Tender For Provn Of Rain Water Harvesting System (Rwh) At Certain Units At Raiwala Mil Stn Under Age(I) Raiwala
Tender Value
19.41 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
13 days left
EMD
38838
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Rain Water Harvesting System (Rwh) At Certain Units At Raiwala Mil Stn Under Age(I) Raiwala
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas, n exc 1.5m deep and getting out in any type of soil complete all as specified and directed. |
| 2 | Excavating over areas, exc 1.5m n exc 3.0 m deep and getting out in any type of soil complete all as specified and directed. |
| 3 | Excavating over areas, exc 3.0 m n exc 4.5 m deep and getting out in any type of soil complete all as specified and directed. |
| 4 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 5 | M&L for PCC (1:4:8) Type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. |
| 7 | Removal of surplus soil to a distance n exc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 8 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 9 | M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for precast RCC (1:2:4) type B1, (using 20mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces set in CM 1:4 including necessary fair finish formwork complete all as specified and directed. |
| 11 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to wall of following size complete all as specified and as directed :- |
| 13 | 110 mm bore |
| 14 | S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof with fastner for 110 mm bore of pipe complete all as specified and directed. |
| 15 | S&F PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface of following size complete all as specified and as directed :- |
| 16 | 110 mm bore |
| 17 | S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of colour, as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 18 | M&L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains hand made sliding bolts; clamps hold fasts; wall ties; hooks forhanging fans, plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 Complete all as specified and directed |
| 19 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. |
| 20 | M&L Loose filling with aggregates of broken stone or boulders of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed. |
| 21 | S&F rolled mild steel section for structural steel work as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-290(Gde-E-165) complete all as specified and as directed.Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. |
| 22 | M&L for salt glazed stone ware (SGSW) drain pipe, grade A, ISI marked, laid in trenches and jointed in CM (1:1) for following bore of pipe complete all as specified and directed :- |
| 23 | 150mm bore |
| 24 | M&L concrete bed to drain pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for following bore sewer pipe line complete all as specified and directed :- |
| 25 | 150mm bore |
| 26 | M&L brick work with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and directed. |
| 27 | S&F expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight not exc 4kg per sqm complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender