Tender For Augmentation Of Lwss Seola Manjot Pandoh In Tehsil Sadar Distt. Bilaspur (H.P.). (Sh: Laying, Jointing & Testing Of Gms Rising Main 100Mm (H.C.) For Newly Constructed Tank)Dnit Amount- 201598/- Emd- 4050/- Time- One Month
Tender Value
2.01 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
3 days left
EMD
4050
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Lwss Seola Manjot Pandoh In Tehsil Sadar Distt. Bilaspur (H.P.). (Sh: Laying, Jointing & Testing Of Gms Rising Main 100Mm (H.C.) For Newly Constructed Tank)Dnit Amount- 201598/- Emd- 4050/- Time- One Month
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. In earth work in all setc. In earth work in all kinds of soil such as kankar moorum, Shingles conglomerate saturated soil decomposed or soft rock & hard rock by bisting including dressing of sides and beds, disposing of excavated earth with all leads and lifts disposed earth to be levelled and neatly dressed and and then returning the stacked soil in to foundation and trenches, etc. including ramming and consolidating same same whe whereever required with all all leads, leads, lift and including jungle clearance and as per the direction of the Engineer in charge |
| 2 | Pick Jumper Work |
| 3 | Laying jointing of below mentioned GMS tube with 1% joint flanged with MS flange (is 6392-1971) & remaining joint of Butt welding complete in all respect within all leads & lifts as per entire satifaction of engineer in charge (the cost of Flanges butt welds joint to be measured & paid for separately) |
| 4 | 100mm dia. (H.C) |
| 5 | Providing & welding of MS flanges at suitable point cofirming to following table as per is ( is:6392-1971) (latest with upto date amendments) with ta plain end GMS/MSERW pipe in requsite number of layers on both faces to make the joint leak proof (the cost of providing and laying of GMS/MSERW pipe to be measured and paid for seprately). the welding of flanges should conforn to is:816-1969 with electrodes as per is:814-1991 and required of nuts and bolts conforming ti is:1364, including the cost of gasket sheet not less then 3.00mm conforming to is:2712-1998. the work shall be done to the entire satisfaction of the engineer-in-charge wiht in all lead and lift. |
| 6 | Flange T-5 100mm dia. |
| 7 | Providing circumferential Butt welded joints by electrical arc welding to GMS/MSERW pipe, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to 15: 816-19specifications, by using welding electrodes conforming to IS:814-1991, at site of work complete in all respects including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. (Including Bends) |
| 8 | 100 mm dia |
| 9 | Providing and Fixing cast Steel Reflux valve of 100 mm dia of class CL-150, as per ASA 600 Leader/Kirloskar make i/c MS flange of Table-17 as per IS 6392-1971 with welding of MS flanges in two layer on both faces including carriage complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer in Charge |
| 10 | 100 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender