Tender For Construction Of G+2 Office Building At Golaghat Esd Office C Us (First Phase) On Full Turnkey Mode.
Tender Value
1.16 Crore
Estimated cost
Bid Submission
16 Nov 2026
1 days left
EMD
3.75 Lakhs
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Golaghat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of G+2 Office Building At Golaghat Esd Office C Us (First Phase) On Full Turnkey Mode.
BOQ
| Sl. No. | Item Description |
| 1 | Please Enable Macros to View BoQ information |
| 2 | Construction of G+2 Office Building at Golaghat ESD office campus (First Phase) on full turnkey mode. |
| 3 | Total Amount of Supply Price |
| 4 | Total Amount of Installation/Erection charges |
| 5 | Total of complete work |
| 6 | Discount if any Offered by Bidder in % |
| 7 | Construction of G+2 Office Building at Golaghat ESD office campus (First Phase) on full turnkey mode. |
| 8 | Annexure-1 |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge. All kinds of soil |
| 10 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. |
| 11 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). i) In prop 1 cement: 3 sand :6 coarse aggregate by volume |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 15 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 19 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 1:6 (1 cement: 6 fine sand) |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 21 | Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100 mm x 75 mm x 3.55 mm) with necessary screws (other fittings to be measured and paid separately )-I) With Teak wood / Sissu wood. (b) 35 mm thick |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)-21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 23 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 24 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.1 Double charge vitrified tile polished finish of size |
| 25 | Glazed Vitrified tiles Matt/Antiskid finish of size-11.41A.3.1 Size of Tile 600 x 600 mm |
| 26 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 27 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. 13.42.1 Two or more coats on new work |
| 28 | Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 29 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 30 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 31 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. |
| 32 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 9.46.2 20 mm dia |
| 33 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavyweight) with stainless steel screws etc. complete : 9.71.1 125x64x2.50 mm |
| 34 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),300x16 mm transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 35 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.97.1 300x10 mm |
| 36 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.100.1 125 mm |
| 37 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint |
| 38 | Supplying with installation, testing and commissioning of Hi-wall 3 STAR rating, non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical condition as approved by the Department upto 5m between the room unit and outdoor unit as directed by the department. |
| 39 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil |
| 40 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 41 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 42 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 43 | Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts |
| 44 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 45 | CEMENT PLASTER (IN FINE SAND): 20 mm cement plaster of mix : |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 49 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.2 Rectangular shape 453x357 mm |
| 50 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 51 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 52 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe-17.28.2.1 32 mm dia |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Internal work- 20 mm nominal dia Pipes |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-18.7.5 40 mm nominal dia Pipes |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 18.9.9 100 mm nominal dia Pipes |
| 56 | C.P. BRASS FITTINGS-Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore |
| 57 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore |
| 58 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required-17.10.2 Kitchen sink without drain board-17.10.2.1 610x510 mm bowl depth 200 mm |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 17.10.2.1 610x510 mm bowl depth 200 mm |
| 60 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. iv) Bore hole of 150mm diameter |
| 61 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories,lowering of assembly pipes concentrically in theborehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by theDepartment. PVC PIPE/SUPREME /PRINCE / FUSION /SFMC Brand-v) 110mm diameter |
| 62 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipescomplete as directed. B) PVC PIPE/SUPREME / PRINCE / FUSION /SFMC Brand-iv) 50mm diameter |
| 63 | Supplying fitting and fixing check valve (non return valve) including thread to pipes. iv) 50mm diameter |
| 64 | Supplying fitting and fixing ISI approved 3HP panel along with all accessories including 4.5 sq mm cable as directed by Engineer- Incharge |
| 65 | Supplying fitting and fixing ISI approved Submersible pump (3HP)along with all accessories as directed by Engineer- Incharge |
| 66 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm |
| 67 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides |
| 68 | Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) in surface flat ISI marked casing \\"n\\" capping system including earth continuity. 1.8.2 With 2x4 sq mm +earth continuity with 1x2.5 sq mm in flat 19 mm ISI marked casing 'n' capping system. |
| 69 | Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) in surface flat ISI marked casing \\"n\\"capping system including earth continuity. 1.9.1 With 3x2.5 sq mm +earth continuity with 2x1.5 sq mm in flat 19 mm ISI marked casing 'n' capping system. |
| 70 | Supplying including fitting and fixing of following AC Ceiling fan complete with all accessories like down rod, canopy etc of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the Department. (without regulator). |
| 71 | Supplying including fitting and fixing of AC Ceiling fan regulator including connections etc, complete as required. |
| 72 | Supplying including fitting and fixing of following AC Exhaust fan complete in the existing hole on the wall of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the Department. |
| 73 | Supplying and fixing of Switch/Socket flush type Anchor penta PC cherry/including connections as approved by the Department complete as required. |
| 74 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all the accessories including 20 watts CFL lamp and connection as approved by the Deptt. As needed. |
| 75 | Supplying and fixing of Call bell including 6 amp capacity flush type bell push switch including connection as approved by the Deptt. As needed |
| 76 | Supplying with installation, testing and commissioning of Hi-wall 3 STAR rating, non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical condition as approved by the Department upto 5m between the room unit and outdoor unit as directed by the department. |
| 77 | Installation, testing and commissioning of precabled fluroscent fittings of all types, complete with all accessories and tubes etc, directly with 1.5 sq mm PVC copper wires as required. |
| 78 | Supplying with fitting and fixing Voltage Stabilizer of the following specifications complete as directed by the Deptt. |
| 79 | Supply with installation and commissioning of readymade maintenance free CPRI approved technology including plastering both inner and outer surface of brick wall as specified and directed. |
| 80 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. |
| 81 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mm x 10mm x 2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers,handles including applying a priming coat of red lead paint. |
| 82 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained). |
| 83 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.2) Sides of tie beams, grade beams etc. at or below ground level. ii) Using 25 mm thick plank |
| 84 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.3) Columns, Pillars, Posts & Strut-a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical faceii) Using 25 mm thick plank |
| 85 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.5) Flat Surfaces such as soffits of suspended floors,roofs, edges of slab, landings, cantilever slabs,chajjas, balconies and the like.a) Floors etc. upto 200mm in thickness. ii) Using 25 mm thick plank |
| 86 | Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). |
| 87 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately). (A) 112 mm thick brick wall (b) In cement mortar in proportion 1:5 (1 cement:5 sand) |
| 88 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx 3mmx 250mm) as per design embedded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi) |
| 89 | Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100 mm x 75 mm x 3.55 mm) with necessary screws (other fittings to be measured and paid separately) |
| 90 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc.as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately.) |
| 91 | Varnishing two coats (excluding priming coat) on new wood and wood-based surfaces under coating with flatting varnish and finishing coat with copal varnish or spar varnish to give an even surface including cleaning the surface of all dirt, dust and filling the knots, crack etc with specially made wood putty and sand papering so as to produce a smooth, dry surface. |
| 92 | Applying two coats of wood preservative oil (colourless) of approved make on new wood and wood-based surfaces, after including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. |
| 93 | Providing, fitting and fixing standard aluminium sliding windows and ventilators of standard sections ( with minimum thickness 1.9 mm ) of approved brands without horizontal glazing bars joints mitred and jointed with SS screws (manufactured to IS: 733 and IS: 1285 specifications) and providing and fixing handles, angle cleat, EPDM rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (Glazing to be measured and paid separately ) |
| 94 | Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Clear Glass-5.00 mm thick |
| 95 | Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Frosted Glass- 5 mm thick |
| 96 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, squre or round M.S.bars with round headed bolts, nuts or screws. 10.2.2) Ornamental grill c) Fixed to steel frames (@ 10.5 kg/sqm) |
| 97 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf) / white cement slurry mixed with approved pigment to match shade of tiles,mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. |
| 98 | Providing ceramic wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. |
| 99 | 15 mm thick Cement plaster in single coat on brick / AAC/concrete walls for plastering for both fair or rough side up to 1st floor level including arises, internal rounded angles, not exceeding 80 mm girth and finished even and smooth including curing complete as directed. |
| 100 | Providing two coats of 1.5 mm thick acrylic water based wall putty / wall filler of Asian Paints/ Berger/ Dulux/ Flixo Paints/ Aria Paints/ over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified. |
| 101 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. Approved brand and manufacture |
| 102 | Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 103 | Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately). Indian type W.C Orissa pattern of size 580 x 440 mm |
| 104 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. |
| 105 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead, CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) |
| 106 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) |
| 107 | Providing vitreous China wash basin with CI/MS brackets,C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) |
| 108 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required. |
| 109 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme / Prince) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia |
| 110 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme / Prince) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (vii) 50mm dia |
| 111 | Supplying fitting and fixing approved uPVC Pipes of sizes, with all necessary ‘R’ brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ SFMC/ PRINCE/ FUSION/ PRAYAG/ HSIL/AAJAY/Birla Aerocon/ ashirvad/ OM SHREE/ SKIPPER/TRUFLO or equivalent-a) 50 mm dia |
| 112 | Supplying fitting and fixing approved uPVC Pipes of sizes, with all necessary ‘R’ brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (B) Concealed by chieselling or breaking brick wall/C.C. wall/ R.C.C. wall and making good to the damaged structure- e) 20 mm dia |
| 113 | Supplying fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) |
| 114 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified |
| 115 | Supplying and fitting fixing C.P. pillar cock of 15 mm dia of approved brand as specified and directed. |
| 116 | Supplying and fitting ball valve as specified and directed. |
| 117 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona |
| 118 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. |
| 119 | Wiring for light/fan/call bell point with 2x1.5 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. 1.1.1 Short point upto 3.00 metre length |
| 120 | Wiring for light/fan/call bell point with 2x1.5 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. 1.1.2 Medium point upto 6.00 metre length |
| 121 | Wiring for light/fan/call bell point with 2x1.5 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. 1.1.3 Long point upto 10.00 metre length |
| 122 | Wiring to a 5 pin 6 Amps plug point with 1.5 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. 1.2.1 Short point upto 3.00 metre length |
| 123 | Wiring to a 5 pin 6 Amps plug point with 1.5 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. 1.2.2 Medium point upto 6.00 metre length |
| 124 | Wiring to a 5 pin 6 Amps plug point with 1.5 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. 1.1.3 Long point upto 10.00 metre length |
| 125 | Wiring to a 5 pin 6 Amps plug point with 4 sq mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) with flat 19 mm ISI marked casing \\"n\\" capping etc, as complete and specified by the department. |
| 126 | Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) in surface flat ISI marked casing \\"n\\" capping system including earth continuity. 1.8.1 With 2x2.5 sq mm +earth continuity with 1x1.5 sq mm in flat 19 mm ISI marked casing 'n' capping system. |
| 127 | Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) in surface flat ISI marked casing \\"n\\" capping system including earth continuity. 1.8.2 With 2x4 sq mm +earth continuity with 1x2.5 sq mm in flat 19 mm ISI marked casing 'n' capping system |
| 128 | Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finnolex/RR Kabel or equivalent make as approved by the Dept) in surface flat ISI marked casing \\"n\\"capping system including earth continuity. 1.9.1 With 3x2.5 sq mm +earth continuity with 2x1.5 sq mm in flat 19 mm ISI marked casing 'n' capping system. |
| 129 | Supplying including fitting and fixing of following AC Ceiling fan complete with all accessories like down rod, canopy etc of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the Department. (without regulator). |
| 130 | Supplying including fitting and fixing of AC Ceiling fan regulator including connections etc, complete as required. |
| 131 | Supplying including fitting and fixing of following AC Exhaust fan complete in the existing hole on the wall of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the Department. |
| 132 | Supplying and fixing of Switch/Socket flush type Anchor penta PC cherry/including connections as approved by the Department complete as required. |
| 133 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all the accessories including 20 watts CFL lamp and connection as approved by the Deptt. As needed. |
| 134 | Supplying and fixing of Call bell including 6-amp capacity flush type bell push switch including connection as approved by the Deptt. As needed |
| 135 | Supplying with installation, testing and commissioning of Hi-wall 3 STAR rating, non-ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical condition as approved by the Department upto 5m between the room unit and outdoor unit as directed by the department. |
| 136 | Installation, testing and commissioning of precabled fluorescent fittings of all types, complete with all accessories and tubes etc, directly with 1.5 sq. mm PVC copper wires as required. |
| 137 | Supplying with fitting and fixing Voltage Stabilizer of the following specifications complete as directed by the Deptt. 3.0 KVA Automatic input stabilizer |
| 138 | Providing fitting, hoisting and fixing of roof trusses fabricated out of Rectangular Hollow Section (RHS) & Square Hollow Section (SHS) including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. b) Using Nezone / other ISI marked approved specification of RSH / SHS Nezone-1) Purlins SHS 72 x 72 x 3.2 @ 13.5 kg/mtr |
| 139 | Providing fitting, hoisting and fixing of roof trusses fabricated out of Rectangular Hollow Section (RHS) & Square Hollow Section (SHS) including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. b) Using Nezone / other ISI marked approved specification of RSH / SHS Nezone-2) Top Chord 50 x 50 x 2.6 @ 1.02 kg/mtr |
| 140 | Providing fitting, hoisting and fixing of roof trusses fabricated out of Rectangular Hollow Section (RHS) & Square Hollow Section (SHS) including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. b) Using Nezone / other ISI marked approved specification of RSH / SHS Nezone-3) Bottom Chord 80 x 40 x 3.2 @ 1.02 kg/mtr |
| 141 | Providing corrugated galvanized Iron sheet roofing made up of High Strength Steel of minimum Tensile Strength of 450 MPa with 120 gsm (gram/Sqm) Zinc coating on both side as per class 8 of BIS including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (a) 0.45 mm Total Coated Thickness (TPT) |
| 142 | Demolishing plain cement concrete including disposal of debris as directed for all levels. |
| 143 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels. |
| 144 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels. |
| 145 | Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels. |
| 146 | Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels. |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender