Tender For Repair And Maintenance Of Drinking Water Ugr, Fire Fighting Ugr, Booster Pumps, Pump Houses And Allied Works For Various Non Residential Buildings At Sector 17 Chandigarh(Ch To: 2215 (N.P.) Nrb )
Tender Value
5.71 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
5 days left
EMD
11428
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Drinking Water Ugr, Fire Fighting Ugr, Booster Pumps, Pump Houses And Allied Works For Various Non Residential Buildings At Sector 17 Chandigarh(Ch To: 2215 (N.P.) Nrb )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. DSR 2.6 |
| 2 | All kinds of soil DSR 2.6.1 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.3 |
| 5 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 7 | Suspended floors, roofs, landings, balconies and access Platform |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 9 | Cold twisted bars |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class esignation 7.5 in foundation and plinth in |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4.1 |
| 13 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 |
| 15 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 |
| 16 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 10.25.2 |
| 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. DSR 11.37 |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR 12.50 |
| 19 | 12 mm cement plaster finished with a floating coat of neat cement of mix |
| 20 | 1:3 (1 cement: 3 fine sand) |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : DSR 13.41 |
| 23 | New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 13.41.1 |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : DSR 13.61 |
| 25 | Two or more coats on new work DSR 13.61.1 |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 27 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap DSR 17.7.4 |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 29 | 15 mm dia nominal bore |
| 30 | 20 mm dia. nominal bore |
| 31 | 50 mm dia. nominal Bore |
| 32 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 33 | 20 mm nominal bore |
| 34 | 50mm nominal bore |
| 35 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 36 | 20.0 mm nominal bore |
| 37 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) DSR 18.31 |
| 38 | 100mm diameter DSR 18.31.1 |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 40 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 41 | 15 mm nominal bore DSR 18.49.1 |
| 42 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 43 | 15mm nominal bore DSR 18.53.1 |
| 44 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. DSR 18.74 |
| 45 | 15 mm nominal bore with 30cm length DSR 18.74.1 |
| 46 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4 |
| 47 | 100x100 mm size P type DSR 19.4.1 |
| 48 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 49 | Providing & fixing IRC encloser jali of mesh size 32 mm x 32 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC |
| 50 | Supplying & Fixing of Water Purifier with 3 Stage Purification system consisting of sediment filter, Activated Carbon Filter and Ultravoilet treatment having purification capacity of 200 LPH, water control sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete of make Kent or equivalent to the satisfaction of EIC |
| 51 | Repair and Rewinding of Submersible Motor including repair / replacement of various parts such as housing bush, rotor sleeve, sand graud, flange lock, sub cable, thrust bearing, thurst plate, motor bush, seal bush, connection piece and Repair of Sub. Pump ( 6\\" to 8\\" dia) including repair / replacement of various parts such as bowl bush, neck ring, pump shaft impeller, NRV, coupling with a guarantee of 6 months to Repair / Replacement of Defective parts. |
| 52 | 7.5 HP to 10 HP |
| 53 | Replacement of Kit Kat of make ASCO or equivalent of following capacity to the satisfaction of EIC |
| 54 | 200 Amp |
| 55 | Lowering, Lifting of submersible pump/motor complete in all respects |
| 56 | Providing and fixing of flat Submersible cable of IS-694 marked of approved make complete in all respect |
| 57 | 10sqmm |
| 58 | 16sqmm |
| 59 | Providing and fixing of Copper thimble complete in all respect |
| 60 | 25mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender