Tender For General-Conversion Of Existing Badminton Court To An Indoor Badminton In Judicial Academy ,Athani-Electrification And Lighting-General Electrical Work
Tender Value
2.53 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
6 days left
EMD
6349
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Conversion Of Existing Badminton Court To An Indoor Badminton In Judicial Academy ,Athani-Electrification And Lighting-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Work |
| 2 | OD128727/2026-2027:Charges for dismantling the existing old fan, exhaust fan, light points and fittings etc...., complete, making good the damages of walls and conveying the dismantled materials to section store. |
| 3 | 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B |
| 4 | 1.14.3:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 5 | OD136426/2026-2027:Supply Conveyance, installation, testing and commissioning of 174.9 W LED flood light output Approximately 21,900 lumens(implied by LED219 designation), 5700K or 6500K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and : Single-piece die-cast aluminum with gray finish housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 6 | OD128728/2026-2027:Supply, installation , testing and commissioning of the 380 mm sweep heavy duty exhaust fan working on 230 V A/C 900 rpm in the existing opening including making the holes to suit the size of the above fan, 380 mm Exhaust Fan Almonard 15\\"HD 1Q 900 RPM |
| 7 | OD128729/2026-2027:Supply, installation , testing and commissioning of the 450 mm sweep wall fan metal body with metal blades ( Make: Orient 450 mm Tornado Wall II-P/C Blk Guard/ equivalent) working on 230 V A/C having 1325 rpm wit air delivery of 100 CMM making good the damages etc. as required including giving connections. |
| 8 | 90.12.5.41:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm |
| 9 | 9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 10 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 11 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 12 | 1.17.5:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 X 1.5 Sq. mm |
| 13 | 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 14 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 15 | 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 16 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole |
| 17 | 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 18 | OD137633/2026-2027:SITC of 2.0 KVA home UPS/ Inverter with pure sine wave output, DSP based intelligent control, Ideal for mixed load application, Input voltage of 90-270V AC under normal mode and 195-260V AC under UPS mode, input frequency of 50Hz +/- 5Hz output voltage of 220V +/- 5%, output frequency of 50Hz +/- 0.5Hz having Over load protection, short circuit protection battery low protection LED and sound indications. The system should have battery backup using 2 number 12V 150AH tubular battery and the system shall include a minimum warranty of 3 years for Inverter and 4 years for battery. Make of inverter: Hykon SP PLUS Home UPS 2500 or equivalent. Make of Battery: Amaron Quanta/ Exide EL including rack and interconnecting cables. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender