Tender For Repair/Maint Incl Replacement Of Internal Electric Wiring Of Residential And Non Residential Bldgs Under Term Contract (E&M) For Artc & S At Shokhuvi
Tender Value
33.06 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
14 days left
EMD
66500
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dimapur → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Incl Replacement Of Internal Electric Wiring Of Residential And Non Residential Bldgs Under Term Contract (E&M) For Artc & S At Shokhuvi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials will be the property of contractor and contractor will be paid schedule of credit to the Department . |
| 2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano/modular type switch, phenolic laminated/modular sheet & plate, suitable size GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required |
| 3 | Supplying and fixing 5 Amps switch socket on the existing board including connections etc as required. (ANCHOR/MARU/KINJAL/REO) |
| 4 | Supplying and fixing 15 Amps switch socket on the existing board including connections etc. as required (ANCHOR/MARU/KINJAL/REO) |
| 5 | Supplying and fixing stepped type electronic fan regulator on the existing plate switch box including connections but excluding modular plate etc. as required (ANCHOR/MARU/KINJAL/REO) |
| 6 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. (ANCHOR/MARU/KINJAL/REO) |
| 7 | Supplying and fixing batten/ angle holder including connection etc. as required. (ANCHOR/MARU/KINJAL/REO) |
| 8 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm and 1x 2.5 Sqmm earth wire complete for power plug wiring and submain wiring. |
| 9 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm and 1x 4 Sqmm earth wire complete for power plug wiring and submain wiring. |
| 10 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm and 1x 6 Sqmm earth wire complete for power plug wiring and submain wiring. |
| 11 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying and fixing MCB SPN 40 Amps, 240/415 volts, in the existing MCB DB complete with connections, testing and commissioning. |
| 13 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as reuired. |
| 14 | 8 way, double door |
| 15 | 12 way, double door |
| 16 | Supplying and fix DP sheet steel enclosure on surface /recess along with 25/32 Amps 240 V C curve DP MCB complete with connections, testing and commissioning as required. |
| 17 | Supply & fix LED tube light along with fixture, 20 W including necessary connection from ceiling rose complete (Make: Philips/Bajaj/Havells) |
| 18 | Supplying and fixing fan capacitor of 2.5 mfd of approved quality (Make : Havelles/USHA/Crompton) |
| 19 | Supply, Installation, Testing and Commissioning of 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 20 | Taking down old existing fitting any type and S & F of recess / surface mounting LED flat panel 2'X2' made of sheet steel housing duly powder coated with high efficient LEDs & glare free full opal diffiuser, IP20 of capacity 36 watt complete all as specified and directed. |
| 21 | Supply & fix of exhaust fan steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, voltage 230V, 50Hz, RPM 1200, copper winding complete including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV exhaust fan complete all as specified and directed. |
| 22 | Providing and fixing, 100 Amp TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubical panel , making connection etc. as required |
| 23 | Supply and fixing busbar chamber complete 100 Amps, 415 Volts, 4 plate complete (Make : Havells/GECO/ Anchor) |
| 24 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thickincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 1.5 metre long etc. with charcoal/ coke and salt as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender