Tender For Repairs To Road Side Shoulders / Berms And Bituminous Surface For Md Accn Under Aor Of Age B/R-I Of Ge (West) Agra
Tender Value
33.99 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Road Side Shoulders / Berms And Bituminous Surface For Md Accn Under Aor Of Age B/R-I Of Ge (West) Agra
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing black-top surfaces by brushing with wire brushes to remove caked mud, sweeping with brooms, and cleaning the surface with air blower/power compressor through air jet to remove all loose dirt, dust and other foreign matter, complete all as specified and directed |
| 2 | M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over prepared black top surfaces by mechanical sprayer operated on hot pressure mechanism complete all as specified and as directed |
| 3 | M&L for providing, laying, spreading bituminous premix Semi-Dense Asphaltic Concrete (SDAC) (design mix), 30 mm consolidated thickness, with 5.5% binder content by weight of the total mix, using paving bitumen VG-30, laid with self-propelled mechanical paver, and rolled and compacted with 8 to 10 tonne capacity power road roller to the required camber and gradient, complete all as specified and directed.Note :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver.(ii) The contractor shall quote the rate based on the binder content specified above. If the actual binder content used is found to be less than the specified binder content, the contract rate shall be reduced proportionately for the shortfall in binder content. However, no extra payment or price adjustment shall be admissible if the actual binder content exceeds the specified binder content.(iii) Job mix formula (Design mix) of SDAC shall be approved by GE. |
| 4 | M&L for repairing potholes of any shape, not exceeding 1 sqm each and not exceeding 30 mm in depth, including sweeping the surface free from dust, mud and water, scoring the sunken surface, cutting the edges to a minimum depth of 25 mm, applying tack coat with paving bitumen (VG-10) at the rate of 5 kg per 10 sqm, filling with premixed bituminous macadam, with 4% of paving bitumen of grade VG-30 by weight of total mix, compacting by ramming, sealing with binder at the rate of 9.8 kg per 10 sqm, blinding with 6.3 mm size stone chippings at the rate of 0.09 cum per 10 sqm, and finally ramming/compacting to a true and even surface, including supply of screened and graded road metal, premixed bituminous macadam, binder and stone chippings, complete all as specified and directed. |
| 5 | M&L for preparing road surfaces and applying thermoplastic reflective road marking, 2.5 mm minimum thickness in a single coat, as centre line, edge line or other road markings of 100 mm/150 mm width, using hot-applied thermoplastic reflective paint of approved make, in white or yellow colour, applied by self-propelled thermoplastic road marking machine, including premixing and application of all constituents such as binder, titanium dioxide, glass beads, calcium carbonate, fillers and additives, with glass beads conforming to BS 6088 and MoRTH Specifications, including surface preparation, application and simultaneous spraying of glass beads, complete in accordance with the manufacturer's instructions, complete all as specified and directed |
| 6 | M&L for providing and laying thermoplastic rumble strips, 300 mm wide, on roads to form a series of raised, vibrating strips at regular intervals, using specialised thermoplastic application machinery for extrusion of hot thermoplastic material onto the road surface, including surface preparation, heating and melting of thermoplastic material, application at the specified thickness and spacing, application of glass beads for retro-reflectivity, and cooling and curing, complete all as specified, as per manufacturer's instructions and directed.Note:(i) Surface preparation: The road surface shall be cleaned thoroughly and made completely dry. In case of old asphalt surfaces, suitable primer shall be applied, where required, to ensure proper bonding.(ii) Heating of material: Thermoplastic material shall be heated and melted in a suitable specialised boiler at the manufacturer's recommended temperature, generally in the range of 180°C to 200°C, until it attains the required molten condition.(iii) Application: Thermoplastic rumble strips shall be applied using a specialised screed box or automated rumble-strip application machine capable of extruding the material at the specified thickness, generally 10 mm, and at the specified intervals. The individual strips shall be approximately 150 mm wide, or as specified in the drawings/site requirements.(iv) Application of glass beads: While the thermoplastic material is still hot, suitable retro-reflective glass beads shall be uniformly applied to the surface to provide adequate night-time visibility.(v) Cooling and curing: The applied rumble strips shall be allowed to cool and harden adequately before opening the road to traffic, in accordance with the manufacturer's recommendations and site conditions. |
| 7 | S&F in repair solar cat-eye, with aluminium alloy housing, IP65 waterproof design, size 125 mm × 125 mm × 25 mm, with 65 mm shank, comprising high-efficiency monocrystalline solar panel rated 2.4 V/0.3 W, one Ni-Cd rechargeable battery rated 1.2 V/1600 mAh, and super-bright LED having luminous intensity of 10,000–18,000 mcd, installation as per manufacturer's instructions, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 8 | S&F in repair solar cat-eye, with aluminium alloy housing, IP65 waterproof design, size 125 mm × 125 mm × 25 mm, with 65 mm shank, comprising high-efficiency monocrystalline solar panel rated 2.4 V/0.3 W, one Ni-Cd rechargeable battery rated 1.2 V/1600 mAh, and super-bright LED having luminous intensity of 10,000–18,000 mcd, installation as per manufacturer's instructions, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender