Tender For Provn Of 02 X Bath And 02 X Toilet Block Alongwith special Repair Of Internal Fitting In Children School And Paed Floor Tile Work At Mh Under Zone-Ii Area At Jaipur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
11 days left
EMD
48380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 02 X Bath And 02 X Toilet Block Alongwith special Repair Of Internal Fitting In Children School And Paed Floor Tile Work At Mh Under Zone-Ii Area At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15cm deep avg in soft/lose soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation etc or for shafts, wells, manholes, pier holes, laying of cables etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 3 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L pre-cast cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 5 | M & L for 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) Damp proof course to horizontal or vertical surfaces including necessary formwork and finishing the surface even and smooth complete all as specified and directed |
| 6 | Supply only Integral water proofing compound ISI marked complete all as specified and directed. |
| 7 | Providing 20mm thick bearing plaster in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 12 | M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper of approved tint over one coat of priming paint over wall care putty complete all as specified and directed. |
| 13 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint of approved tint over one coat of primer with alkali resistant priming paintcomplete all as specified and as directed |
| 14 | M & L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directedNote : Reinforcement & formwork shall be measured and paid for separately. |
| 15 | M&L for RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.Note : Reinforcement & formwork shall be measured and paid for separately. |
| 16 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat with rough finished surfaces of concrete complete all as specified. |
| 17 | Use & waste of form work to sides of square, rectangular or polygon pillars, posts, struts, piers, columns and stanchions etc.and similar work with rough finished surface of concrete complete all as specified and directed. |
| 18 | M & L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.Note : Reinforcement & formwork shall be measured and paid for separately. |
| 19 | M & L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directedNote : Reinforcement & formwork shall be measured and paid for separately. |
| 20 | M&L Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed and specified. |
| 21 | ,--- ditto--- all as per srl item No. 20 above but TMT bar of 6 to 8mm dia complete all as directed and specified. |
| 22 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed. |
| 23 | Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide for rough finished surfaces all as specified and directed. |
| 24 | Use & waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.and similar items with rough finished surface of concrete complete all as specified and directed. |
| 25 | M&L for Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 26 | M&L hardcore of Broken stones or Boulders of gauge exc 63 mm but n exc 100mm, deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed. |
| 27 | M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 28 | M & L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. |
| 29 | M&L for coloured jointfree non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 30 | M&L for coloured glazed ceramic tiles 450mm X 350mm X 7 to 8mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 31 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete as directed and specified. |
| 32 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 33 | S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised size 100mm long ISI marked type B21 complete all as specified and directed |
| 34 | S&F 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. |
| 35 | S&F 150mm long aluminium anodised handles, cast type anodised complete all as specified and directed. |
| 36 | S&F 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 37 | ,---ditto--- all as per item No. 36 above but 20mm bore tubing complete all as specified and directed. |
| 38 | ,---ditto--- all as per item No. 36 above but 25mm bore tubing complete all as specified and directed. |
| 39 | Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm complete all as specified and directed. |
| 40 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed. |
| 41 | Removing excavated material to a distance n. exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed. |
| 42 | S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and including waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 43 | S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 44 | S & F 110mm bore PVC (SWR) WC connector with lip ring complete all as specified and as directed. |
| 45 | S&F PVC valveless, syphonic action type flushing cistern, low level, 10 ltr capacity, white, with intel, ball valve, float and handle including brakects, 32 mm dia polyethylene of low or high density or PVC flushing pipe and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified & as directed. |
| 46 | S&F PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. |
| 47 | S & F 75mm dia outlet cast iron floor trap with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 48 | S&F 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. |
| 49 | S&F 20mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. |
| 50 | S&F 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 51 | S&F tubular towel rail, brass chromium plated, 20 mm dia ''D'' type, 60 cm long between flanges and fixed complete all as specified and directed. |
| 52 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 53 | S&F vitreous china wash hand basin white flat back of size 580 x 450 mm excluding taps, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, 32mm dia PVC waste pipe, flange end bedded in red lead cement and other end fixed, cutting for and pinning in ends of brackets complete all as specified and directed. |
| 54 | S&F Pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm complete all as specified & as directed. |
| 55 | S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed. |
| 56 | S & F 500 Ltrs capacity rotational moulded polyethylene water storage tank, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.Note : Minimum weight for 20 mm dia shall not be less than 210gms. |
| 58 | S&F 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamps any type complete all as specified & directed. |
| 59 | S&F 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamps any type complete all as specified & directed. |
| 60 | S&F 110mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal with oval access door complete all as specified and directed. |
| 61 | S&F 75mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal with oval access door complete all as specified and directed. |
| 62 | S&F 110 mm dia UPVC (SWR) bends with oval access door any radius complete all as specified and as directed. |
| 63 | S&F 75 mm dia UPVC (SWR) bends with oval access door any radius complete all as specified and as directed. |
| 64 | S&F Steel ventilator with top hung shutter including hinges, steel pegstay complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 65 | S&F Steel ventilator with top hung shutter including hinges, steel pegstay complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender