Tender For Providing Equipment Perimeter Guard For Equipment In Plant Shop And Raw Water Pipe Line And Its Structure Painting From Heavy Water Plant Kota To Nfc-Kota Plant, Rawatbhata, Rajasthan.
Tender Value
36.58 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
73169
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chittorgarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Equipment Perimeter Guard For Equipment In Plant Shop And Raw Water Pipe Line And Its Structure Painting From Heavy Water Plant Kota To Nfc-Kota Plant, Rawatbhata, Rajasthan.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation of Mild steel Weldmesh wire fence of ground up system, wire thickness min 3.0 mm, Mesh size 100x20mm, V-bend at top of bottom of fence, width of panel not more than 1.5m, spaced equally in lenght. Each panel shall have perimeter of min SHS 20x20x2.0 hollow section. The entire mesh and SHS perimeter shall be powder coated with outdoor grade pure polyester powder coating conforming to IS 13871, minimum dry film thickness 80 micron, applied after suitable chemical pre-treatment. (Moss, Green, Jet Black, Glossy yello or as approved), including the clamps and bolts for fixing the panel to RHS post. (the area of the panel will be measured for payment) |
| 2 | Supply and fixing in position RHS post of 60x40x2.0mm confirming to IS 4923 powder coated with minimum thickness of 80 micron in approved colour (Moss, Green, Jet Black, Glossy yello or as approved), including post cap and base plate of minimum 6mm thick |
| 3 | Supply and installation sliding gates of Mild steel Weldmesh wire fence of ground up system, wire thickness min 3.0 mm, Mesh size 100x20mm, V-bend at top of bottom of fence, width of panel not more than 1.5m, spaced equally in lenght. Each panel shall have perimeter of SHS 30x30x2.9 hollow section. The entire mesh and SHS perimeter shall be powder coated with outdoor grade pure polyester powder coating conforming to IS 13871, minimum dry film thickness 80 micron, applied after suitable chemical pre-treatment. (Moss, Green, Jet Black, Glossy yello or as approved), including the hardwares like bottom fixed sliding track minimum 3.5mm thick, heavy duty adjustable double nylong rollers, 2Nos minimum Galvanized sliding gate metal roller wheel with exteriod bracket and 2 Nos handles for pull and push for each panel. The panel shall be 900mm more in length than the opening size. The entire area of sliding panel shall be measured for payment. |
| 4 | Supply and installation single/double swing gates of Mild steel Weldmesh wire fence of ground up system, wire thickness min 3.0 mm, Mesh size 100x20mm, V-bend at top of bottom of fence, width of panel not more than 1.5m, spaced equally in lenght. Each panel shall have perimeter of SHS 30x30x2.9 hollow section. The entire mesh and SHS perimeter shall be powder coated with outdoor grade pure polyester powder coating conforming to IS 13871, minimum dry film thickness 80 micron, applied after suitable chemical pre-treatment. (Moss, Green, Jet Black, Glossy yello or as approved), including the hardwares like Heavy-duty welded/bolted swing gate hinges, Center drop bolts, 2 Nos D handles for pull and push for each panel |
| 5 | Providing and fixing GI mechanical anchor fasteners of Hilti Stud anchor HST4 M10x110 or equivalent including drilling holes in concrete/masonary, cleaning the holes with blower and placing, tightening the anchors in position all completed. |
| 6 | Providing and fixing Rim lock vertibolt type of Godrej Rim Lock Vertibolt Ultra XL+ or similar for sliding and swing gate. |
| 7 | Providing and carrying out surface preparation of existing M.S. pipelines for application of protective coating system by removing all loose rust, loose mill scale, loose and defective paint, dirt, dust, grease, oil and other foreign matter by mechanical means using power wire brushing, grinding, needle gunning, scrapers and other suitable power tools. The work shall include feathering of edges of sound existing coating, cleaning of weld joints, corners and inaccessible locations, and preparation of rusted/exposed steel surfaces to SSPC-SP 11 (Power Tool Cleaning to Bare Metal) and remaining sound coated surfaces to SSPC-SP 3 (Power Tool Cleaning), followed by cleaning of the prepared surface with compressed air/clean cloth to remove all dust and debris, including all labour, materials, tools and tackles, scaffolding at all heights, consumables and incidental works, complete in all respects as directed by the Engineer-in-Charge. |
| 8 | Providing and applying a three-coat protective coating system on surface prepared steel pipelines, comprising spot application of Zinc Rich Epoxy Primer on all exposed bare metal surfaces at a minimum Dry Film Thickness (DFT) of 40 microns, followed by one coat of High Build Epoxy Intermediate Coat over the entire surface at a minimum DFT of 100 microns, and finishing with one coat of Aliphatic Polyurethane (PU) Finish Paint in approved shade at a minimum DFT of 50 microns, including surface cleaning between coats, proper curing, touch-up of damaged areas, application in accordance with the manufacturer's specifications, and carrying out DFT measurements using calibrated gauges, including all labour, materials, tools and tackles, scaffolding at all heights, consumables and incidental works, complete in all respects as directed by the Engineer-in-Charge. Paint make: Berger paint, Asian Paint, Jotun India, Kansai Nerolac Paints, JSW Paints or equivalent |
| 9 | Providing and applying two-pack Aliphatic Polyurethane (PU) Enamel Finish Paint on existing M.S. structural steel members, including surface preparation by mechanical power tool cleaning conforming to SSPC-SP 3 (Power Tool Cleaning), comprising removal of all loose rust, loose mill scale, loose and defective paint, dust, dirt, grease, oil and other foreign matter by power wire brushing, grinding, scraping and emery papering, including feathering of edges of sound existing coating, cleaning of the prepared surface and making it free from dust and contaminants, followed by application of one coat of two-pack Aliphatic Polyurethane (PU) Enamel Finish Paint of approved shade at a minimum Dry Film Thickness (DFT) of 50 microns, complete as per manufacturer's specifications and directions of the Engineer-in-Charge, including all labour, materials, tools and tackles, scaffolding at all heights, consumables and incidental works, complete in all respects. Paint make: Berger paint, Asian Paint, Jotun India, Kansai Nerolac Paints, JSW Paints or equivalent |
| 10 | Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge. |
| 11 | a) For Rolled steel sections Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender