Tender For Construction Of Compound Wall For Mrs, Renovation Of Mrs Building And Providing Mezzanine Floor In The Store Building
Tender Value
42.45 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
15 days left
EMD
84910
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Compound Wall For Mrs, Renovation Of Mrs Building And Providing Mezzanine Floor In The Store Building
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing the existing floor tiles set in cement mortar by manually/ mechanical means, including cleaning, removal and disposal of all unserviceable materials, and dumping the debris with in a lead of 150m, complete as directed by the Engineer-in-Charge. |
| 2 | Dismantling and removing the existing GI roofing sheet including ridges, hips, valleys and gutters etc., and stacking serviceable materials at the Civil store and disposing of all unserviceable materials in to the scrap yard inside CSL including all labour, other incidentals, hire for tools& plants etc. complete all as per the direction of Engineer-in-charge. |
| 3 | Dismantling and removing the existing chainlink fencing and post including stacking the serviceable dismantled materials in civil store, and disposal of unservicable materials in the scrap yard inside CSL, including all labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 4 | Demolishing brick work by manually/ mechanical means including breaking down the dismantled materials into pieces not exceeding 15 cm in size removing and disposal of all unserviceable materials, and dumping the debris with in a lead of 150m. The rate shall include all labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 5 | Demolishing R.C.C / P.C.C work by manually/ mechanical means breaking down the dismantled materials into pieces not exceeding 15 cm in size removing including stacking and disposal of steel bars in the scrap yard inside CSL and disposal of all unserviceable materials, and dumping the debris with in a lead of 150m. The rate shall include all labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 6 | Dismantling flushing cistern, wash bain etc. of all types (CI/PVC/Vitrious China) including disposing of all unserviceable materials at the dumping yard inside CSL, complete as directed by the Engineer-in-Charge. The rate shall include all labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 7 | Earth work excavation in all kinds of soils by manual/ mechanical means (hydraulic excavator), lift up to 1.5m including dressing of sides, ramming of bottoms, dewatering, leading water into drains, getting out the excavated soil and then back filling, etc. and disposing of surplus excavated soil with in a lead of 150m. The rate shall include all labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. |
| 8 | Disposal of unserviceable materials by using Tipper & Hydraulic excavator from site, to the Shipyard Estate at Cheriya Kadavanthra, including breaking down the dismantled materials into pieces not exceeding 15 cm in size, loading, transporting, unloading, levelling the unloading waste etc. complete as directed by the Engineer-in-Charge. Rate is inclusive of all operational expenditure, including the operational cost of Hydraulic excavator & Tipper. |
| 9 | Providing and constructing 30x20x15 cm solid concrete block masonry in CM 1:5 in walls at ground floor level, using best quality solid concrete blocks including cost & conveyance of all materials, cement,scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete as directed by the Engineer - in - charge. |
| 10 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to Ist floor level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer in-Charge. The rate shall include all materials, labour, hire for tools & plants, other incidentals etc. complete all as per the direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 11 | Plastering with C.M 1:4, 12mm thick, floated hard and trowelled smooth including cost and conveyance of all materials, cement, labour, curing etc.complete all as directed by the Engineer-in- charge. |
| 12 | Providing and laying in position cement concrete of grade 1:4:8 using 40mm nominal size stone aggregate including cost and conveyance of all materials, formwork, cement, labour for mixing, laying, consolidating curing, hire for tools & plants etc. complete all as directed by the Engineer-in- charge. |
| 13 | Supply & Fabrication of reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling, straightening, cutting, bending, laying & tying with 22G binding wire, fixing cover blocks etc.complete including cost of steel (mild steel or tor steel) and cost of binding wire. |
| 14 | Providing and laying reinforced cement concrete 1:1.5:3 using 20mm down graded broken granite metal for columns, beams and slabs, including the cost and conveyance of all materials, cement, form work, labour for mixing, laying, consolidating, curing, cost of dewatering etc. complete in all respects, but excluding the cost of reinforcement, as directed by the Engineer-in-Charge. |
| 15 | All work upto plinth level |
| 16 | Above plinth level up to 1st floor level |
| 17 | Supplying and laying approved type Step Tiles of size 900x300mm or more available size of approved quality and colour, set in CM 1:3, 20mm thick and adding necessary cement grout for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, cement, labour other incidentals etc. complete, all as per the directions of Engineer-in-charge. ( basic rate of tile is Rs.1310/m2) |
| 18 | Providing and laying double charge glossy light shaded vitrified floor tiles not less than 1200 x 600mm or more available size of approved make, quality and colour after clearing the floor properly and scratching the floor before pasting the tiles using chemical adhesive Cerabond, Myk or equivalent and pointing the joints of tiles having joints of 3 mm width, using epoxy grout, including cost of all materials, tiles, cement, labour, filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile = ₹600/m2) |
| 19 | Providing and laying ceramic floor tiles not less than 600 x 600mm or more available size of approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including cost of all materials, tiles, cement, filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile = ₹610/m2 excluding GST) |
| 20 | Providing and fixing Ceramic wall tiles not less than 600 x 600mm or more available size of premium quality of approved make ,quality and colour for dadoing by pasting with chemical adhesive Cerabond, Myk or equivalent and pointing the joints of having joints of 3mm width,using epoxy grout,filling/grouting, finishing, cost and conveyance of all materials labour other incidentals etc. as per the direction of Engineer-in-charge. (Basic rate of tile = ₹610/m2 excluding GST). |
| 21 | Supplying and fixing roofing/cladding with 0.46mm thick coloured Aluminium Trafford sheet from reputed manufacturers using approved size self tapping, self drilling screws on overlaps and center of each sheet and throughout the purlin (Minimum 7 Nos. screws in 1 Sq.m) with EPDM sealing washers to be fixed on crest of sheets with minimum end overlaps of 150mm and appropriate side laps including cost and conveyance of all materials labour for all leads and lifts, other incidentals etc. complete. (Finished area of roof sheet before laying ridges/valleys/crimped sheets will only be measured and considered for payment. Overlaps will not be measured) |
| 22 | Supplying and fixing Aluminium sheet ridge capping valley gutters 22G, 600mm wide including cost and conveyance of all materials self drilling screws with sealing washers, with a minimum overlap of 150mm at ends, labour for all leads and lifts up to a height of 5metres etc. complete. |
| 23 | Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mmx38.1mmx2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 8mm thick particle board fixed with EPDM beading between panel and aluminium frame on all faces and the powder coated aluminium divider section fixed at the mid height including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make. |
| 24 | Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 1.60 mm for frames, 38.10 x19.5 x 1.60mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials labour, other incidentals etc. complete as directed by the Engineer-in-Charge. |
| 25 | Washing and cleaning surface of compound wall by washing with water using hoses, brushes ,brooms etc or using water jet at all heights including all labour for removing off all dirt, wild growth etc disposing the debris within a lead of 150m etc complete as directed by the Engineer-in-Charge. |
| 26 | Painting with one coat cement primer of approved premium quality and shade on plastered surface after rubbing and cleaning the surface including cost and conveyance of all materials labour, scaffolding other incidentals, curing (wherever required) etc. complete as directed by the Engineer-in-Charge. |
| 27 | Painting with exterior quality Acrylic emulsion paint of approved premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete as directed by the Engineer-in-Charge. |
| 28 | Supplying, fabricating and erecting of mild steel tubular (round, square and rectangular hollow tubes) of any size and weight by straightening, cutting and welding as per approved drawing or as instructed, erecting in position to line and level by welding embedding in concrete including applying one coat of zinc chromate primer & two coats synthetic enamel paint, hire charges for tools and plants, cost of electrodes, cost of primer & paint, wastage, other incidentals etc. complete all as directed by the Engineer-in- charge. |
| 29 | Supplying, fabricating and erecting of all types of structural steel works by straightening, cutting & welding using all types of steel sections plates, flats, angles, of any size and weight as per approved drawing or as instructed, erecting in position to line and level by welding, embedding in concrete including applying one coat of zinc chromate primer & two coats synthetic enamel paint, hire charges for tools and plants, cost of electrodes, cost of primer & paint, other incidentals etc. complete all as directed by the Engineer-in-charge. |
| 30 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick of compacted bed of 6mm aggregate, PVC sheet, filling the joints with fine sand etc including finishing the edges with cement concrete 1:2:4 all complete as per the direction of Engineer – in – charge. |
| 31 | Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channel, plates etc., including, welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on top of the floor or the side of the waist slab with suitable arrangement as per approval of Engineer – in charge. (For payment purpose, only weight of stainless steel members shall be considered excluding fixing accessories such as nuts & bolts) |
| 32 | Supplying and fixing spine and fin based modular workstation of size 1200x600, with partition thickness as 52.4 mm thk and ht - 1200mm including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with fabric at intermediate level. Top block finished in fabric. Bottom block is finished in metal.Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal.\Intermediate blocks on main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelaminated particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm dPedestals - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal |
| 33 | Executive medium back chairProviding and placing Executive medium back chair OF MAKE Godrej,wipro,featherlite,Damro.The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. 2D Armrest has height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment,position tilt limiter with Back-safety return feature. The chair shall be provided with class 4 pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. |
| 34 | Supplying and fixing of Storage unit : Metal Door with CAM Lock for 1200W* 1950H Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision, Click action mechanism. ,Key removable in locked and unlocked positions. Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of 80kg UDL for 1200W unit 5 Nos. of fixed shelves for 2325(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). |
| 35 | Supplying and fixing European type glazed ceramic water closet single piece with soft close seat cover and twin flush cistern, floor mount with 'S'/'P' trap of accepted brand/ size, including cost and conveyance of all materials, flexible connections, fixing charges, labour etc complete as directed by the Engineer in charge. |
| 36 | Supplying and fixing approved quality and shade 550mmx 400mm or more available size wash hand basins of glazed earthernware, with necessary brackets, one central single lever quarter turn pillar cock with foam flow, one central 15mm PVC connection, 1 no 15 mm CP stop cock , CP brass waste of standard patterns, 32mm PVC waste pipe, cutting and making good the walls, painting the brackets two coats including cost and conveyance of all materials labour, other incidentals etc. complete as directed by the Engineer-in-Charge. |
| 37 | Supplying, cutting, threading, laying and jointing rigid PVC/CPVC pipes including all specials such as tees, bends, elbows, reducers, plugs etc. through walls/ concrete, making good the wall/ concrete after fixing using CM 1:3, taking connection from the existing water supply including cost and conveyance of all materials, labour, testing the line before embedding etc. complete excluding specials of 100 mm dia pipes as directed by the Engineer-in-Charge. |
| 38 | 25mm dia (10kg/cm2) |
| 39 | 32mm dia (10kg/cm2) |
| 40 | 63mm dia (6kg/cm2) |
| 41 | 110mm dia -excluding specials- (4kg/cm2) |
| 42 | Supplying and fixing following water supply and sanitary fittings in position of approved quality, all specials for connecting ( Elbows/ Bend/Nipples etc.), including cost and conveyance of all materials. all labour for fitting, all other incidental charges etc.complete all as directed by the Engineer-in-charge. |
| 43 | CP Two way tap |
| 44 | CP Health Faucets |
| 45 | CP Coat Hook |
| 46 | 600mm or nearest size CP towel rod |
| 47 | SS Gratings with cup of 125/150 mm size. |
| 48 | PVC floor trap(multi trap) |
| 49 | CP disc type quarter turn tap (form flow) |
| 50 | Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwich panel. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, Mortice lock 1nos, 125mm aluminium handle 2 nos, with necessary screws and grips including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender