Tender For Repair And Replacement Of Road Furniture And Connected Works Under Aor Of Age B&R-I Under Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
49.70 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
14 days left
EMD
99400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement Of Road Furniture And Connected Works Under Aor Of Age B&R-I Under Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix including taking down convex Mirror of 100cm dia made from long life poly carbonet with strong impact rassisiant and shatter proof fitted with a sun shield or colour as approved by GE provided with 75mm dia mild steel pipe (suitable length as directed) dully painted with synthetic enamel paint to approve coloure over a coat of red oxide primer , including embedding in PCC (1:2:4, type B-1) block of size 450x450 600mm including necessary earth work complete all as specified and as directed. |
| 2 | Supply and fix in replacement solar road stud having 3 LED of colour Red/Yellow to a side (total 6 Nos) housed in a toughl pressure die casted aluminium alloy of size 125 x 125mm or 120 x 130mm with built in stem of suitable llenath for fixing with epoxy, LEDS solar cells battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet top system, workable for 2-3 days (night) after full chargel lin 8 to 10 Hrs and fixing the same on road surface by applying approximately 100gm epoxy mixture and placing the cat eye without applying exessive pressure and additional fixed with zinc plated steel nail of suitable size as per manufacturers instruction at the center of cat eye complete all as specified and directed |
| 3 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 4 | Providing and fixing in repair solar powered road delineator with LED flasher arrangement, complete, comprising UV-stabilized, weather-resistant and impact-resistant HDPE/ABS/polycarbonate delineator post of 45/50 mm dia mild steel pipe of 900 mm height approved shape, size and colour, having high-intensity retro-reflective sheeting/reflectors on both sides, integrated solar photovoltaic panel of suitable capacity, rechargeable maintenance-free battery, automatic dusk-to-dawn light sensor/controller, high-intensity LED/flasher unit with amber/yellow/red indication as approved, suitable flashing circuit, ON/OFF/automatic control arrangement, battery compartment and all necessary internal wiring, terminals, connectors, mounting/fixing accessories, GI/MS support/post/base plate, anchor fasteners and other accessories required for complete installation. Solar panel shall charge the battery during daylight and LED flasher shall operate automatically during low-light/night conditions. The unit shall be suitable for outdoor road-side installation, resistant to rain, dust, UV radiation and normal impact/vibration, and shall provide clear visibility to approaching traffic. Including transportation, handling, installation, fixing, testing and commissioning complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 5 | Supply and fixing in replacement two way (dual direction) reflctive road studs (cat eyes) of plastic boty of dimension 100mmx110mmx18.5mm with amber/red/yellow reflective panels and fixing the same on road surface by applving approximately 100 gm Epoxy mixture and placing the cat eye without applying exessive pressure and additional fixed with 08mm dia and 120mm long zinc plated steel nail at the centre of cat complete all as specified and directed. |
| 6 | M & L for frame work for sign board or any other structure/ position made out of stainless steel chromium plated round/ square pipes 304 grade, cut to shape including bending, welding, drilling, gusset plates and riveting complete all as specified and directed by Engineer-in-Charge.Note:- Rate is including for necessary accessories required at site including leg/ post embedded in PCC block of size 40cm x 40cm x 50 cm in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including necessary excavation and earth work complete all as specified and directed by Eng-in-Charge. |
| 7 | Supply and fixing in aluminium composite panel sheet 3mm thick (ACP Sheet) used for informatory/ cautionary/ warning sign board for road safety features etc, fitted / framed in steel pipe frame including fixing arrangements complete all as specified and directed by Eng-in-Charge.Note:- Steel frame, legs, letter writing shall be measured and paid separately under appropriate item of BOQ. |
| 8 | Material and labour for writing letter or figures arrows, symbols, Bldgs/ colony layout computer cut (Block Roman), italic or Indian) width 25mm and height as directed by Eng-in-Charge, made out of reflective luminious tape as per IRC standard, in approved colour, pasted firmly without appearance/ sign of bubbles on aluminium sheet complete all as specified and directed . |
| 9 | Supply and Fixing to Road Speed breaker having high intensity cube corner reflector, high impact resistant ABS plastic body of size 250mmx345mmx50mm (height) fixing the same on road surface by applying and steel nails as per manufacturers instruction complete all as specified and directed . |
| 10 | Supply and Fixing to LED blinking warning light comprising hight intensity amber LED , weather proof housing, rechargeble battery with power supply as specified, complete with mounting bracket,clamp, wiring testing and commissioning complete all as specified and directed . |
| 11 | Supply and Fixing for Solar flashing beacon comprising high-intensity amber LED flasher, mono-crystaline solar panel, rechargeble maintenance-free battery, weatherproof polycarbonet housing, mounting bracket,clamp, wiring testing and commissioning complete all as specified and directed. |
| 12 | Supply and Fixing for prefabricated heavy duty ruber rumble strips of size 500x150mmx25mm with high intensity yellow/black retro-reflective markings, fixed to the existing road surface with anchor bolts and epoxy adhesive, including drilling, fixing testing and all accessories complete all as specified and directed by Eng-in-Charge. |
| 13 | M&L for road marking of thermoplastic reflective 2mm thick in strips of 100mm/150mm width on old road surface to be carried out mechanically with hot application of material ( painting material @ 5 Kg /sqm and glass beads @ 250gm/sqm conforming to MORT&H (clause 803.4) complete all as specified and as directed. |
| 14 | Supply and Fixing road safety hump of size 100mm hight and full width of carriage way (3.70m) using premoulded heavy-duty rubber modules with black and yellow reflective markings, fixed to the road surface with anchor bolts and epoxy adhesive, including drilling, fixing testing and all accessories complete all as specified and directed . |
| 15 | M&L for preparation of old or previously treated/untreated concrete surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint in different tint (White / Black/ yellow/Red/Blue) complete all as specified and as directed. |
| 16 | Supply and fixing solar traffic blinker light of dia 300 mm with RED/AMBER colour build in battery 7AH having 192 LEDS Visiblity 100 mtr well protected linside under tough unbreakable polycarbonate sheet including 30 wat solar panel with solar pole made out of MS pipe medium grade 80 mm outer dia 1.6mm thickness powder coated yellow colour cable panel stand, blinker Imounting accessories, pole height 3.2 mtr to 3.5 mtr as per site reguirement lincluding excavation and PCC (1:2:4) 20 mm graded stone aggregate for embedding pole below ground level as per manufacturer's recommendation and spreading the excavated soil nearby on NGL complete all as specified Jand as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender