Tender For Remodeling Of Lis Malothi Smog Chhakoh Etc. In Tehsil Sadar Distt. Bilaspur (Sh:- Repair Of Existing Feeder Channel From Rd 0/0 To 134, Construction of Retaining Wall For Protecting The Feeder Channel At Various Rd, Extraction Of The Silt
Tender Value
4.13 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
6 days left
EMD
8300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remodeling Of Lis Malothi Smog Chhakoh Etc. In Tehsil Sadar Distt. Bilaspur (Sh:- Repair Of Existing Feeder Channel From Rd 0/0 To 134, Construction of Retaining Wall For Protecting The Feeder Channel At Various Rd, Extraction Of The Silt And Providing And Laying Kota Stone Floor).Dnit Amount- 413907/- Emd- 8300/- Time- Two Months
BOQ
| Sl. No. | Item Description |
| 1 | Demolition below G.L. up to 1.50 mtrs depth and disposal of uncerviceable materials within 20 mtrs lead un-reinforced cement concrete up to 15cm thickness within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 3 | Cement concrete lining 15cm thick or less for Irrigation channels, using cement concrete 1:3:6 |
| 4 | Hand mixed concrete lining in bed |
| 5 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.15mm thickwithin all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 6 | Removal/Cleaning of all kind of silt cum soil, sand etc. within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 7 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 8 | Kota stone slab flooring 20mm (average thick base of cement mortor 1:4 (1cement: 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm thick within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 9 | Excavation in foundation & trenches etc. in earth work including all kinds of soil such as pick work Jumper work, blasting soft and hard rock,conglomirate up to all laeds and lifts stacked the excavated soil not more than 3mtrs. clear from the edge of excavation and then returning the stacked soil in trenches consolidating each deposited layer by ramming and watering and then desposing of all surplus excavated earth as directed by the Engineer-in-Charge. |
| 10 | Providing laying cement concrete 1:6:12 (1Cement: 6Sand: 12Graded stone agreegate 40mm nominal size) curing complete excluding cost of form work in foundation and plinth within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 11 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to a fair finish including centering & shuttering and propping etc. with wooden battens and bllies, height of propping and centering below supporting floor to cielling not exceeding 4mtrs. removal of the same for insitu RCC and PCC work in flat surfaces such as sofits, suspended floors, roofs, landing and the like floors etc. 200mm thickness within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 12 | Vertical portion like walls etc. |
| 13 | Providing laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40 mm nominal size) & curing complete in foundation & plinth within all leads and lifts and to the entire satisfaction of the Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender