Tender For Provision Of Power Supply & Data Communication For Rvr At Runway-26, Dehradun Airport.
Tender Value
17.52 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
19 days left
EMD
35043
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Power Supply & Data Communication For Rvr At Runway-26, Dehradun Airport.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 3C X 35sqmm size XLPE insulated, PVC sheathed Aluminum conductor armoured power cable of 1.1 KV grade confirming to IS:7098 Part-I with upto date amendments etc. complete as required. |
| 2 | Supply of 40 mm dia. (OD-40 mm & ID-32 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16205 PART 24 (formerly known as IS 14930 Part II) with fitting from AAI preferred makes. |
| 3 | Supply of 50mm OD with minimum wall thickness 2.30mm , PN 6 PE 63 HDPE pipe conforming to IS 4984-2016 marked including suitable size PP rope, etc. complete in all respect from AAI preferred makes. |
| 4 | Supply and drawing of 6 core, single mode standard loose tube armored Optical fiber cable conforming to IEC/ITU standard & other relevant standards as per tender specifications complete as required. |
| 5 | Laying of 40 mm dia. /50 mm size DWC/ HDPE pipe respectively with all accessories like socket, bend, couplers etc. with fitting and cutting, jointing etc. direct in ground (75 cm to 100cm below ground level) including excavation and refilling the trench but excluding rocks/ bolders etc. making good the same as required. |
| 6 | Laying & fixing of 40 mm dia. /50 mm size DWC/ HDPE pipe respectively with all accessories like socket, bend, couplers etc. with fitting and cutting, jointing etc. on wall/ceiling surface clamped with 2mm thick GI saddle. |
| 7 | Laying of one number PVC insulated & PVC sheathed / XPLE power cable of 1.1 KV grade cable of size not exceeding 35sqmm in the existing RCC/ Hume/ Stoneware/ Metal Pipe/ HDPE DWC Pipe using suitable duct rodder as required. |
| 8 | Excavation of the cable trenches in hard rock not exceeding 1.5 meters in width, and lift up to 1.5 meters, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 meters. |
| 9 | Supplying and making end termination with brass compression gland and aluminium lugs for 1.1KV grade cable of size 3C X 35sqmm PVC insulated and PVC sheathed / XLPE aluminium conductor as required |
| 10 | SITC of 2 KVA(1-1) Double-conversion true On-line UPS, Hi Frequency PWM (Pulse Width Modulation) conforming to IS 16242 (Part 3) standards with Single phase AC input voltage 150-280V & single phase out put @50 Hz, <3% THDi with inbuilt isolation transformer having 15 Minutes battery backup using SMF (Sealed Maintainence Free) batteries with batteries stand including uninyvin copper conductor flexible cable of suitable size from Battery bank to UPS. It shall be housed in suitable rugged enclosure aesthetically finished duly Pre-treated and powder coated. Digital Metering, Monitoring, Protection, Features & performance parameters shall be as per OEM & tender specifications. |
| 11 | Earthing with Maintenance free Earthing System. The Rod shall be copper bonded low carbon high tensile steel with 17.2 mm dia. and 10 feet length, UL Listed with molecularly bonded with min. 250 microns coating of 99.90% pure electrolytic grade Copper and tested by CPRI capable of bearing fault current of 25 kA for 1 second with SS 304 Clamp, along with earth enhancement compound in a sealed bag of minimum 30 kg (10 kg Bag x 3) (95% carbon based compound, resistivity is less than 0.12 ohm meter) with Poly Plastic Pit Cover 300x300x195 mm with load Bearing Capacity 5000 kg. (Job includes Supply, Installation, Testing and Commissioning) |
| 12 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 13 | Providing and fixing 4.00 mm dia. copper wire on surface or in recess for loop earthing as required. |
| 14 | Providing and fixing of lightning conductor finial, made of 25 mm dia., 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 15 | Supply, Installation, Testing & Commissioning of following sizes floor mounted outdoor type LT cubicle panel made out of Thermoplastic Polycarbonate with IP 65 in accordance with EN 60529 (Dust Proof, Water Proof & Weatherproof) & Chemical & UV Resistant, conforming to glow wire tested in accordance with IEC 60 695-2-11. The polyurethane internally embedded gasket material shall be provided.The impact strength of enclosures / boards shall comply IK-08 rating. Panel shall be mounted on FRP CLADDING Frame & provided with FRP Canopy of size 100 mm more than cubicle size to protect rainwater ingress. |
| 16 | ATS Power distribution panel :The size of the panel shall be 600(W) x600x(H)170(D)mm excluding frame /canopy with mounting height as per site requirement . It shall comprises of following switchgears & other accessories: i) Incomer: 2 nos: 2 no. DP 32 A,10KA MCB with LED type indicator with control fuse. 1no: : 4P, 32 A, ATS compliant to IEC 60947-6-1 with LED type indicator with control fuse at output.ii)Ougoing: 1 nos: DP 32 A,10KA MCB ( I/c from ATS)6 nos: 6A, 10KA, SP MCB with connector for output wire/cable iii) Other Accessories:a)Wiring Accessories, Earth strip, Sleeves, Ferrules, Dinrail, Neutral Link, End clamp, Acc, Etc.b) Any other item required to complete the job. |
| 17 | ATS Power distribution panel :The size of the panel shall be 300(W) x450x(H)170(D)mm excluding frame /canopy with mounting height as per site requirement . It shall comprises of following switchgears & other accessories: i) Incomer: 2 nos: 2 no. DP 32 A,10KA MCB with LED type indicator with control fuse. 1no: : 4P, 32 A, ATS compliant to IEC 60947-6-1 with LED type indicator with control fuse at output.ii)Ougoing: 1 nos: DP 32 A,10KA MCB 6 nos: 6A, 10KA, SP MCB with connector for output wire/cable iii) Other Accessories:a)Wiring Accessories, Earth strip, Sleeves, Ferrules, Dinrail, Neutral Link, End clamp, Acc, Etc.b) Any other item required to complete the job. |
| 18 | Supply & Installation of 6 port, 1U rack mounter/wall mounted (as required) Metal/Alloy housing, fully powder coated grooves for fixing splice protective sleeves (inbuilt or additionally) suitable for termination of minimum 02 nos of OSP/OFC Cables loaded with LC SM Pigtail, Splice tray & Couplers & Splice Protectors . It also include the splicing of 6 core OFC OSP cable & testing of the same. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender