Tender For Renewal Coat/ Macadamisation Of Road Namely L023-T01 To Nallah Awoora Jk01-220,Length 3.50 Km, Under C&T Incentive Head 2026-27, Pmgsy Division Anantnag
Tender Value
82.85 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
9 days left
EMD
1.66 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renewal Coat/ Macadamisation Of Road Namely L023-T01 To Nallah Awoora Jk01-220,Length 3.50 Km, Under C&T Incentive Head 2026-27, Pmgsy Division Anantnag
BOQ
| Sl. No. | Item Description |
| 1 | Part A:- Initial Rehabilitation |
| 2 | (I) Cement Concrete Drain |
| 3 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary soil up to 3 m depth |
| 4 | Type-B (First Class Bedding) |
| 5 | Laying (First Class) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii).including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete ) |
| 6 | Providing concrete for Plain / reinforced concrete in open foundation including dewatering complete as per drawings and technical specification clause 802,803, 1202 and 1203.Including loading, unloading,haulages, royality,octorie form work etc complete. P.C.C grade M-10.including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete job ) |
| 7 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC M-15 Grade (nominal mix). including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete Job ) |
| 8 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and echnical specifications Clause 802, 803, 1202 & 1203 R.C.C grade M 20 including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete Job ) |
| 9 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and echnical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 20 (Flooring) including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete Job ) |
| 10 | Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete Job ) |
| 11 | (II)-Road Furniture |
| 12 | Re-Writing and Re-painting of typical PMGSY informatory sign board with Logo as per MORD specification and drawing |
| 13 | Re-Writing and Re-painting of citizens informatory as per MORD specification and drawing |
| 14 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
| 15 | Providing and fixing retro- refllectorised cautionary , mandatory and informatory sign as per IRC :67 made of encapsulated lense type reflective sheeting wide clause 1701, 2.3 fixed over aluminum sheeting 1.5mm thick supported on a mild steel angle iron post 75 x75 x6mm steel tube firmly fixed to the ground by properly designed foundation with M-15 grade cement concrete 450 x450 x 600mm , 600mm below round level as per drawing and technical clause 801.(Complete Job Finished work to be measured) |
| 16 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 Ordinary Kilometer Stone (Precast) . (Complete Job Finished work to be measured) |
| 17 | Part B:- Renewal Coat |
| 18 | Preparation of Foundation for EmbankmentScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per TechnicalSpecification Clause 301.4. |
| 19 | Bituminious macadam:-Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. Including cost and carriage of all materials from approved plant to site with all leads and lifts and octori etc complete job (Finished work to be measured).including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete ) |
| 20 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503..including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete ) |
| 21 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumenor emulsion to required line, grade and level to serve as wearing course on apreviously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per TechnicalSpecification Clause 508 By Mechanical Means.including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete ) |
| 22 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as perTechnical Specification Clause 510 By Mechanical MeansType B .including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete ) |
| 23 | Rates (in Rs.) Applicable for routine maintenance before renewal will be as under * |
| 24 | 1st year |
| 25 | 2nd Year |
| 26 | 3rd Year |
| 27 | 4th Year |
| 28 | 5th Year |
| 29 | Rates (in Rs.) Applicable for routine maintenance After renewal will be as under * |
| 30 | 1st year |
| 31 | 2nd Year |
| 32 | 3rd Year |
| 33 | 4th Year |
| 34 | 5th Year Total Routine Maintenance Rate Applicable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender