Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58329056

Tender For Provn Of Hard Standing Concrete Garage & Squash Court And Storage Accn And Engr Equipment Repair Shop And Carpender Shop Against (Job No 81 Sa/Btd/Lbw-18/2025-26, 81 Sa/Btd/Lbw-23/2025-26 & 81 Sa/Btd/Lbw-15/2025-26) At Bathinda Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Bathinda, Punjab
Tender Value
1.24 Crore
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Hard Standing Concrete Garage & Squash Court And Storage Accn And Engr Equipment Repair Shop And Carpender Shop Against (Job No 81 Sa/Btd/Lbw-18/2025-26, 81 Sa/Btd/Lbw-23/2025-26 & 81 Sa/Btd/Lbw-15/2025-26) At Bathinda Mil Stn

BOQ

Name of Work:- PROVN OF HARD STANDING CONCRETE GARAGE & SQUASH COURT AND STORAGE ACCN AND ENGR EQUIPMENT REPAIR SHOP AND CARPENDER SHOP AGAINST (JOB NO 81 SA/BTD/LBW-18/2025-26, 81 SA/BTD/LBW-23/2025-26 & 81 SA/BTD/LBW-15/2025-26) AT BATHINDA MIL STN
Sl. No. Item Description
1Note:-Please refer schedule 'A' notes before quoting the tender.
2GENERAL SUMMARY
3Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately)
4Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)
5Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)
6Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)
7Lump sum price worked out by the contractor for ROAD ,PATH , HARDSTANDING AND CULVERT WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)
8Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)
9Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-VII (Ref prepriced schedule attached seperately)
10SCH 'A' Pt -VIII (MISCELLANEOUS ITEMS) (Contains Ser item No 3.01 to Ser item No 4.02)
11INTERNAL ELETRIFICATION NOTE:- For items of internal Electrifications notes given at the beginning of Sch ‘A’ Part-III (internal Electrification) shall also be applicable.
12Supply and fixing wall mounted extrdued aluminium housing LED betten fixture with tube 1.2 m, 20 watt Inverter type, 1.2 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete including making connection complete all as specified and as directed by Engineer-in- charge.
13Supply and fixing wall mounted extrdued aluminium housing LED betten fixture with tube 0.6 m, 10 watt Inverter type, 0.6 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete including making connection complete all as specified and as directed by Engineer-in- charge.
14Supply and install HI wall split units indoor/outdoor complete with cordless remote control unit and with in built ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR complete including all accessories required for installations complete all as specified and as directed by Engineer-in- charge.
15EXTERNAL ELETRIC SUPPLY NOTE:- For items of EXTERNAL ELECTRIC SUPPLY notes given at the beginning of Sch ‘A’ Part-V ( EXTERNAL ELETRIC SUPPLY ) shall also be applicable.
16Material and labour High density polythene double wall corrugated pipe of 40 mm inner dia for underground cable protection, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts complete all as specified and directed by Engineer-in-charge
17Supply, installation, commisioning and testing of company made (CPRI) approved) LT Panel (for Abdul Hamid) outdoor type of suitable size, made out of 3.15 mm thick CRCA sheet duly compartmentalized inside panel with 2 mm thick CRCA sheet for fixing of MCCB & instrumentations compartments and frame etc. to accomodate the incoming and outgoing MCCBs/COs/Motor Starter duly powder coated (The inner/outdoor shell will have powder coated siemens grey) and having provision for front and rear side opening with rubber beading and mild steel cable glands for each cable to make it weather and vermin proof double door hinged type, both side openable, air fins for ventilation, The panel shall be placed on angle iron of size 50 x 50 x6 mm frame supported on 04 legs 700 mm long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 angle frame shall be provided with mild steel sheet 300 mm width and 1.6 mm thick on three sides duly fixed with nuts and bolts complete all as specified and directed. Panel shall comprise of the following :-INCOMINGMCCB 160 Amp mircroprocessor release type Four Pole, Breaking capacity 36 KA, ICA=100% of ICU, adjustable overload setting from 0.4 to 1.0 x in, Adjustable short circuit setting from 1.5 to 8 xlr with OC.SC and EF protection - 01 No.Bus bars of aluminium strips of 300 Amp current rating capacity Multifuncation Meter Digital type showing V, A, F, Pf Kw, KWH in built selector switch with CT coils for three phase - 01 No. with RYB indicator & on/off/trip MCB 6 A, SP, 10 KA C Curve - 07 NosOUTGOINGMCCB 4 Pole, 63 Amps, 415 volt of breaking capacity 16 KA (Ics = 100 % Icu) with Adjustable Thermal and fixed Magnetic Type 04 NosIndicator lamp (R,Y,B) - 04 Set. Phase indication lamp ON/OFF/TripMCB 6 A, SP, 10 KA C Curve - 12 NosMultifunction Meter Digital type showing V, A, F in built Selector switch owth CT coils for three phase - 04 Nos Note:- All outgoing feeder shall be connected with suitable size of bus barNote :- Old unserviceable material should be deposited to the MES E/M store by the contractor by his own arrangements without any financial benefits including dismantling of old unserviceable LT Panel complete all as specified by Engineer in Charge and GE Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58329056
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.24 Crore
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Hard Standing Concrete Garage & Squash Court And Storage Accn And Engr Equipment Repair Shop And Carpender Shop Against (Job No 81 Sa/Btd/Lbw-18/2025-26, 81 Sa/Btd/Lbw-23/2025-26 & 81 Sa/Btd/Lbw-15/2025-26) At Bathinda Mil Stn
Basic Detail
Tender No CWE BTD/TOKEN-20/2026-27
Bidding Type Tender
Location
City Bathinda
State Punjab
Key Dates
Publish Date 02 Nov 2026
Submission Date 07 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 1.24 Crore
Tender Fee 1000
EMD 2 Lakhs
Exemption Available
Document List
8120DRAWINGS.rar
8120Tender.pdf
b48f5a1e-83be-4f5f-95f5-1f14f12b0c12.html
BOQ_893834.xls
DRAWINGS8120.rar
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
rar

8120DRAWINGS.rar

pdf

8120Tender.pdf

html

b48f5a1e-83be-4f5f-95f5-1f14f12b0c12.html

xls

BOQ_893834.xls

rar

DRAWINGS8120.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender