Tender For Repairing Replacement Of Steel Windows, Provision Of Aluminium Sliding & Fixed Windows And Other Miscellaneous Civil Work At 3Rd To 5Th Floor (Rented To Gst) In Cttc Building, Patna
Tender Value
5.29 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
0 days left
EMD
10600
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Replacement Of Steel Windows, Provision Of Aluminium Sliding & Fixed Windows And Other Miscellaneous Civil Work At 3Rd To 5Th Floor (Rented To Gst) In Cttc Building, Patna
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of Al door by taking out, remembering and readjusting alignment with line and level etc. all complete as per direction and satisfaction of Engineer-in-charge. (a) Up to 3 Sqm |
| 2 | Repairing of steel window by cutting and welding, including replacement of damaged steel members wherever required, ensuring proper alignment, line and level for smooth operation of the window, complete in all respects as per site requirements and as directed by the Engineer-in-Charge. |
| 3 | Repairing of steel window by cleaning all dirt, dust, loose mortar, and rust using a wire brush or other approved means wherever required, including rectification of alignment, line and level to ensure smooth operation of the window, complete in all respects as per site requirements and as directed by the Engineer-in-Charge. |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and making good the damaged surface as per direction of Engineer-in-charge: (a) Of area 3 sq. metres and below |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : (a) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. (a) Old work (one or more coats) |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (a) Cement mortar 1:4 (1 cement :4 coarse sand) |
| 9 | 12 mm cement plaster of mix : (a) 1:6 (1 cement: 6 coarse sand) |
| 10 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections |
| 11 | Credit of dismantled window/Ventilator |
| 12 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (a) For fixed portion (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 13 | (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 14 | Deduct for applying anodic coating AC 10 instead of AC 15 to aluminum extruded section for fixed portion and shutter of doors, windows, ventilator. |
| 15 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 16 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 150 mm |
| 17 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 300 mm weighing not less than 330 grams |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level(a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 19 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (a) Granite stone slab colour black, Cherry/Ruby red /mairune etc(i) Area of slab upto 0.70 sqm ( Granite stone placed in single piece on selfie point) |
| 20 | Supplying and fixing at site of Stainless steel round post of dia 32 mm and height 33 inch with stainless steel top 15 mm dia about 6 to 8 inch height and bottom cap as per drawing of post supplied i/c welding of MS flat Lugs in bottom of pipe, Cutting of chase in CC pavement about 40 mm depth as per design supplied etc complete as per direction of E/I.( Note :- Nothing to be paid extra) |
| 21 | Supplying and fixing at site of stainless steel round tube of dia. 20 mm of standard make for middle horizontal section of railing and fixed in steel post by welding etc. complete as per design supplied and direction of E/I. |
| 22 | Supplying and fixing at site of stainless steel round tube of dia. 40 mm of standard make for top horizontal section of railing and fixed in steel post by welding etc. complete as per design supplied and direction of E/I. |
| 23 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (a) Polished Granite stone slab Black, Cherry Red, Elite Brown, Cat Eye,Mairune etc or equivalent |
| 24 | Providing and fixing stainless steel bend of 40 mm dia. at the end of stainless steel round tube as per direction of Engineer-in-charge. |
| 25 | Providing and fixing 40 mm dia PVC end cap as per direction of Engineer-in-charge. |
| 26 | Providing and fixing acrylic sheet of 2 mm thickness in windows and ventilators with aluminium flat beading of size 20x2 mm including drilling hole in existing frame (Note:- For fixed ventilator minimum number of hole for longer side=4 and minimum number of hole for shorter side=2) and fixing the same with necessary screws as per direction of Engineer-in- charge. |
| 27 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 28 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a) Twin rubber stopper |
| 29 | Providing and fixing sliding wheel for aluminium sliding shutter |
| 30 | Cutting fittings of existing steel glazed window by cutter machine for fixing of sliding window without dismantling of frame of existing steel glazed window as per direction and satisfaction of Engineer-in-charge and site requirement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender