Tender For Special Repairs To Water Supply, Sanitary And Door Arrangements At Staff Toilet And Seating Arrangements In Rdo Office At Sankarankovil In Tenkasi District.
Tender Value
3.40 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
9 days left
EMD
3400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Water Supply, Sanitary And Door Arrangements At Staff Toilet And Seating Arrangements In Rdo Office At Sankarankovil In Tenkasi District.
BOQ
| Sl. No. | Item Description |
| 1 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4\\" x 4-1/4\\" x 2-1/4\\" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 2 | Ground Floor |
| 3 | First Floor |
| 4 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 6 | Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work. |
| 7 | Stainless Steel 3 in 1 perforated chair of size 75 x 40 x 1800MM (NSTSCHR 1650): Stainless Steel Sheet 18 G GR,304 perforated seat and back, MS rectangular base support powder coated 60 microns finish of Size 75 x 40 x 1800 mm 1.25 mm Stainless steel sheet GR: 304 for ARM and LEG with Heavy type SS Bolt and Nut finish |
| 8 | Steel rack (open type) of size: 75\\" x 33\\" x 18\\" (TSRCK001R): Made out of 18 G CR sheets, 37 x 37 x 3 mm MS. Anglehaving 6 fixed shelves forming 5 compartments with onecoat of red oxide and two coat of olive green enamel paint finish |
| 9 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers. 20/30mm thick |
| 10 | Supplying, laying and jointing CPVC pipes OF Standard Dimension Ratio 11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works). - External water supply - above ground level. |
| 11 | Above Ground Level 25mm dia |
| 12 | Supplying CPVC specials of SDR 11 conforming to IS 17546-2021 in water supply arrangements (both in internal and external water supply arrangements |
| 13 | CPVC Bend 25mm dia |
| 14 | CPVC Union 25mm dia |
| 15 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender