Tender For Renovation Of Inspection Bungalow, Main Gate , Staff Toilet Sanitary Work,Electrical Work And Landscapping & Furniture Work At Old Inspection Bungalow(I.B.),Rukka, Ranchi Under D.W. & S. special repair Head Works Division Ranchi For The Ye
Tender Value
85.35 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
7 days left
EMD
1.71 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Inspection Bungalow, Main Gate , Staff Toilet Sanitary Work,Electrical Work And Landscapping & Furniture Work At Old Inspection Bungalow(I.B.),Rukka, Ranchi Under D.W. & S. special repair Head Works Division Ranchi For The Year Of 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | (A)Civil Work of RENOVATION OF I.B. Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Dismantling lime terracing upto av. 50mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm |
| 6 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. |
| 7 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 8 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 10 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 11 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litre/10 sqm, complete as the direction of Engineer -in-Charge. |
| 12 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 13 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 14 | Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. |
| 15 | Providing and laying Vitrified tiles in floor/wall in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 800 x 1200 mm |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm |
| 17 | Providing and laying vitrified Cool Roof tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 154557-2007 / 15013006, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. Its solar reflective index ( SRI ) value should be above 78. complete. Size of Tile 300x300 mm x10 mm thick. Parking Tiles (industrial Tiles) |
| 18 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm f or Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. |
| 19 | Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 21 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes |
| 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 24 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete |
| 25 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 26 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick |
| 28 | Supplying Fitting Fixing all height Cupboard partition of 19 mm thick water proof ply(centure panic Pine wood, ISI Mark,Termites) both side 1.5 mm thick water proof laminate (green decor wood) finishing all complete including all taxes and royalty all complete as per building specification and direction E/I. |
| 29 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 30 | Providing and fixing bright finished brass handles with screws etc. complete: 125 MM |
| 31 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 32 | Providing and applying Thermoflex P-111 /Sika Coolcoat or any other Equivalent compound on Roofs of Slab as per following procedure- |
| 33 | Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm |
| 34 | SITC Zebra Blind all complete as per building specification and direction of E/I. |
| 35 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 36 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 37 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 38 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 39 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 40 | Carriage of materials BricK |
| 41 | Sand lead |
| 42 | Stone metal lead |
| 43 | (B) Sanitary & Water Supply WorksProviding and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.Horizontal non-return valve |
| 44 | Vertical non-return valve (iv) 32mm dia weight not less than 600gms. |
| 45 | Providing and fixing 15mm dia and 45cm. Long P.V.C. Connection pipe with heavy quality brass coupling at both ends etc. All complete as per specification and direction of Engineer-in-charge. |
| 46 | Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.125 mm thick wall |
| 47 | 250 mm thick wall |
| 48 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.(ii) 450mm X 300mm size mirror |
| 49 | (ii) C.P. Brass dish container medium quality with screw and hinges etc. |
| 50 | (a) glass shelf with C.P. Brass rail. (ii) 450X125mm glass shelf complete |
| 51 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.(xxi) Towel Rail24\\" |
| 52 | Supplying materials and labours for constructing inspaction chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimention having 250mm wall thickness in cement morter (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee without door - 75x75x75 mm |
| 54 | Single tee without door - 110x110x110 mm |
| 55 | 75 mm bend |
| 56 | 110 mm bend |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal outer dia Pipes |
| 58 | 32 mm nominal outer dia Pipes |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes |
| 60 | 20 mm nominal outer dia Pipes |
| 61 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 62 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 63 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 64 | (C)Electrical Installation Work . Point wiring in PVC conduit, with modular type switch:- Wiring for light poinVfan poinUexhaust fan point/call bell point v/ith 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular sw'itch, modular plate suitable GI box etc as required . Group C |
| 65 | Twin Contol point wiring in PVC conduit, with modular Type switch :- Wiring for tw'in control point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way with modular switch, modular plate suitable GI box etc as required |
| 66 | Power plug wiring in PVC conduit (2 x 4 sq.mm) - Wiring for light/power plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 67 | Circuit/submain wiring in PVC conduit - Wiring for Circuit/submain wiring along with earth wire the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 sqmm. + 1x1.5 sqmm. Earth wire |
| 68 | 2x2.5 sqmm. + 1x2.5 sqmm. Earth wire |
| 69 | 2x6 sqmm. +1x6 sqmm. Earth wire |
| 70 | S/F piano type switch/socket - Supplying and fixing following piano tyep switch/socket on the existing switch box/cover including connections etc. as required.5/6 amps, one way switch |
| 71 | S/F 5/6 Amp. Switch & Socket (on boarel) |
| 72 | S/F rewireable double pole/TP&N switch disconnector - Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as required.32 amps, double pole |
| 73 | S/F busbar chamber - Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body, etc. as required.100 amps |
| 74 | S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required. |
| 75 | S/F 'B' series, MCB - Supplying and fixing following 240 volts, 'B' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connection, testing and commossioning etc. as required.6/32 amps, Single Pole |
| 76 | S/F DP MCB isolator - Supplying and fixing following rating, double pole 240 volts, isilator in the existing MCB DB complete with connections, testing and commissioning etc. as required40 amps |
| 77 | 63 amps |
| 78 | S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 79 | Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 80 | Supply of 9/10 Watt LED Bulb |
| 81 | Supply, Installation, Testing and Commissioning of following size fan 3 Blades confirming to IS:374:2019 including wiring the down rods of stranded for 230 V 50 Hz, single phase supply etc. complete as required 1200mm (48\\") BLDC 5star rating 32W Ceiling Fan |
| 82 | 16'(400mm) Wall mounted fan\\" |
| 83 | S.I.T.C of following rating LED Street lighting luminarie with pressure die cast housing and thoughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50 Hz. Luminarie shall be confirmed to IS: 10322 part-5/section-3 and shall be complete with all necessary accessories as required. 90/100W LED Street light |
| 84 | Supply of LED Batten (20/22W) |
| 85 | (D)SITC of CATEGORY \\"A\\" (DaikirN Hitachi, L.G., Voltas or equi.) 2.0Tr. 5 Star Split A.C (Inverter Type) I$1391-part-II and shall be complete with all necessary accessories as required. |
| 86 | SITC of CATEGORY \\"A\\" (DaikiN Hitachi, L.G., Voltas or equi.) 4 KVA wall mounted automadc voltage stablizer from range 140V to 280 V and shall be complete with all necessary accessories as required. |
| 87 | SITC of CATEGORY \\"A\\" (DaikiN Hitachi, L.G., Voltas or equi.) Outdoor stand for 2.0Tr Split AC and shall be complete with all necessary accessories as required. |
| 88 | SITC of Copper Tube of size 1/ 2\\" for split ac 1/1.5/2/3 tr capacity including nitride rubber insulation and shall be complete with all necessary accessories as required. |
| 89 | SITC of Drain Pipe for AC and shall be complete with all necessary accessories as required. |
| 90 | Supply of 12\\" (300mm) metal exhaust fan |
| 91 | Procurement and installation ofJaquar 20 mm Pillar Mounting Combination Tap Assembly conforming to IS:8931: Latest Jaquar 20 mm Pillar Mounting Combination Tap Assembly conforming to IS:8931: Latest Jaquar 20 mm Pillar Mounting Combination Tap Assembly conforming to IS:8931: Latest Jaquar 20 mm Pillar Mounting Combination Tap Assembly conforming to IS:8931: Latest JaquarR (JAQUAR) AS PER BUYER'S CHOICEas per direction of E/I. |
| 92 | Procurement and Installation of Jaquar 15 mm Brass Fancy Tap Jaquar (JAQUAR ANGLE STOP COCK/ VALVE 15MM FLORENTINE FLR-CHR-5053N) Product id: 5116877-80707130904 AS PER BUYER'S CHOICE as per direction of E/I. |
| 93 | Procurement and Installation ofHome Structures and Building and Construction and Manufacturing Components and Supplies Plumbing fixtures faucets or tapsCopper Alloy Fancy Taps For Bathroom - as per IS:8931 Latest (Q3 Category)Jaquar Shakti 15 stop valve with external thread AS PER BUYER'S CHOICE as per direction of E/I. |
| 94 | Procurement and Installation ofHome Structures and Building and Construction and Manufacturing Components and Supplies Plumbing fixtures sanitary ware Bathroom Water Shower (Q3 Category) Jaquar Bathroom Hand Shower ABS PLASTIC ( coronet Rectangular shape HAND SHOWER)Product id: 5116877-61545505248 AS PER BUYER'S CHOICE as per direction of E/I. |
| 95 | Procurement and Installation of Home Structures and Building and Construction and Manufacturing Components and Supplies Plumbing fixtures sanitary ware Bathroom Shakti 15 mm 2 wall Mounted Tap Jaquar (WALL MIXER WITH OVER HEAD SHOWER) AS PER BUYER'S CHOICE as per direction of E/I. |
| 96 | Procurement and Installation o Home Structures and Building and Construction and Manufacturing Components and Supplies Plumbing fixtures non sanitary residential fixtures Towel Rail / Ring for Bathroom (Q3 Category) Jaquar Towel Ring Stainless Steel(SS 304) Jaquar Towel Ring Stainless Steel(SS 304) Jaquar (CP BRASS TOILET PAPER HOLDER ACN 1153N JAQUAR) as per direction of E/I. |
| 97 | Procurement and Installation ofHINDWARE Vitreous China Sinks / Wash Basins Flat Back and Rectangle HINDWARE R (HINDWARE 9104 3 TABLE TOP BASI N) Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 98 | Procurement and Installation of Jaquar Waste Fittings For Size 32 mm for washbasin Jaquar (450MM LONG BRAIDED HOSE WITH TWO 15MM NUTS ALD-805B JAQUAR) AS PER BUYER'S CHOICE as per direction of E/I. |
| 99 | Procurement and Installation of Jaquar Waste Fittings For Size 32 mm for washbasin Jaquar (WASTE COUPLING - 32MM ALD-709 JAQUAR) )AS PER BUYER'S CHOICE as per direction of E/I. |
| 100 | Procurement and Installation of Jaquar liquid soap dispenser, Capacity 500 Milliliter JaquarR (dispensor push button) Product id: 5116877-92463669776 Country Of Origin:India AS PER BUYER'S CHOICE as per direction of E/I. |
| 101 | Procurement and Installation of coronet15 mm Brass Fancy Tap coronet 15 mm Bib Taps conforming toIS:8931;Latest ( coronet TAPS 15MM N T) AS PER BUYER'S CHOICE as per direction of E/I. |
| 102 | SITC of Mirror Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 103 | SITC of Towel Ring Leaded Brass Grade DCB-2 of IS 1264/1997 for Towel Ring coronet R Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 104 | SITC of coronet Towel Rail Cast Brass for Towel Rail coronet R (CORONET CR-121 1 CP TOWEL RAIL 600mm CI) Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 105 | SITC of coronet S-Trap Pattern 2 (fig 1A) (Vitreous China) Washdown Water Closets coronet R (CWC-965) Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 106 | SITC of PRIMA Two WayValve Chrome Plated Brass 15 1515 PRIMAR((PAR-7005) C.P Angle Cock 2 in 1 with Flange) Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 107 | SITC of Jaquar Bathroom Concealed Showers Cast Brass Grade LCB-2 of IS:292/1983 Jaquar (JAQUAR 1BY SHOWER K AND K) Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 108 | Procurement and Installation of Waiting Chair AS PER BUYER'S CHOICE as per direction of E/I. |
| 109 | Procurement and Installation of DURIAN Dinning Table AS PER BUYER'S CHOICE as per direction of E/I. |
| 110 | Procurement and Installation of Supreme furniture Plastic Chair With Arm rest Supreme furniture R (ORNATE) Product id: 5116877-20274713252 AS PER BUYER'S CHOICE as per direction of E/I. |
| 111 | SITC of Aquaguard water purifier Country Of Origin: India Product id: 5116877-99761516227 AS PER BUYER'S CHOICE as per direction of E/I. |
| 112 | SITC of Jaquar Stainless Steel ELECTRIC WATER HEATER- GEYSER - As Per IS 2082: 2018 latest ( Version-2) TankCapacity 15 Liter JaquarR (ERD-WHT-V015) Country Of Origin: India Product id: 5116877-99761516227 AS PER BUYER'S CHOICE as per direction of E/I. |
| 113 | Procurement and Installation of HTECH Inverter 2.5 KVAHTECHR (HTECH 2.5KVA INV) Product id: 5116877-45534871915 AS PER BUYER'S CHOICE as per direction of E/I. |
| 114 | ( E ) CONSTRUCTION OF TOILET Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 115 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 116 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 117 | Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 118 | Providing designation 75B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I. |
| 119 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 120 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 121 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) COLUMN |
| 122 | providing R.C.C. M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. |
| 123 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 124 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 125 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 126 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges |
| 127 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 128 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 129 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 130 | Providing Toe steel reinforcement of 8mm to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel)8mm -dia |
| 131 | 10mm dia |
| 132 | 12mm - 16mm dia @ 40% |
| 133 | S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.) |
| 134 | Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I. |
| 135 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 136 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 137 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 138 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 139 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio). |
| 140 | Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. |
| 141 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 142 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 143 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With \\"A\\" grade white 15X15cm Tiles. |
| 144 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes |
| 145 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler - 110mm |
| 146 | Bend - 110mm |
| 147 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete |
| 148 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 149 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 150 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 151 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 152 | Carriage of materialsBricks |
| 153 | Sand lead |
| 154 | Stone chips lead |
| 155 | Stone metal lead |
| 156 | Providing and fixing PTMT Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, Weighing not less then 106 gms. |
| 157 | Providing and fixing C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms |
| 158 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other l.S.S. approved make supported on painted C.l. or R.S. brackets 32mm C.l.brass waste, 15 mm dia C.l. body brass spindle stop cock of approved quality of weight not less than 350gpms, 32mm PV.C. waste pipe 750 mm long with brass coupling at oileend and making plumber joint$etc. all complete as per specification and direction of E/1. |
| 159 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 160 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 161 | Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia with 25 mm waste hole |
| 162 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 163 | Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent)(iv) Bib Cock (Long Thread) (lSl Marked) |
| 164 | (ii) Pillar Cock (Long neck) (lSl Marked) |
| 165 | (vi) Angular Stop Cock (Long Thread) (lSl Marked) |
| 166 | (xviii) Pressure adjustable shower with revolving joint |
| 167 | (xxi) Towel Rail24\\" |
| 168 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL/ SUPREME)15mm dia |
| 169 | 20mm dia |
| 170 | 25mm dia |
| 171 | Making holes in walls for laying GI pipes and restoring the same as per specification and direction of E/I. 125 mm thick wall |
| 172 | 250 mm thick wall |
| 173 | Providing and fixing GM non-return valve Horizontal type of approved as per specification and direction of E/I. Horizontal non-return valve 32 mm dia weight not less than 600 gm . |
| 174 | Providing and fixing GM non-return valve Vertical type of approved as per specification and direction of E/I. Horizontal non-return valve 32 mm dia weight not less than 600 gm . |
| 175 | Supplying materials and labours for constructing inspaction chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimention having 250mm wall thickness in cement morter (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 176 | poryrnene water storage tank of mark with covei and-sutable locking system in double layer confirming to lS: 12701-1996 with Latest revision. |
| 177 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 178 | ( F ) Construction of Septic TankEarthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling, ramming the foundation trenches, removing roots of trees shurbs all complete as per approved design building specification and direction of E/I. |
| 179 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B) |
| 180 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume) |
| 181 | Providing designation 75Bwork in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 182 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 183 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 184 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 185 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 186 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 187 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 188 | Providing Toe steel reinforcement of 10mm to 16mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel, JSPL, Electro Steel Ltd. and Vizal Steel)10mm dia |
| 189 | 12mm dia |
| 190 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I |
| 191 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 192 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 193 | Carriage of Material Bricks Lead |
| 194 | Stone chips lead |
| 195 | (G) MAIN GATE Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 196 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B) |
| 197 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 198 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 199 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 200 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 201 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 202 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 203 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 204 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 205 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 206 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 207 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) COLUMN |
| 208 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 209 | Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel) 8mm -dia @ 40% |
| 210 | 10mm dia @ 20% |
| 211 | 12mm - 16mm dia @ 40% |
| 212 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 213 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 214 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 215 | Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. |
| 216 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. |
| 217 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 218 | Carriage of materialsBricks Lead |
| 219 | Sand lead |
| 220 | Stone Chip |
| 221 | Stone Metal |
| 222 | (8A)Earth work in excavation in foundation trenches inordinary soil ( vide classification of soil item A) anddisposal of excavated earth as obtained to a distanceupto 50M including all lifts leveling ramming thefoundation treanches, removing roots of trees, andshrubs all complete as per approved design, buildingspecification and direction of E/I. |
| 223 | Earth filling in foundation trenches and plinth in layernot exceeding 150mm thick will watered rammedfully compacted and fine dressed with earth obtainedfrom excavation of foundation trenched with a leadof 50mm and lift of 1.5M all complete as per buildingspecification and direction of E/I. (Mode ofmeasurement compacted volume). |
| 224 | Filling in foundation trenches and plinth in layers. Notexceeding 150 mm thick well watered, rammed fullycompacted and fine dressed with earth obtainedafter cutting within a lead of 50 M and lift of 1.5 M allcomplete as per building specification and directionof E/I (Mode of measurement compacted volume) |
| 225 | Providing coarse clean sand in filling in foundationtrenches or plinth including ramming and watering inlayers not exceeding 150mm thick with all leads andlifts includng cost of all materials, Labour, rotalty andtaxes all complete as per building specification anddirection of E/I |
| 226 | Providing designation 75B brick work in C.M. (1:6) infoundation and plinth with approved quality of cleancoarse sand of F.M. 2 to 2.5 including providing10mm thick mortar joints, cost of screening maerials,raking out joints to 15mm depth, curing, taxes androyalty all complete as per building specification anddirection of E/I. |
| 227 | Providing designation 75B brick work in C.M. (1:6) insuperstructure with approved quality of clean coarsesand of F.M. 2 to 2.5 including providing 10mm thickmortar joints costs of screening materials,scaffolding, raking out joints to 15mm depth curingtaxes and royalty all complete as per buildingspecification and direction of E/I. |
| 228 | Providing designation 125 mm thick reinforceddesignation 75A brick work in CM (1:4) insuperstructure with approved quality of clean coarsesand of F.M. 2 to 25 including the cost of screening,carriage of materials, scaffolding , raking out joints to15mm depth, curing, taxes and royalty (but excludingthe cost of reinforcement) all complete as perbuilding specification and direction of E/I. |
| 229 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level : 1:3:6 (1Cement : 3 coarse sand (zone-III): 6 graded stoneaggregate 40 mm nominal size) |
| 230 | Providing and laying in position specified grade ofreinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement -All work up to plinth level. 1:1.5:3 (1 cement : 1.5coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) |
| 231 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutments, posts and struts etc. above plinthlevel up to floor five level, excluding cost ofcentering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3graded stone aggregate 20 mmnominal size)COLUMN |
| 232 | providing R.C.C. M-200 with nominal mix of (1:1.5:3)in band at lintel level with approved quality of stonechips 20mm to 6mm size graded and clean coarsesand of F.M. 2.5 to 3 including screening, shuttering,mixing cement concrete in mixer and placing inposition vibrating, skirting, curing, (but excluding thecost of reinforcement, taxes and royalty all completejob as per building specification and direction of E/I. |
| 233 | Centering and shuttering including strutting,propping etc. and removal of form for Foundations,footings, bases of columns, etc. for mass concrete |
| 234 | Centering and shuttering including strutting,propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers |
| 235 | Centering and shuttering including strutting,propping etc. and removal of form for Columns,Pillars, Piers, Abutments, Posts and Struts |
| 236 | Centering and shuttering including strutting,propping etc. and removal of form for Weathershade, Chajjas, corbels etc., including edges |
| 237 | Centering and shuttering including strutting,propping etc. and removal of form for Suspendedfloors, roofs, landings, balconies and access platform |
| 238 | Providing two coats of synthetic enamel paint ofapporoved shade and make over steel surfacethoroughly scaffolding and taxes all complete as perbuilding specification and direction of E/I. |
| 239 | Providing Toe steel reinforcement of 8mm to 32mmdia rods as approved design and drawing excludingcarriage of M.S. bars to work site, cutting, bendingand binding with annealed wire with cost of wire,removal of rust, placing the rods in position allcomplete as per building specification and directionof E/I. TMT Fe 500 (Only Valid for SAIL, TATA Steel,JSPL, Electro Steel Ltd. and Vizal Steel)8mm -dia @ 40% |
| 240 | 10mm dia @ 20% |
| 241 | 12mm - 16mm dia @ 40% |
| 242 | S/F M.S. grill made of 20 x 6mm M.S. flat as perapproved design and drawing, properly fabricatedwith joints continous fillet welded and finishedsmooth, carriage of grill to work site, hoisting as perbuilding specification and direction ofE/I. (Wherematerials is not supplied by the deptt.) |
| 243 | Supplying, fitting and fixing M.S. grill gate with M.S.grill made of 20X6mm M.S. flats or 16mm M.S.square bars fitted on 25X25X6mm M.S. Angle frameof size 60X60X6mm. Including cost of fabrication,providing necessary locking arrangement with haskaland domny duly fixed in P.C.C. (1:2:4) blocks ofrequired size applying a priming red lead paint oversteel work, taxes all complete as per drawingspecification and direction of E/I. |
| 244 | Providing and fixing fan hooks of 16mm dia M.S. bar& 1 meter long, bent torequired size and shape,placed in position and fixed in the R.C.C.slab/beam atthe time ofcasting all complete as per buildingspecification and direction of E/I. |
| 245 | Providing designation 75 B one brick flat soling jointsfilled with local sand including cost of watering texesroyalty all complete as per building specification anddirection of E/I. |
| 246 | Providing 12mm thick cement plaster (1:6) with cleancoarse sand of F.M. 1.5 including screening, curingwith all leads and lifts of water, scaffolding taxes androyalty all complete as per specification and directionof E/I. |
| 247 | Providing 6mm cement plaster (1:4) in celling withclean coarse sand of F.M. 1.5 including screening,curing with all leads and lifts of water, scaffoldingtaxes and royalty all complete as per buildingspecification and direction of E/I. |
| 248 | Providing and applying white cement based putty ofaverage thickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface toprepare the surface even and smooth complete. |
| 249 | Providing two coats of plastic emulsion paint ofapproved shade and make over a coat of cementprimer over new surface including preparingplastered surface by rubbing smooth with pumicestone or fine sand paper, applying putty whereverrequired, scaffolding washing of floor and taxes allcomplete as per building specification and directionof E/I. |
| 250 | Providing primer one coat of red lead paint ofapproved make over new steel surface includingpreparing the surface after cleaning, removing dust,dirt, scales smokes and grease and cleaning thesurface thoroughly including cost of scaffolding andtaxes all complete as per building specification anddirection of E/I. (Mode of measurement Area shall bemultiplied by the co-efficient as indicated in buildingspecificatio). |
| 251 | Providing and fixing on wall face unplasticised RigidPVC rain water pipes conforming to IS:13592 Type A,including jointing with sea; ring conforming toIS:5382, leaving 10mm gap for thermal expansion,Single socketed pipes |
| 252 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Coupler - 110mm |
| 253 | Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain waterpipes by means of 50x50x50 mm hard wood plugs,screwed with M.S. screws of required length,including cutting brick work and fixing in cementmortar 1:4 (1 cement : 4 coarse sand) and makinggood the wall etc. complete |
| 254 | Providing & Applying high quality acrylic modifiedresin based texture of Dholpur/Red sand stonePattern with anti algae and UV resistance propertiesto be applied as intermediate finish in desiredpattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mmthickness after scrapping and properly cleaning thesurface to remove loose particles from the plastersurface, followed by top coating with Premium AcrylicSmooth exterior paint with Silicone additives ofrequired shade by two or more coats @ 1.43 litre/10sqm, complete as the direction of Engineer -in-Charge. |
| 255 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size) over 75mmthick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted withfine sand, including necessary excavation, levelling& dressing & finishing the top smooth. |
| 256 | Providing 250mm. Wide brick drain in cement mortar(1:6) with av. 150mm clear depth and 250mm apronincluding cost of eartwork involved with 75mmcement concrete (1:4:3) over one brick designation75A flat soling in proper grade and slope at the basethe drain duly plastered in C.M. (1:3) with punningover exposed surface all complete as per buildingspecification and direction of E/I. |
| 257 | Providing and laying 6mm precast white glazed tiles in walls over12mm cement mortar (1:3) and jointed with grey cement slurryflush pointing with white cement including rubbing, polishing andcost of curring taxes and royalty all complete as per buildingspecification and direction and E/I. With \\"A\\" grade white15X15cm Tiles. |
| 258 | Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in colours such asWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cementslurry @ 3.3 kg/sqm including pointing the joints with whitecement and matching pigment etc., complete. |
| 259 | Providing and laying Vitrified tiles in floor/wall in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Layingof tiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily. Glazed Vitrified tiles Matt/Antiskidfinish of size Size of Tile 800 x 1200 mm |
| 260 | Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid door/window/Clerestory windows &other Frames/ Chowkhat comprising of virgin PVC polymer of Kvalue 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/ wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 gms) fabricatedwith miter joints after applying PVC solvent cement and screwedwith full body threaded star headed SS screws having minimumframe density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modulus of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of beingtermite/borer proof, water/moisture proof and fire retardant andfixed in position with M.S hold fast/lugs/SS dash fasteners ofrequired dia and length complete as per direction of Engineer-In-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid forseparately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shallbe acceptable. Variation in profile dimensions on plus side shallbe acceptable but no extra payment on this account shall bemade. |
| 261 | Providing and fixing factory made single extruded WPC (WoodPolymer Composite) solid plain flush door shutter of required sizecomprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ ricehusk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cumand screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity850 N/mm2 and resistance to spread of flame of Class A categorywith property of being termite/borer proof, water/moistureproof and fire retardant and fixing with stainless steel butt hingesof required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S.Sscrews shall be paid separately) 35 mm thick |
| 262 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubularsections/ appropriate Z sections and other sections of approvedmake conforming to IS: 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling upthe gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beadingfor glazing / panelling, C.P. brass / stainless steel screws, allcomplete as per architectural drawings and the directions ofEngineer-in-charge. (Glazing, paneling and dash fasteners to bepaid for separately) : For shutters of doors, windows &ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall bepaid for separately) |
| 263 | Providing and fixing glazing in aluminium door,window, ventilator shutters and partitions etc. withEPDM rubber / neoprene gasket etc. complete as perthe architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beadingshall be paid in basic item): With float glass panes of4.0 mm thickness (weight not less than 10kg/sqm) |
| 264 | Carriage of materials Bricks Lead |
| 265 | Sand lead |
| 266 | Stone chips lead |
| 267 | Stone metal lead |
| 268 | GOOD EARTH ( |
| 269 | (8B) Point wiring in PVC conduit, with modular type switch:-Wiring for light poinVfan poinUexhaust fan point/call bellpoint v/ith 1.5 sq.mm FR PVC insulated copper conductorsingle core in surface/recessed PVC conduit, with modularsw'itch, modular plate suitable GI box etc as required . GroupC |
| 270 | Twin Contol point wiring in PVC conduit, with modular Typeswitch :- Wiring for tw'in control point with 1.5 sq.mm FR PVCinsulated copper conductor single core cable insurface/recessed PVC conduit, 2 way with modular switch,modular plate suitable GI box etc as required |
| 271 | Power plug wiring in PVC conduit (2 x 4 sq.mm) -Wiring for light/power plug with 2 x 4 sq.mm. FR PVCinsulated copper conductor single core cable for loop earthingas required. |
| 272 | Circuit/submain wiring in PVC conduit -Wiring for Circuit/submain wiring along with earth wire thefollowing sizes PVC insulated copper conductor, single corecable in surface/recessed PVC conduit as required.2x1.5 sqmm. + 1x1.5 sqmm. Earth wire |
| 273 | 2x2.5 sqmm. + 1x2.5 sqmm. Earth wire |
| 274 | 2x6 sqmm. +1x6 sqmm. Earth wire |
| 275 | 2 x10sqmm. +1x10 sqmm. Earth wire |
| 276 | S/F Modular type switch/ socket : Supplying and fixing offollowing modular switch / soket on the existing modularplate & switch box including connections but excludingmodular plate etc. as required.5/6 amps, one way switch |
| 277 | 5/6 amps, 3 pin socket outlet |
| 278 | 15/16 amps, 6 pin socket outlet |
| 279 | S/F rewireable double pole/TP&N switch disconnector -Providing and fixing following capacity double pole/TP&Nsheet metal switch disconnector fuse unit in existing metalboard with rewireable type fuses, including drilling holes inmetal board, making connections, etc as required. |
| 280 | S/F busbar chamber -Providing and fixing following capacity busbar chamber with 4strips of suitable size made of copper, heavy duty, completewith all accessories including connections, earthing the body,etc. as required. |
| 281 | S/F Batten / Angle Holder:- Supplying and fixing batten / angleholder including connection etc as required. |
| 282 | S/F 'B' series, MCB -Supplying and fixing following 240 volts, 'B' series, miniaturecircuit breaker suitable for inductive loads of following polesin the existing MCB DB complete with connection, testing andcommossioning etc. as required. |
| 283 | S/F DP MCB isolator -Supplying and fixing following rating, double pole 240 volts,isilator in the existing MCB DB complete with connections,testing and commissioning etc. as required40 amps |
| 284 | 63 amps |
| 285 | S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose onthe existing junction box/ wooden block including connectionetc as required. |
| 286 | Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia includingaccessories, and providing masonry enclosure with coverplate having locking arrangement and watering pipe etc. withcharcoal and salt as required. |
| 287 | Supply of 9/10 Watt LED Bulb |
| 288 | ceilins fan 48\\" (1200mm) |
| 289 | S.I.T.C of following rating LED Street lighting luminarie withpressure die cast housing and thoughened glass cover (IP 66protection) in existing pole/pipe for supply voltage 100-270VAC, 50 Hz. Luminarie shall be confirmed to IS: 10322 part-5/section-3 and shall be complete with all necessaryaccessories as required. 90/100W LED Street light |
| 290 | SITC of CATEGORY \\"A\\" (DaikirN Hitachi, L.G., Voltas or equi.)2.0Tr. 5 Star Split A.C (Inverter Type) I$1391-part-II and shallbe complete with all necessary accessories as required |
| 291 | SITC of CATEGORY \\"A\\" (DaikiN Hitachi, L.G., Voltas or equi.) 4KVA wall mounted automadc voltage stablizer from range140V to 280 V and shall be complete with all necessaryaccessories as required. |
| 292 | SITC of CATEGORY \\"A\\" (DaikiN Hitachi, L.G., Voltas or equi.)Outdoor stand for 2.0Tr Split AC and shall be complete withall necessary accessories as required |
| 293 | SITC of Copper Tube of size 1/ 2\\" for split ac 1/1.5/2/3 trcapacity including nitride rubber insulation and shall becomplete with all necessary accessories as required. |
| 294 | SITC of Drain Pipe for AC and shall be complete with allnecessary accessories as required. |
| 295 | Supply of LED Batten (20/22W) |
| 296 | Supply of 12\\" (300mm) metal exhaust fan |
| 297 | (8C) Providing and fixing G.M. non return valveHorizontal/Vertical type of approved quality as perHorizontal non-return valve - 25 mm dia |
| 298 | Vertical non-return valve (iv) 32mm dia weight not less |
| 299 | Providing and fixing 15mm dia and 45cm. Long P.V.C.Connection pipe with heavy quality brass coupling at bothends etc. All complete as per specification and direction ofEngineer-in-charge. |
| 300 | Making holes in walls for laying G.I. pipe and restoring thesame after pipe laying as per specification and direction125 mm thick wall |
| 301 | 250 mm thick wall |
| 302 | Supplying, fitting and fixing the following items completewith all materials as per specification and direction of E/I.450mm X 300mm size mirror |
| 303 | C.P. Brass dish container medium quality with screwand hinges etc. |
| 304 | glass shelf with C.P. Brass rail. |
| 305 | special type C.P. Bath room Fitting for V.I.P.Buildings(JAL,Jaquar, Mark or Equivalent)Bib Cock |
| 306 | Pillar Cock |
| 307 | Angular Stop Cock |
| 308 | Pressure adjustable shower with revolving joint |
| 309 | Towel Rail24\\" |
| 310 | Providing and fixing floor mounted, white vitreous chinasingle piece, double traps syphonic water closet ofapproved brand/make, shape, size and pattern includingintegrated white vitreous china cistern of capacity 10 litrewith dual flushing system, including all fittings and fixtureswith seat cover, cistern fittings, nuts, bolts and gasket etcincluding making connection with the existing P/S trap,complete in all respect as per directions of Engineer-in-Charge. |
| 311 | Supplying materials and labours for constructinginspaction chamber of designation class 75B bricks size750mm deep, 600X450mm internal dimention having250mm wall thickness in cement morter (1:6) including12mm cement plaster (1:4) with punning on inside andcement plaster (1:6) with 600X475mm G.I. cover withframe (weight not less than 36kg.) alongwith earth work inexcavation and 80 mm thick P.C.C. (1:3:6) in foundationand refilling all complete as per specification and directionof E/I. |
| 312 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised Rigid PVCrain water pipes conforming to IS : 13592 Type A, includingjointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion.Single tee without door |
| 313 | Single tee without door |
| 314 | 75 mm bend |
| 315 | 110 mm bend |
| 316 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, includingfixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solventcement and testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall25 mm nominal outer dia Pipes |
| 317 | 32 mm nominal outer dia Pipes |
| 318 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixingthe pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solventcement and the cost of cutting chases and making goodthe same including testing of joints complete as perdirection of Engineer in Charge.Concealed work, including cutting chases and making goodthe walls etc.15 mm nominal outer dia Pipes |
| 319 | 20 mm nominal outer dia Pipes |
| 320 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank, IS : 12701 marked, withcover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank. |
| 321 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x45 cm dry brick honey comb shaft with bricks and S.W.drain pipe 100 mm diameter, 1.8 m long complete as perstandard design. |
| 322 | 9 Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 323 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 324 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litre/10 sqm, complete as the direction of Engineer -in-Charge. |
| 325 | Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 326 | Structural steel work in single section, fixed with or without connecting plate. including cutting, hoistin& fixing in position and applying a priming coat of approved steel primer all complete. |
| 327 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 328 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm. removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. B. In area of thorny jungle |
| 329 | Carriage of materialsSand lead = 10 km |
| 330 | SITC of Surya Led Bollard Light Country Of Origin: India AS PER BUYER'S CHOICE as per direction of E/I. |
| 331 | Matresses |
| 332 | Bedsheet |
| 333 | Pillow |
| 334 | Blanket |
| 335 | Wooden Almirah |
| 336 | 4 Seater |
| 337 | 2 Seater |
| 338 | 1 Seater |
| 339 | Centre Table |
| 340 | Door mat |
| 341 | Floor carpet |
| 342 | Door Pining |
| 343 | Confrence Table of Size 15' X 7' X 2.5' |
| 344 | Mid back Chair |
| 345 | Fibre chair with arm |
| 346 | TV 55\\" |
| 347 | Curtains |
| 348 | Refrigerator |
| 349 | Kitchen ware |
| 350 | Modular Kitchen |
| 351 | GST 18% |
| 352 | Labour Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender