Housing Urban and Rular Development Government Departments Closing in 7 days TDR #58325770

Tender For Construction Of Additional Room And Lavatory At Naibat Office Sumbal.

Issued by Government Departments · Ganderbal, Jammu and Kashmir
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
7 days left
EMD
9980
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Additional Room And Lavatory At Naibat Office Sumbal.

BOQ

Name of Work:- Construction of Additional Room and lavatory at Naibat Office Sumbal.
Sl. No. Item Description
1Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed.
2P/L of dry stone soling duly hand packed including all carriages loading unloading complete job in trenches incl. head load.
3P/L in position cement concrete of specified grade excl. the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size).
4Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved.
5Providing and laying in position specified grade of Reinforced cement concrete M15 (1 : 2: 4) excluding the cost of centering, shuttering, finishing and reinforcement.All works upto plinth level including carriage complete.
6Providing/laying in position specified grade excluding the cost of centering & shuttering . (M-10 Mix) 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved.
7Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns slabs etc for mass concrete.
8Centring and shuttering including strutting proping and removal of form work for suspended floors, slabs.
9Reinforcement for RCC works including straightening cutting bending placing in position and binding all complete (Thermomechanically Treated Bars) Incl. carraige and head load
10Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
11Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
12Providing and fixing imported wood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position.
13Providing and fixing Ceramic glazed wall/floor tiles 450x300mm (thickness to be specified by the manufacturers) make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.
1412mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand)
15Providing and laying of cement concrete rings 3' wide in soakage pit includind excavation and a cover slab all complete job
16providing and placing on terrace polythene water storage tanks ISI 12701 marked indicating the BIS license no with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support
17Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random all types fittings involved. This includes testing of joints complete as per direction of Engineer-in charge PN-16 pipe, 16mm OD(SDR-7.4)
18Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
19providing and fixing soil waste, vent pipes 100mm including tees bends all complete job
20providing and fixing soil waste, vent pipes 75mm including bends all complete job
21providing and fixing CI bib cocks 15 mm of approved make and desire
22Providing and fixing panelled or panelled and glazed shutters for doors, windows and celerestory windows including ISI mark black enamelled butt hinges with necessary screws incl panelling of door shutters and glazing of windows 30mm thick imported wood
23Painting with synthetic enamel paint two or more coats on wood work of approved brand and manufacture to give an even shade on wood work including a coat of primer.
24Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
25Providing and fixing of hardware items of good quality including cost of screws all complete job:Handles 5\\"
26T bolt 5\\"
27T bolt 4\\"
28Latch locks
29Providing and fixing of soap case of approved quality
30Floor Trap 4\\"
31Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 15 mm nominal bore
32Providing and fixing of Gate valve of approved quality
33Providing and fixing of health faucet of approved quality.
34Providing and applying white cement based putty/POP of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm Thick
35Providing and fixing glass panes with wooden beeding and nails incl putty,screws complete:Float glass panes of thickness 3mm weight not less than 10kg/sqm.
36Providing and fixing PVC pipe 25 mm dia for electric conduits
37Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 10AMP dp MCB INCL 12 WATT LED Lamps
38Wiring for HEATING point/ call bell point with 4.00 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 10AMP dp MCB
39Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
40Carriage of stone aggregates avg lead 15 km
41Carriage of sand avg lead 5 km
42Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58325770
AUTHORITY Government Departments
TENDER VALUE 4.99 Lakhs
LAST DATE 09-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Additional Room And Lavatory At Naibat Office Sumbal.
Basic Detail
Tender No NIT NO 87 OF 2026-27/SUMBAL DIVISION
Bidding Type Tender
Location
City Ganderbal
State Jammu and Kashmir
Key Dates
Publish Date 02 Nov 2026
Submission Date 09 Nov 2026
Open Date 10 Nov 2026
Finance
Tender Value 4.99 Lakhs
Tender Fee 200
EMD 9980
Exemption Not Available
Document List
7c5f68e4-3fd9-47d1-a9f4-a0ff54ba2455.html
BOQ_1119186.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 02, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

7c5f68e4-3fd9-47d1-a9f4-a0ff54ba2455.html

xls

BOQ_1119186.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender