Tender For Special Repairs To Bldg No T-1273,T-1274,T-1275,T-1270,T-18,T-22,T-26A T-26 And P-15,P-26 And Provn Of Toilet And Bathrooms For Guards And Troop Against (Job No.81 Sa/Btd/Sr (Bldg)-30/2026-27 .Job No.81 Sa/Btd/Sr (Bldg)-28/2026-27 ,Job No.
Tender Value
1.27 Crore
Estimated cost
Bid Submission
30 Nov 2026
25 days left
EMD
2.02 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No T-1273,T-1274,T-1275,T-1270,T-18,T-22,T-26A T-26 And P-15,P-26 And Provn Of Toilet And Bathrooms For Guards And Troop Against (Job No.81 Sa/Btd/Sr (Bldg)-30/2026-27 .Job No.81 Sa/Btd/Sr (Bldg)-28/2026-27 ,Job No.81 Sa/Btd/Rev)-56/2026-27) Under Ge North At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n exc 30 cm deep and averageing 15 cm deep and getting out in loose/soft soil complete all as specified and as directed by Engineer-in- Charge. |
| 2 | Excavation in trenches n exc 1.5 m wide & not exc 1.5 m deep for Foundations etc. and getting out in soft/ loose soil complete all as specified and as directed by Engineer-in- Charge. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed by Engineer-in- Charge. |
| 4 | M&L sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed by Engineer-in- Charge. |
| 5 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in- Charge. |
| 6 | M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in- Charge. |
| 7 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engineer-in- Charge. |
| 8 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel for drain or benching including finishing the top of benching or for kerb/gola and edging even and smooth using extra cement (Forming fair finished channel shall be measured separately)complete all as specified and as directed by Engineer-in- Charge. |
| 9 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling/mass concrete complete all as specified and as directed by Engineer-in- Charge. |
| 10 | RCC design mix M-25 (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in- Charge. |
| 11 | M&L for RCC M-25 grade (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like & similar RCC works complete all as specified and as directed by Engineer-in- Charge. |
| 12 | M&L design mix M-25 as in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in- Charge. |
| 13 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in- Charge |
| 14 | M&L brick work with subclass 'B' brickwork straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified and as directed by Engineer-in- Charge. |
| 15 | M&L brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified and as directed by Engineer-in- Charge.(Except brick) |
| 16 | M&L for brick work with sub class 'B\\" bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4) complete all as specified and as directed by Engineer-in- Charge. |
| 17 | M&L for brick work with fly ash old size bricks staright or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engineer-in- Charge. |
| 18 | M&L for brick work with fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4) complete all as specified and as directed by Engineer-in- Charge. |
| 19 | M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth complete all as specified and as directed by Engineer-in- Charge. |
| 20 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engineer-in- Charge. |
| 21 | M&L use & waste of steel Form work to soffits of suspended slabs such as roof slabs, floor slab, landing and similar work for flat rough finished surface complete all as specified and as directed by Engineer-in- Charge. |
| 22 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each all as specified and directed for windows/ventilators complete all as specified and as directed by Engineer-in- Charge.Note : The item shall include making good the surface/portion affected due to removal of chowkats or frames, including filling, plastering, finishing and matching with the existing surface, wherever required. Nothing extra shall be paid for making good the affected surface. |
| 23 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm not exc 4 each all as specified and directed for doors complete all as specified and as directed by Engineer-in- Charge.Note : The item shall include making good the surface/portion affected due to removal of chowkats or frames, including filling, plastering, finishing and matching with the existing surface, wherever required. Nothing extra shall be paid for making good the affected surface. |
| 24 | Taking down shutters only of any description not exc 1 sqm each including removing from site to store or otherwise as directed complete all as specified and as directed by Engineer-in- Charge. |
| 25 | S&F Factory Made Solid panel PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 2mm thick consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC Sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets foor top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet bedding, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and as directed by Engineer-in- Charge. |
| 26 | M&L Providing and fixing factory made uPVC white colour casement (sliding) window/vent of area not exceeding 1 Sqm each /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and galvanized steel wire mesh cloth 0.56mm nominal dia of wire and average width of aperature and fixed with tinned tacks or galvanised wire staple.(Note :- 5mm thick toughened Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) |
| 27 | M&L Providing and fixing factory made uPVC white colour casement (sliding two/three track) window of area exceeding 1.00 Sqm but not exceeding 2 Sqm each /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and galvanized steel wire mesh cloth 0.56mm nominal dia of wire and average width of aperature and fixed with tinned tacks or galvanised wire staple. including taking down of existing windows complete all as specified and as directed by Engineer-in- Charge.(Note :- 5mm thick toughened Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) |
| 28 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window of area not exceeding 1 Sqm each /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and galvanized steel wire mesh cloth 0.56mm nominal dia of wire and average width of aperature and fixed with tinned tacks or galvanised wire staple. including taking down of existing windows complete all as directed (Note :- 5mm thick toughened Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) complete all as specified and as directed by Engineer-in- Charge. |
| 29 | S&F 150 mm mild steel barrel tower bolts off fabricated type and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 30 | S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 31 | S&F 150 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed complete all as specified and as directed by Engineer-in- Charge. |
| 32 | S&F Butt hinges, medium weight, 125 mm cold rolled mild steel hinges complete all as specified and directed complete all as specified and as directed by Engineer-in- Charge. |
| 33 | S&F Butt hinges, medium weight, 150 mm cold rolled mild steel hinges complete all as specified and directed complete all as specified and as directed by Engineer-in- Charge. |
| 34 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed by Engineer-in- Charge. |
| 35 | S&F in repair 25 mm dia stainless steel Curtain rod with fixing brackets, knobs, rollers etc fancy type complete all as specified and as directed by Engineer-in- Charge. |
| 36 | S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and as directed by Engineer-in- Charge. |
| 37 | S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring complete all as specified and as directed by Engineer-in- Charge. |
| 38 | S&F Door closer hydraulically(cast iron Body) regulated, regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 39 | M&L stainless steel wire cloth 0.36mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in- Charge. |
| 40 | S&F MS flat iron wind ties for roof including all necessary drilling, bolting or riveting etc complete all as specified and as directed by Engineer-in- Charge. |
| 41 | M&L MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in- Charge. |
| 42 | M&L for framed bracket of angles or T with web and flanges cut to shape ,drilled and counter shunk for screw incl bending and welding angles as neccesary guesset plate ,riveting etc for cooler stands and for chajja standings, door angle frame,holdfast and brackets etc. complete all as specified and as directed by Engineer-in- Charge. |
| 43 | M&L for steel reinforcement of TMT bars 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in- Charge. |
| 44 | M&L for MS TMT bars 6mm to 8mm dia and over,cut to length ,bent to shape incl binding with MS annealed wire not less than 0.9mm dia complete all as specified and as directed by Engineer-in- Charge. |
| 45 | M&L for Rolled mild steel section of Fe-410-W (Gde E-250) quality A as in Roof Truss (framed), trussed purlins, gantries, rails amd fastenings in heavy bracket framing (beam, tee, angle, channel or flat sections) incl distance pieces cleats etc complete all as specified and as directed by Engineer-in- Charge. |
| 46 | M&L for Mild steel work in tubular trusses, purlins,Rafter, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed by Engineer-in- Charge. |
| 47 | M&L Steel rolling shutter thickness of lath 1.25mm with ball bering as spacified including top cover , anchoring rod , haps and staple and one shp coat of primer , erected in position as indicated , complete Push pull or manual type, including taking down old complete all as specified and as directed by Engineer-in- Charge. |
| 48 | S & F in repair pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in- Charge. |
| 49 | S & F Mild steel sheet eaves gutters,1 mm thick 100 mm galvanised class 3, half round with rounded edges all as specified and directed by Engr-in-charge. |
| 50 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by Engineer-in- Charge. |
| 51 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed by Engineer-in- Charge. |
| 52 | M&L 75 mm thick cement concrete type-D-2, 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in- Charge. |
| 53 | M&L for 25 mm thick cement concrete type B-1 using 20 mm graded stone aggregate as in levelling course complete all as specified and as directed by Engineer-in- Charge. |
| 54 | Material and Labour for 75 mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and as directed by Engineer-in- Charge.. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ. |
| 55 | M&L for Providing 25 mm thick, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in flooring sub base complete all as specified and as directed by Engineer-in- Charge. |
| 56 | M&L Machine pressed precast concrete interlocking paver block rubberised (colour ) with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed. |
| 57 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr In Charge |
| 58 | Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush and rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid water proof compound shall be measured and paid separately. |
| 59 | Taking down cement plaster of any description, any thickness from internal and external surfaces of walls/soffits / chajjas/parapet walls /ceiling etc .incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in- Charge. |
| 60 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge. |
| 61 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and as directed by Engineer-in- Charge. |
| 62 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and as directed by Engineer-in- Charge. |
| 63 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in- Charge. |
| 64 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in- Charge. |
| 65 | S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and as directed by Engineer-in- Charge. |
| 66 | S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and as directed by Engineer-in- Charge. |
| 67 | S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 68 | S&F 15 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 69 | S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 70 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in- Charge. |
| 71 | S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and as directed by Engineer-in- Charge. |
| 72 | S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays for including bolts & nuts and securing ends of stays for 75 mm bore pipe complete all as specified and as directed by Engineer-in- Charge. |
| 73 | S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in- Charge. |
| 74 | S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in- Charge. |
| 75 | Supply and fixing 50 mm bore PVC (SWR) pipe Type -B single socketed as over flow pipe for water tank in any length with rubber ring joint fixed to walls with projrcted MS clamps of size 25mm x 3mm at 1.2 mtr interval, and making good in cement mortar in 1:3 at opening including complete all as specified and as directed by Engineer-in-charge. |
| 76 | S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints,fixed to walls complete all as specified and as directed by Engineer-in- Charge. |
| 77 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and as directed by Engineer-in- Charge. |
| 78 | S&F in repair 110mm PVC (SWR) bends any radius with access door complete all as specified and as directed by Engineer-in- Charge. |
| 79 | S&F in repair 75mm PVC (SWR) bends any radius with access door complete all as specified and as directed by Engineer-in- Charge. |
| 80 | Supply and Fixing 110 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge. |
| 81 | Supply and Fixing 50 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and as directed by Engineer-in-charge. |
| 82 | S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) with access door complete all as specified and as directed by Engineer-in- Charge. |
| 83 | S&F in repair 75 mm bore PVC (SWR) junction single, (Single T) with access door complete all as specified and as directed by Engineer-in- Charge. |
| 84 | S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in- Charge. |
| 85 | S&F 50 mm PVC (SWR) vent cowl complete all as specified and directed complete all as specified and as directed by Engineer-in- Charge. |
| 86 | S&F in repair 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and as directed by Engineer-in- Charge. |
| 87 | M&L (SWR) guly trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed by Engineer-in- Charge. |
| 88 | M&L 150mmx 100mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' or 'S' and setting and jointing in cement mortar 1:1 complete all as specified and as directed by Engineer-in- Charge. |
| 89 | Cutting into existing manholes for connecting new drains of internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed by Engineer-in- Charge. |
| 90 | S&F in repair SS soap dish complete all as specified and as directed by Engineer-in- Charge. |
| 91 | S&F stainless steel sink, 1.0mm thick for Kitchen with plug, wasts pipe, washers including contilener cast iron bracket, connecting 4mm etc of overall size 495mm x 420mm with bowl size 410 x 330mm x 160 including taking down old complete all as specified and as directed by Engineer-in- Charge. |
| 92 | Demolition Brickwork of stone/boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr In Charge. |
| 93 | Demolition of cement concrete, terrazzo tile of any description in floor in any position not exceeding 15 cm thickness complete all as specified and as directed by Engineer-in- Charge. |
| 94 | Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and as directed by Engineer-in- Charge. |
| 95 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in- Charge. |
| 96 | Dismantling of ceiling boards of any type and any thickness including cover fillets and timber frame work complete all as specified and as directed by Engineer-in- Charge. |
| 97 | Dismantling of Mud in roofs, any thickness, including brick tile, plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge. |
| 98 | Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe up to and incl 150 mm bore pipes all as specified and directed by Engineer-in-Charge. |
| 99 | M&L for powder coated Aluminium frame (three track sliding) and grill (minimum thickness of powder coating 50 micron) for doors, windows with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in- Charge. |
| 100 | M&L powder coated door, window and ventilator shutters (Thickness or powder coating not less than 50 micron ) sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), tower bolt 100mm long (1 no) complete all as specified and as directed by Engineer-in- Charge. |
| 101 | M&L Baroda green marble slab 18- 20mm thick (in full length one piece) in riser of steps,stairs, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in- Charge. |
| 102 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms with polishing and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in- Charge. |
| 103 | M & L 75mm thick PCC 1: 3: 6 type C-2 ( using 40mm graded stone aggregate ) in plinth protection, including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- Charge. |
| 104 | M & L glazed ceramic coloured tiles of size 300x600x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and as directed.. |
| 105 | M&L non skid (matt finish) slip resistant ceramic coloured tiles Premium (1st quality) straight edge, size not exc 0.11 sqm & 7 to 8 mm thick in floors etc in any shade, set & jointed in neat cement slurry & pointed in matching coloured polymer based epoxy grout to match over & including 15 mm thick screed bed in cement mortar 1:4 using type-I adhesive complete all as specified and as directed by Engineer-in- Charge. |
| 106 | M&L non skid (matt finish) slip resistant ceramic coloured tiles Premium (1st quality) straight edge, size not less than 395x395x7 to 8 mm thick in floors etc in any shade, set & jointed in neat cement slurry & pointed in matching coloured polymer based epoxy grout to match over & including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in- Charge. |
| 107 | All as per Item No 85 here in before, coloured tiles 595x100 mm and not less than 8 mm thick on vertical surfaces such as skirtings, set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) using type-I adhesive complete as directed by Engineer-in-Charge. |
| 108 | M & L for Double charge stain free Vitrified ceramic tiles, Premium (1st) quality straight edge, coloured tiles having size not less than 595x595 mm and 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including and over 20 mm thick screed bed in CM 1:4 using type-I adhesive and pointed in epoxy grout to match in floors complete as directed by Engineer-in-Charge. |
| 109 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in- Charge. |
| 110 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces using water proofing liquid (but excluding the cost of water proofing liquid) with CM 1:4 and finishing the surface even and fair complete all as specified and as directed by Engineer-in- Charge. |
| 111 | Material and Labour for Cement plastering 5mm thick in cement mortar 1:3 on fair faces of concrete ceiling, chajja facia surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge. |
| 112 | Material and Labour for Cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces walls/soffits chajjas/parapet walls etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in- Charge. Note : liquid water proofing compound will be measured and paid separately. |
| 113 | Material and Labour for Cement plastering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge. |
| 114 | Material and Labour for applying acrylic wall care putty on internal surfaces and external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engineer-in- Charge. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint. |
| 115 | M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 2 mm thick wall care putty including complete removal of existing treatment complete all as specified and as directed by Engineer-in- Charge. |
| 116 | M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 2 mm thick wall care putty complete all as specified and as directed by Engineer-in- Charge. |
| 117 | Material and Labour for Preparation of existing surfaces and applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10.00 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including one coat of interior emulsion primer @ 10.00 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 118 | Material and Labour for Preparation of new surfaces of walls and applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10.00 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including one coat of interior emulsion primer @ 10.00 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 119 | M&L for preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in- Charge. |
| 120 | Material and Labour for for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge. |
| 121 | Material and Labour for for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge. |
| 122 | Material and Labour for Preparation of existing surfaces and applying 02 coats of exterior emulsion paint (light shade as approved by GE) with highlighter of any approved shade, @ 5.00 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 123 | Material and Labour for Preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade as approved by GE) with highlighter of any approved shade, @ 5.00 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 124 | Supply & Fixing 16 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed including taking down existing GI tubing complete all as specified and directed by Engineer-in-charge. |
| 125 | Supply & Fixing 20 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed including taking down existing GI tubing complete all as specified and directed by Engr-in-Charge |
| 126 | S & F 1000 ltr capacity rotational moulded polyethene water storage tanks\\"ISI marked\\" trile layered (Cylindrical vertical with closed top) white coloured hoisted and fixed in position including tank nipple and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe etc all as specified and as directed by Engineer -in Charge. |
| 127 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 128 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and as directed by Engineer-in- Charge. |
| 129 | S&F in repair Vitreous China Half stall type urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe,(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) but incl waste coupling complete all as specified and as directed by Engineer-in- Charge. |
| 130 | S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and as directed by Engineer-in- Charge. |
| 131 | S&F in repair PVC low level cistern 10 Ltr cap PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed by Engineer-in- Charge. |
| 132 | S&F vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge. |
| 133 | S&F looking mirror of size 600 x 450 mm, selected quality 5 mm thick including aluminium frame, mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws complete all as specified and as directed by Engineer-in- Charge. |
| 134 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in- Charge. |
| 135 | Demolition of RCC of any description and any position not otherwise specially provided complete all as specified and directed. |
| 136 | M&L Baroda green Marble flooring work 18 to 20 mm thick laid over and including 20mm screed bedding in cement mortar (1:4) (table rubbed and polished) incl steps, stairs, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture complete all as specified and as directed by Engineer-in- Charge. |
| 137 | M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and as directed by Engineer-in- Charge. |
| 138 | M&L Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) as in urinal partition in cement mortar (1:3) 12 mm thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in- Charge. |
| 139 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed by Engineer-in- Charge. |
| 140 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with double rebate of Size 65mm x 125 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 & including taking down of existing shutter complete all specified and directed by Engineer -in-charge. complete all as specified and as directed by Engineer-in- charge. |
| 141 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos SS 150mm long Tower Bolt with and including S&F of 02 Nos SS 150mm long handle and 300 mm SS sliding door bolt complete all as specified and as directed by Engineer-in- Charge. |
| 142 | S&F in repair colour one piece european type combination pattern WC (casket type christinna ) with mounted flushing cistern including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge. |
| 143 | S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed by Engineer-in- Charge. |
| 144 | S&F in repair health foucet Make Jaquar ALD-573 or equivalent with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge. |
| 145 | S&F in repair Health faucet ABS body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed |
| 146 | S&F in repair of high quality looking mirror glass features crystal clear distrotion free reflection fancy type 5 mm to 6 mm thick silver coated layer, corrosion resistant protective backing with smooth,polished beveled edges fixed on wall with fasners area n.exc 2.5 sqm complete all as specified and as directed by Engineer-in- Charge. |
| 147 | Supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.65 m with and including all items and activities required to make sewer line functional complete all as specified and as directed by Engineer-in- Charge. |
| 148 | S&F jointing and testing in trenches DWCPE (SN 8) nominal size 175 (ID)/200(OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.8 m with and including all items and activities required to make sewer line functional complete all as specified and as directed by Engineer-in- Charge. |
| 149 | S&F PFRC ( Area <0.60 sqm) (polymer Fiber reinforced concrete) cover 600 mm diameter having load carrying capacty 20 ton fixed in cement concrete(1:2:4) etc complete all as specified and directed by engr in charge. |
| 150 | Supply & Fixing Factory Made 30mm thick Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01 No. of helical door spring of 300 mm length complete all as specifie and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company 2. The rate of 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item.3 The rate of taking down of existing shutter complete all specified and directed by Engineer -in-charge is included in this item and nothing shall be paid extra on this account.4 The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. |
| 151 | M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of synthetic enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as specified and as directed by Engineer-in- Charge. |
| 152 | Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant. (c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm. (d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat. (e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm. (f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL Tensile Strength 1.5 MPa ASTM D412 Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542 Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305 Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96 Water Absorption < 10% ( by Mass) ASTM D570 Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980. Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE. |
| 153 | S&F in repair Corner glass shelf (set of three) with brass chromium plated bracket fixed to wall complete all as specified and as directed by Engineer-in- Charge. |
| 154 | S & F for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 150 ID mm bore, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions complete including demolition of existing line complete all as specified and as directed by Engineer-in- Charge.(Note - The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc.) |
| 155 | S&F 20-22 mm thick solid PVC board one side prelam sheet colour (Saluca sheet water proof) with suitable cement solvent adhesive for shutter/cup- boards/ partition wall / wall cabinet and similar, including taking down from steel framing and fixed as same complete all as specified and as directed by Engineer-in- Charge. |
| 156 | M&L for providing and fixing false ceiling at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approved texture, design and patterns GI snap grid and hanging arrangment complete all as specified and directions.NOTE : (i) Ceiling tiles shall have moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum). (ii) Ceiling tiles shall be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm incl both sides) comprising of main T-runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, (iii) Grid shall be suspended from ceiling/ roof slab using galvanized mild steel items (Galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. (iv) Perimeter wall angle shall be of galvanised iron of size 24x 24x 0.40mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. (v) GRG false ceiling tiles shall be fully Perforated, 12 mm thick micro tegular edged or 10 mm thick square edged (vi) The work shall be carried out as per Manufactrurer's instructions/specifications, and as per directions of Engineer-in-Charge. |
| 157 | M&L for RCC 1:2:4 type B0 12.5 mm graded stone aggregate as in chajjas, papapet, fins,facia,cupboard shelves etc complete all as specified and as directed by Engineer-in- Charge. |
| 158 | S & F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in- Charge. |
| 159 | M&L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 10 mm thick rendering in cement mortor 1:6 complete all as specified and as directed by Engineer-in- Charge. |
| 160 | M & L 18 to 20 mm thick machine cut Kota stone slab flooring , over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and as directed by Engineer-in- Charge. |
| 161 | S&F Sheet glass, 5mm thick black tinted glass selected quality and glazing with and including rubber beading complete all as specified and as directed by Engineer-in- Charge. |
| 162 | S&F Sheet glass, 5mm thick figured glass selected quality and glazing with and including rubber beading complete all as specified and as directed by Engineer-in- Charge. |
| 163 | S&F rotational moulded HDPE wite colour tripple layer water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, Triple layered white coloured hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms) complete all as specified and directed. |
| 164 | S&F 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and as directed by Engineer-in- Charge. |
| 165 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete all as specified and as directed by Engineer-in- Charge. |
| 166 | M&L for use and waste form work to soffits and sides of chajjas /parapets /cupboard shelves etc. of flat fair finished surfaces of concrete ,etc complete all as specified and as directed by Engineer-in- Charge. |
| 167 | Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator including concealed conduit and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing, complete all as specified and directed by Engineer-in-charge. |
| 168 | Material and labour for concealed point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction boxand connecting to earth dolly and incl new MS Sunken box of thickness 1.22mm and depth not less than 60mm suitable for mounting moduler switch, socket etc. complete all as specified and directed by Engineer-in-charge.Note :-(i) The quoted unit rate is deemed to be inclusive of cost of matel flush boxes, moduler white cover plates, moduler frame plates and flush fixed with cement mortar 1:4 etc. However modular switches/socket/ceiling rose etc shall be measured and paid seprately under respective items of schedule.(ii) Wiring shall be done by using proper colour coding and Earth wire shall be of green colour.(iii) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge. |
| 169 | All as per item No 168 here in before but for socket outlet 5 pin 5 Amp on same board with 1.5 Sqmm cable & including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed by Engineer-in-charge. |
| 170 | All as per item No 168 here in before but for socket outlet 5 pin 5 Amp on Independent board with 1.5 Sqmm cable & including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed by Engineer-in-charge. |
| 171 | All as per ser item No 168 here-in-before but one 3/5 pin socket outlet 15 Amps with 2.5 Sq mm size on independent board all as specified and as directed by Engr-in-charge. |
| 172 | All as per item No 168 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge. |
| 173 | Material and labour for surface point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction boxand connecting to earth dolly and incl new MS Sunken box of thickness 1.22mm and depth not less than 60mm suitable for mounting moduler switch, socket etc. complete all as specified and directed by Engineer-in-charge.Note :-(i) The quoted unit rate is deemed to be inclusive of cost of matel flush boxes, moduler white cover plates, moduler frame plates and flush fixed with cement mortar 1:4 etc. However modular switches/socket/ceiling rose etc shall be measured and paid seprately under respective items of schedule.(ii) Wiring shall be done by using proper colour coding and Earth wire shall be of green colour.(iii) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge. |
| 174 | All as per item No 173 here in before but for socket outlet 5 pin 5 Amp on same board with 1.5 Sqmm cable & including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed by Engineer-in-charge. |
| 175 | All as per item No 173 here in before but for socket outlet 5 pin 5 Amp on Independent board with 1.5 Sqmm cable & including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed by Engineer-in-charge. |
| 176 | All as per ser item No 173 here-in-before but one 3/5 pin socket outlet 15 Amps with 2.5 Sq mm size on independent board all as specified and as directed by Engr-in-charge. |
| 177 | All as per item No 173 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm size complete all as specified and as directed by Engineer-in- Charge. |
| 178 | Supply and fixing modular switch, 6Amps, one module, 250 volts, one way, complete all as specified and as directed by Engineer-in-charge. |
| 179 | Supply and fixing modular socket outlet multipurpose, 3/5pin, 6Amps, two module 250 volts, complete all as specified and as directed by Engineer-in-charge. |
| 180 | Supply and fixing modular switch, 1 way, one module, 16Amps, 250 volts complete all as specified and as directed by Engineer-in-charge. |
| 181 | Supply and fixing modular socket outlet multipurpose, 2 in 1, 6pin, 6/16Amps, two module, 250 volts, complete all as specified and as directed by Engineer-in-charge. |
| 182 | Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, 250 volts incl LED bulb 9/10 Watts, B-22 type, 100/110 lum/watts taking down old unserviceable complete all as specified and as directed by Engineer-in-charge. |
| 183 | Supply and fixing ceiling rose surface type polycarbonate isolated body two to three terminal, topline series 20x50mm, 6 Amp, 250 volts, complete all as specified and as directed by Engineer-in-charge. |
| 184 | Supply and fixing (Concealed in wall) single pole and neutral sheet metal enclosure (AC Box) with a two pin and earth plug and socket (metal clad) complete including one single pole MCB of capacity 20 Amps, 240 volts, AC supply complete all as specified and as directed by Engineer-in-charge. |
| 185 | S&F wall mounted LED batten fitting 1x20 watt, 6000K, min 100-110 lumen per watt, 4 ft inverter type backup up to 4 hrs continously complete with Decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate, enviroment friendly, energy efficient complete with all light fittings connections all as specified and as directed by Engr-in-charge. Note :-(i) Contractor has to furnish a replacement warranty of 01 years for LED light fittings complete including from the certifiy date of completion of CA.(ii) The product will be replaced free of cost in the following case :-(a) Manufacturing defects.(b) Failure due to mechanical and electrical impact. |
| 186 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 6000K, min 100-110 lumen per watt, 220 V AC decorative inverter type backup up to 4 hrs continously with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.Note :- (i) Contractor has to furnish a replacement warranty of 01 years for LED light fittings complete including from the certifiy date of completion of CA.(ii) The product will be replaced free of cost in the following case :-(a) Manufacturing defects.(b) Failure due to mechanical and electrical impact. |
| 187 | S&F in replacement of Distribution Board (TPN) 4 way double door suitable for MCB 100 Amp four pole as incomer and out going MCBs and should be IP- 54 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCCB/MCBs any type complete all as specified and directed by Engineer-in-charge.Note :- (i) All wires/cable connections in distribution boards will be made using copper lugs/ thimbels of suitable size with the help of crimping tool. |
| 188 | S&F in replacement of Vertical Distribution Board (VTPN) 4 way double door suitable for MCCB 125 Amp four pole as incomer and out going MCBs and should be IP- 54 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCCB/MCBs any type complete all as specified and directed by Engineer-in-charge.Note :- (i) All wires/cable connections in distribution boards will be made using copper lugs/thimbels of suitable size with the help of crimping tool. |
| 189 | Supplying and fixing Sheet metal enclousers made out of CRCA mild steel sheet , IP-54 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated copper bus bar, Double Door, 12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed by Engineer-in-charge. Note :- (i) All wires/cable connections in distribution boards will be made using copper lugs/thimbels of suitable size with the help of crimping tool. |
| 190 | S&F RCBO 2 pole 100 mA, 40 to 63 Amps 240 Volt incl necessary accessories complete all as specified and as directed by Engr-in-charge. |
| 191 | Supplying and fixing MCB SP suitable for 230 volts AC supply 5 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module complete all as specified and directed by Engineer-in-charge. |
| 192 | S&F in repair MCB Single Pole 40 Amp, B Curve suitable for 240 volt, 10 KA complete including taking down old unserviceable MCB SP all as specified and directed. |
| 193 | S&F in repair MCB single pole 5-32 Amp C curve suitable for 240 volt, 10 KA complete including taking down old unserviceable MCB SP complete all as specified and as directed by Engineer-in- Charge. |
| 194 | Supply and fix Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed by Engineer-in-charge.Note :-(i) Fixing of 4 Nos rawl plug of suitable size (4\\"-6\\") nuts & bolts, grouting work in RCC/ Brick wall, cemented works for hanging of electric water heater incl in the unit rate and nothing shall be paid extra on this account.(ii) Cutting to exisiting GI pipe line of size 15 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement incl in the unit rate and nothing shall be paid extra on this account.(iii) Serial Number as issued by Engineer-in-Charge and GE(N) BTD shall also be written on Electric water heater with red colour permanent marker / paint (neat & clearly visible), cost for the same deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 195 | Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge. |
| 196 | Supply and fix Exhaust fan steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm incl making hole in wall of size 300mm and making good distrubed surfaces of wall to match with the existing complete all as specified and directed by Engineer-in-charge.Note :-(i) Fixing of 4 Nos rawl plug of suitable size (4\\"-6\\") nuts & bolts, grouting work in RCC/ Brick wall, cemented works for hanging of exhaust fan incl in the unit rate and nothing shall be paid extra on this account.(ii) Cutting hole of suitable size in new/exisiting RCC/ Brick wall and cemented works incl in the unit rate and nothing shall be paid extra on this account.(iii) Serial Number as issued by Engineer-in-Charge and GE(N) BTD shall also be written on Exhaust Fan with red colour permanent marker / paint (neat & clearly visible), cost for the same deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 197 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including taking down old unserviceable exhaust fan of any type complete all as specified and directed by Engineer-in-charge.Note :- (i) Fixing of 4 Nos rawl plug of suitable size (4\\"-6\\") nuts & bolts, grouting work in RCC/ Brick wall, cemented works for hanging of exhaust fan incl in the unit rate and nothing shall be paid extra on this account.(ii) Cutting hole of suitable size in new/exisiting RCC/ Brick wall and cemented works incl in the unit rate and nothing shall be paid extra on this account.(iii) Serial Number as issued by Engineer-in-Charge and GE(N) BTD shall also be written on Exhaust Fan with red colour permanent marker / paint (neat & clearly visible), cost for the same deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) Old unserviceable Exhaust Fan will be deposited to Garrison Engineer (N) store yard in AGE E/M -V cost for the same deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 198 | M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 4 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note :- (i) Wiring shall be done in proper colour coding and Earth wire shall be of green colour.(ii) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge. |
| 199 | Material and labour for concealed Sub main wiring complete with two single core 06 Sqmm,1100 volts grade, PVC insulated, multi-stranded copper conductor cable FRLSH with continuous copper earth conductor of 06 sqmm including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories complete all as specified and directed by Engineer-in-charge. Note :- (i) Wiring shall be done in proper colour coding and Earth wire shall be of green colour.(ii) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge. |
| 200 | Supply and fixing LED street light fitting 1x25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with suitable for direct mounting on pipe bracket, fixing on wall with and including brackets made out of GI tubing lightwith suitable bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing with MS clamp (02 Nos) and nut bolts, including before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer, all as specified and as directed by Engr-in-charge. Note :-(i) Contractor has to furnish a replacement warranty of 01 years for LED light fittings complete including from the certifiy date of completion of CA.(ii) The product will be replaced free of cost in the following case :-(a) Manufacturing defects.(b) Failure due to mechanical and electrical impact. |
| 201 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 2 core complete all as specified and as directed by Engineer-in- Charge. |
| 202 | Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed by Engineer-in- Charge. (Note:- Punned thickness shall be considered for payment purpose) |
| 203 | Supplying and laying factory made ISI mark reinforced precast concrete cable cover, LV class, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and as directed by Engineer-in- charge. |
| 204 | S&L GI tubing light graded incl all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/sockets/ reducers/ saddles incl necessary threading/drilling works all as specified and directed of sizes 40 mm |
| 205 | Supplying and fixing MCB TPN 100 Amps, 10 KA 'C' curve 415 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB TPN, complete all as specified and directed by Engineer-in-Charge. |
| 206 | Supplying and fixing MCB SPN 40 to 63 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN, complete all as specified and directed by Engineer-in-Charge. |
| 207 | Supplying and fixing MCB SP suitable for 230 volts AC supply 5 to 32 Amps, SP rupturing capacity not less than 10KA, 'B' Curve ISI Marked, 1 Module complete all as specified and directed by Engineer-in-charge. |
| 208 | Supply and fixing Ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engineer-in-charge.Note :- (i) Serial Number as issued by Engineer-in-Charge and GE(N) BTD shall also be written on Ceiling Fan with red colour permanent marker / paint (neat & clearly visible), cost for the same deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (ii) Old unserviceable Ceiling Fan will be deposited to Garrison Engineer (N) store yard in AGE E/M -V cost for the same deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 209 | Supply and fixing Modular bell push, 6 Amps, 1 way, two module, 250 volts complete all as specified and as directed by Engineer-in-charge. |
| 210 | Supply and fixing Electric calling Bell, Ding Dong type, AC 230 Volts single pole complete all as specified and as directed by Engineer-in-charge. |
| 211 | Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 70 Sqmm 3.5 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. |
| 212 | Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 25 Sqmm 2 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. |
| 213 | Supplying and laying common burnt clay building Bricks sub-class 'B' using for cable protection complete all as specified and as directed by Engineer-in- charge. |
| 214 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washersand including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil , returning filling and disposal of surplus soil to a distance not exceeding 50m, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender