Tender For Repair And Replacement Of Road Furniture And Connected Works Under Age B&R-Ii Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
49.70 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
14 days left
EMD
99400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement Of Road Furniture And Connected Works Under Age B&R-Ii Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old concrete surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over priming coat complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 3 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 4 | Supply and fixing in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 5 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 6 | Providing and fixing in repair solar powered road delineator with LED flasher arrangement, complete, comprising UV-stabilized, weather-resistant and impact-resistant HDPE/ABS/polycarbonate delineator post of approved shape, size and colour, having high-intensity retro-reflective sheeting/reflectors on both sides, integrated solar photovoltaic panel of suitable capacity, rechargeable maintenance-free battery, automatic dusk-to-dawn light sensor/controller, high-intensity LED/flasher unit with amber/yellow/red indication as approved, suitable flashing circuit, ON/OFF/automatic control arrangement, battery compartment and all necessary internal wiring, terminals, connectors, mounting/fixing accessories, GI/MS support/post/base plate, anchor fasteners and other accessories required for complete installation. Solar panel shall charge the battery during daylight and LED flasher shall operate automatically during low-light/night conditions. The unit shall be suitable for outdoor road-side installation, resistant to rain, dust, UV radiation and normal impact/vibration, and shall provide clear visibility to approaching traffic. Including transportation, handling, installation, fixing, testing and commissioning complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 7 | Providing and fixing including taking down old of prefabricated/modular speed breaker / rumble strip of approved make and suitable size, manufactured from high-strength, weather-resistant rubber/EPDM/recycled polymer material, including necessary surface preparation, cleaning and leveling of road surface, positioning and alignment, drilling of holes, fixing with suitable heavy-duty anchor fasteners /bolts, nuts, washers and other required accessories, including reflective yellow/white markings or high-visibility reflective inserts as applicable, complete with all materials, labour, tools, tackles, transportation, installation and making good the surface, complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 8 | Providing and fixing including taking do`wn old of convex traffic safety mirror Approx. 800 mm dia of approved make, manufactured from high-quality weather-resistant acrylic/polycarbonate reflective material with UV-resistant coating, suitable for outdoor traffic and road safety applications, of required diameter/size, including heavy-duty protective back housing/frame, mounting bracket, adjustable MS/GI mounting arrangement and necessary clamps, nuts, bolts, washers and other fixing accessories; including providing and fixing on suitable GI/MS post or existing structure at the required height and location, alignment and adjustment of mirror for optimum visibility, necessary excavation and PCC/concrete foundation for the post wherever required, painting/anti-corrosive treatment of metallic components, complete with all materials, labour, tools, tackles, transportation, installation and making good the affected surface, complete in all respects as specified and as directed by the Engineer-in-Charge |
| 9 | Providing and fixing solar powered traffic warning signal light comprising single high-intensity LED yellow/amber signal lamp, continuously blinking/flashing automatically, complete with suitable solar photovoltaic panel, rechargeable maintenance-free battery, electronic charge controller, automatic dusk-to-dawn light sensor, flasher/control circuit, weatherproof lamp housing and visor, suitable GI/MS powder-coated pole/bracket/support arrangement of required height, base plate, foundation/anchor fasteners, clamps, nuts, bolts and all necessary electrical wiring, connectors and accessories. Solar panel shall be suitably sized for charging the battery and the system shall be capable of automatic operation during night/low-light conditions, with amber/yellow LED flashing continuously at suitable frequency. The complete assembly shall be weatherproof, UV-resistant and suitable for outdoor traffic/roadside installation. Including transportation, loading/unloading, erection, fixing, testing and commissioning complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 10 | Demoltion of cement concrete any type and in any position (un-reinforced) in ground floors, paving and as in kerbs not exc 15cm thickness (below or above ground level) complete all as specified & directed. |
| 11 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including dismantling of existing kerb stone and making drainage opening wherever required complete. |
| 12 | M&L for preparation of new concrete surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over priming coat complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Fixing only cement concrete paver block as in footpath,parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note: Old Cement Concrete Paver Blocks of any type and size retrived from dismantling shall be reused under this item. |
| 14 | M&L PCC (1:4:8) type D2 using 40 mm graded stone aggregrate infoot path /walk way surfaces finished even & fair without using extracement complete all as specified and directed. |
| 15 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender