Tender For Maintenance Of Various E&M Services At Thyagraj Sports Complex, New Delhi. (Sh: Repairing Of Old Aluminium Tilt Tower Ladders Of Distinguished Heights And Size Etc).
Tender Value
4.96 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
6 days left
EMD
9937
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Various E&M Services At Thyagraj Sports Complex, New Delhi. (Sh: Repairing Of Old Aluminium Tilt Tower Ladders Of Distinguished Heights And Size Etc).
BOQ
| Sl. No. | Item Description |
| 1 | Repairing/replacement and servicing of stool aluminium Ladders, wall supporting- 3 Nos. (20 Ft. height, 10 Ft. height & 6 Ft. height) |
| 2 | SITC of Rubber shoes fixed at bottom of the ladder. |
| 3 | SITC of Platform for ladder at top of ladder size 16” x 12”. |
| 4 | SITC of platform rubber mat fixed at top of ladder |
| 5 | SITC of scissors clamp (small) |
| 6 | SITC of scissor clamp (big ). |
| 7 | SITC of step 25mm dia pipe (minimum 16” long). |
| 8 | SITC of flat step 2.5” flat(16”long) |
| 9 | Painting of aluminum ladders of various size as above. |
| 10 | SITC of steps rubber plug |
| 11 | Providing the mechanical devices and new gear box with handle of 1mtr for operational moment of existing rolling shutter of height 3mtr i/c overhauling greasing, oiling & vertical travle of M.S rolling shutter etc complete as reqd.(Dismental material shall be return to the contractor) |
| 12 | Sterlization of existing cable trench of size of width-0.80 mtr & minimum depth of 0.90 mtrs. by lifting bolders, domestic waste, soil, bricks dabris & garbage etc, by using man power cable trench, without disturbing the connection of cables and shifting the lifted malwa etc complete as reqd at site. |
| 13 | Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade : |
| 14 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 15 | Disposal of cable trench rubbish/ malba/ similar unserviceable dismantled or waste materials means, old sand from basement i/c loading transporting, uploading of approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mtr. Initial lead for all leads i/c all lifts involved. |
| 16 | Supplying , fixing and welding MS angle of 40mm X 40mm X 5mm (NS) on the trench, other foundation, fixing by pin fashner of size 10mmx125mm thickness i/c primer of approved make etc. complete as required. |
| 17 | Fabrication, supplying,& fixing of trench covers of 6mm thick M.S checkered sheet, 25mm x 25mm x 3mm M.S angle iron in Z shaped) i/c cutting adges, grinding and painting with enamel black colored paint providing red oxide primer & etc complete as reqd at site. |
| 18 | Supplying fixing of handle of size 5”x2” made of ½” dia M.S road for opening and closing the existing sheet cover drilling holes, welding and painting etc. complete as reqd at site.(Dismantle material shall be return to the contractor) |
| 19 | Repairing/replacement and servicing of old tilt tower ladder (with additional winch gear (2 nos). |
| 20 | Repairing of platform covered three sides by 20 swg ms sheet and ms angle 25mm x 25mm x 3mm etc complete. |
| 21 | SITC Rubber mat for tower ladder 24”x24”x6 mm thickness. |
| 22 | Tower ladder washing, oiling, servicing painting, assembling etc. complete. |
| 23 | SITC wheel bearing type 12”x3” heavy duty . |
| 24 | SITC Steel wire rope lock 8mm dia(heavy duty) |
| 25 | Steps rubber plug,nut bolt with washer,tightening of steps by die and hammer etc complete. |
| 26 | Repairing of gear box such as big gear and small gear , soft bearing, quators pins. Bearing plates , handle etc. |
| 27 | SITC Sections support MS angle size 32mmx32mmx3mm thickness for tower support. |
| 28 | Repairing of moving type handle for tower ladder. |
| 29 | SITC steel wire rope 8mm dia (heavy duty) |
| 30 | SITC Pin with chain fixed at bottom of tower ladder. |
| 31 | SITC break system in wheel for tower ladder. |
| 32 | Applying Aluminium section grip from bottom to top side ,made out of M.S angle of size 40x40x6mm thickness, fixing the aluminium section with the help of nut bolts heavy duty. Etc as required. |
| 33 | Wheel guard U type 12”-14” |
| 34 | wheel excel with nut bolt & washer 8” long 2.5”dia |
| 35 | Credit buy back old dismantle |
| 36 | Rusted MS angle, MS Sheet, old wheels, steel wire, MS pipe etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender