Tender For Supplying, Installation, Testing & Commissioning Along With Repair Works Of Electrical Accessories At Subhas Sarobar Park.
Tender Value
38.74 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
9 days left
EMD
77491
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying, Installation, Testing & Commissioning Along With Repair Works Of Electrical Accessories At Subhas Sarobar Park.
BOQ
| Sl. No. | Item Description |
| 1 | Removing of luminaries with lamp from the pole/column and keeping them ready for dispatch as per direction of EIC:HPMV/HPSV luminaries/MH/LED street light fittings. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.In ground floor including roof.(a) upto 150 mm. thick |
| 3 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per elevant IS codes.(a) Pakur Variety |
| 4 | Supply and Fixing of LED Bollard (10 W) complete with all accessories , make - Havells. |
| 5 | Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimensions 410-SP-30 ; 9.0mtrs: 133 Kg |
| 6 | Supply of single arm bracket made of 40 mm dia 1.5 meter long |
| 7 | Supply of double arm bracket made of 40 mm dia 1.5 meter long |
| 8 | Erection of Single Steel tubular pole of length as given belowwith/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thickCC (4:2:1) base block below sole plate/pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts.above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly |
| 9 | a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts |
| 10 | Supplying & Fixing GI waterproof type looping cable box size200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, onecompression type brass cable gland for upto 2- core 16 sqmmPVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint |
| 11 | Supplying and delivery of 70 Watt LED street light with pressure die cast aluminum housing, IP66 protection, road way luminarie with high power LED as per the detail technical proposal specification & vendor list attached. |
| 12 | Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). as per direction of EIC. |
| 13 | a) 70 watt |
| 14 | Supplying and delivery of 200 Watt LED Flood light with pressure die cast aluminum housing, IP66 protection, road way luminarte with high power LED as per the detail technical proposal specification & vendor list attached. |
| 15 | Supplying, Installation, Testing & Commissioning 300 mm round Polycarbonet Milky Globe with E27 base Holder with globe Base Black colour Complete set, as per direction of EIC. |
| 16 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. (Rate in Rs. Per Mtr) |
| 17 | a) 3 core X 10 sq mm |
| 18 | b) 4 core X 16 sq mm |
| 19 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. |
| 20 | Laying only Cable upto 50 sqmm through existing RCC/Hume GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core |
| 21 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages andpainting. |
| 22 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of armoured cables as below : For 3 core upto 10 sqmm. |
| 23 | a) For 3 core upto 10 sqmm |
| 24 | b) For 4 core upto 16 sqmm |
| 25 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : |
| 26 | a) 3 core 10 sqmm cable |
| 27 | b) 4 core 16 sqmm cable |
| 28 | Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre laid polythene pipe and by the prelaid GI fish wire and making necy. connection as required |
| 29 | a) 3 x 22/0.3 (1.5 sqmm) |
| 30 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment4 way, make-Legrand. |
| 31 | Supplying and fixing double-door SPN MCB DistributionBoard with IP-42/43 protection, concealed in wall aftercutting the wall & mending good the damages tooriginal finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthingattachment. 2+4 way. make-Legrand. |
| 32 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. |
| 33 | a) DP, 40 A, Make- Legrand |
| 34 | b) FP, 63 A, make-Legrand. |
| 35 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection, make-Legrand. |
| 36 | a) SP, 6-32 A |
| 37 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish |
| 38 | a) Average run 9 mtr |
| 39 | b) Average run 12 mtr |
| 40 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish |
| 41 | a) On Board |
| 42 | b) Average run 6 mtr |
| 43 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC ulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required |
| 44 | a) 2 x1.5 sqmm + 11.5 sqmm ECC |
| 45 | b) 2 x 2.5 sqmm + 1 x 1.5 sqmm ECC |
| 46 | c) 2 x 4 sqmm + 1 x 2.5 sqmm ECC |
| 47 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 48 | a) 2.5sqmm |
| 49 | b) 4 sqmm |
| 50 | Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 51 | Supply & Fixing 240 V, 4 nos. 20A plug socket with separate4 nos. 20A Piano key type switch, indicator & 20A switch typeSP MCB (approved make) on sheet metal switch boardembedded in wall incl. S & F 300x200x65mm MS (16SWG)switch board and bakelite/perspex top cover of 3mm thick byBrass screws after making housing for switch by cuttingbakelite/perspex cover and making necessary connections asrequired |
| 52 | Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 53 | Supplying of approved make high speed ceiling fan (ISI marked) of following sizes having double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts,1200mm |
| 54 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 55 | Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 225mm sweep RPM 900/1400 (9\\") |
| 56 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire andmaking connection for exhaust of following diameter:23 cm (9\\") |
| 57 | Supply TMC501 Conventional industrial batten Philips LEDtube, model no: TMC 501 P 1xT-LED 22W P3241 with 1no Mas LEDtube 1200mm 18W865 T8 I-2100lm including necessary connection. |
| 58 | Fixing only single/twin fluorescent light fitting complete with allaccessories directly on wall/ceiling by screws etc. |
| 59 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled withbitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the groundlevel as below: (a) By ISI-Medium GI pipe. |
| 60 | Earthing with one 15.88 mm dia GI rod with double GI nuts and washers and 4 SWG GI wire to an average depth of 3 mtr including S/F 15 mm dia GI pipe protection (1 mtr long). a) with 1.8 mtr long earth spike as per direction of EIC. |
| 61 | Connecting the equipments to earth busbar including S & F GI(Hot Dip) wire of size as below on wall/floor with staples buriedinside wall/floor as required and making connection toequipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages |
| 62 | a) Solid GI wire No. 4 SWG |
| 63 | Supply & delivery of 10 HP, 415 V, 50 Hz,3 Ph.AC Fully AutomaticStar Delta Starter of Continuous duty in sheet steel enclosure, Type - MU-G15 FASD ( With wideband coil)[HSN Code- 8536] (make:L&T/ABB/SCHNEIDER): |
| 64 | Fixing only starters (for motor control) on angle iron frame on wall. Star-Delta starter for motor (above 5 HP upto 15 HP) |
| 65 | Add CESS @ 1% |
| 66 | Add GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender