8)cm size having a crushing strength of not less than 100kg/cm2 to 149Kg/sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similarsuch type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for thework complete in all respect in all floors. |
| 16 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 17 | 16 mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after rakingout the joints including watering and curing with cost withcost, conveyance, royalties and excluding GST of all materialswith all labour, T&P required for the work etc. complete. |
| 18 | 12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect. |
| 19 | Cement punning including cost, conveyance of cement and curing etc. complete as per direction of Engg-in-Charge . |
| 20 | Fixing Ceramic tiles in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 21 | Fixing Ceramic tiles in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 22 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete |
| 23 | G Floor |
| 24 | Wall painting two coats with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .Data for 10.00 Sqm.. |
| 25 | Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint. |
| 26 | G Floor |
| 27 | 2.5cm.grading concrete (1:2:2) on roof slab using 6mm.size CBHG chips including cost,conveyance and royalty of materials curing etc.complete as per direction of Engg-in-Charge . (On new work) |
| 28 | Supplying, fitting and fixing of fabricated M.S Door& Window with grills and shutter /Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles /MSPlate as per approved drawing and design, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors. |
| 29 | Primimg one coat with any approved red oxide primer over iron works including cost of primer. |
| 30 | Enamel Painting two coats with enamel paint of approved quality etc. complete as per direction of Engg-in-Charge . |
| 31 | Fixing granite tiles of 0.10 Sqm. & upto 0.4 Sqm. (10mm. thick) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, poloshing complete excluding cost of tiles etc. complete as per direction of Engg-in-Charge . |
| 32 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures |
| 33 | PH&Sanitary Fittings |
| 34 | Cutting holes through existing brick work including making good the same in cement mortar 1:4 for taking G.I pipes and fittings P.V.Cpipes and fittings all complete as per Engg.-in- charge. |
| 35 | Cutting holes in R.C.C floors & roos upto 19cm thick for passing G.I/P.V.C pipes and fitting etc. and prepairing the holes after insertion of pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof as per Engg.-in- charge. |
| 36 | Cutting groves in pucca floor and wall for taking G.I/P.V.C pipes and making good the damage for 30m long as per Engg.-in- charge. |
| 37 | Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete. |
| 38 | 75mm pipe |
| 39 | 110mm pipe |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 41 | 20mm pipe |
| 42 | 25mm pipe |
| 43 | Fixing wash down water closet (Europian type WC ) with integral 'S' and 'P' trap to the floor with wooden plug and chromum plated screw including jointing the trap including eat cover all complete etc. complete. |
| 44 | Fixing 12.50 litres capacity low level Flushing Cistern with a pair of cast iron or M S brakets complete with fittings such as siphonic arrangement including all fittings etc. complete as per direction of Engg. in charge. |
| 45 | Fixing (Squatting Urinal(Ladies) of size 450x350x85mm including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc. complete as per direction of Engg. in charge. |
| 46 | Fixing Standing Urinal(Gents) of size 450x350x100mm including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc. complete as per direction of Engg. in charge. |
| 47 | Fixing Wash Basin with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge. |
| 48 | Fixing of brass screw-down Bib cocks(Taps) polished bright of the following nominal size as per specification etc. complete as per direction of Engg. in charge. |
| 49 | Long Body |
| 50 | Short Body |
| 51 | Fixing of brass Angle Stop Cock polished bright of the following nominal size as per specification etc. complete as per direction of Engg. in charge. |
| 52 | Fixing of brass Concealed Stop Cock polished bright of the following nominal size as per specification etc. complete as per direction of Engg. in charge. |
| 53 | Fixing of brass Over Head Shower polished bright of the following nominal size as per specification etc. complete as per direction of Engg. in charge. |
| 54 | Fixing standard size chromimum plated Brass Towel Rail complete with chromim plated brass bracket fixed to wooden/pvc plugs with chromomum plated brass screw complete as per specification etc. complete as per direction of Engg. in charge. |
| 55 | Fixing of brass Hand Shower polished bright of the following nominal size as per specification etc. complete as per direction of Engg. in charge. |
| 56 | Fixing standard sizechromimum plated Brass Soap Dish Holder complete with chromim plated brass bracket fixed to wooden/pvc plugs with chromomum plated brass screw complete as per specification etc. complete as per direction of Engg. in charge. |
| 57 | PVC Connection pipe complete as per specification etc. complete as per direction of Engg. in charge. |
| 58 | Electrical Connection |
| 59 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 60 | Group A |
| 61 | Recessed wiring to Submain with 2 x 2.5 sq. mm. FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit along with with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as tequred as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 62 | Installation, Testing and Commisioning of 3 W LED Spot LIte etc. directctly in celling/ wall , including connection with 1.5 sq. mm FR PVC insulated copper conductor and earthing as required as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 63 | Supplying and fixing of following modular type (4 Module)switch / socket including cover with all connections etc as required. as per direction of Engineer in Charge. |
| 64 | Installation, Testing and Commisioning of Exhaust Fan up to 450 mm sweep in the existing opening, including making the holes to the size of the above fan, making good the damage complete, connection etc. as required as per direction of Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender