Tender For Structural Repairs To Shiv Samarth Statues
Tender Value
44.18 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
17 days left
EMD
1.04 Lakhs
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Structural Repairs To Shiv Samarth Statues
BOQ
| Sl. No. | Item Description |
| 1 | Providing, fabricating, detailing and fixing at desired location using stainless Steel Hot Rolled Amealed Pickled Plates Duplex stainless steel grade 2205 of standard IS 6911, UNS S322005, (X02Cr22Ni6Mo3n) having chemical properties of C 0.03% Max, Mn 2 max, Si 1% max., S 0.02%% max, P 0.03 max, Ni 4.5-6.5 max, mo 3-3.5, Cr 22 0-23, N 1400-2000 PPM & mechanical properties 0.2% proof stress 450 MPA min, Ultimate Tensile Strength 655 MPA, min % Elongation 25, Hardness 32 HRB max, finish N1/ME, of make SAIL, JSL or equivalent, inclusive of all necessary testing & certification etc. complete, transportation to site and erecting structural stainless steel members for all height & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washer, cleats, stiffners, gassets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining, if specified, welding, grinding and removing the welding burr etc.including crane or chain pully, complete as directed by Engineers In Charge. |
| 2 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 3 | Grouting pockets, holes, pipe sleeves of any shape or size for column bases, machine foundations, etc. with ready to use non shrink high strength grout of approved make, as per manufacturer’s specifications and instructions/ recommendations, including roughening of surfaces, cleaning with compressed air/ water jets, ramming, curing, etc. complete. |
| 4 | Providing and applying high-performance, non-staining, non-bleeding, neutral-cure weatherproof silicone sealant / specialized metal putty (such as Dow Corning, Molykote, or approved equivalent) to seal structural and cosmetic panel joints of the five-metal alloy (Panchdhatu) / bronze statue, including surface preparation, cleaning with non-corrosive, non-oxidizing agents and matching the sealant patina to the metal surface. All work is to be executed seamlessly, ensuring complete water-tightness and weatherproofing, finished to a professional aesthetic standard, complete as per direction of the Engineer-in-Charge. |
| 5 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work |
| 6 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete |
| 9 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender