Tender For Balance Work Additional Alteration Work In Hp.Pwd Rest House At Jaisinghpur Distt. Kangra (Hp) (Sh:-C/O Main Building, Water Supply And Sanitary Installation)
Tender Value
11.31 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
4 days left
EMD
22700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Additional Alteration Work In Hp.Pwd Rest House At Jaisinghpur Distt. Kangra (Hp) (Sh:-C/O Main Building, Water Supply And Sanitary Installation)
BOQ
| Sl. No. | Item Description |
| 1 | Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 2 | Providing wood work in frames of doors, windows, clearstory, windows and other frame wrought, framed and fixed in position.Ist class DD wood and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge.2nd Class DD Wood and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 5 | Providing and fixing M.S. grills of required pattern in steel frames of windows etctera with M.S. flats, square or round beaded bolts and nuts or by screw. Plain grill including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 6 | Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm (Three hundred fifty into sixteen millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 7 | Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm (Two hundred fifty into sixteen millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 8 | Providing and fixing aluminum tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm (Two hundred fifty into ten millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 9 | 150x10 mm (one hundred fifty into ten millimetre) |
| 10 | Providing and fixing aluminum handles, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etctera complete125mm (one hundred twenty five millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 11 | 100 mm (one hundred millimetre) |
| 12 | Providing and fixing oxidized M.S. casement stays (straight peg type) 200mm (Two hundred millimetre) weighining not less than 120 gms one hundred twenty gram) with necessary screws etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 13 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etctera wher ever necessary complete 20 mm (twenty millimetre) dia and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 14 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 15 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 16 | Providing and laying double charge vitrified floor tiles sizes 600x600 mm (six hundred into six hundred millimetre) of AGL/Bell/Orient/Nitco /Kajaria tiles NTC (thickness to be specified by the manufacturer) with water absorption less than 0.08 percent and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry at the rate of 3.3 (three point three) Per Kilogram/ Per Square Metre including grouting the joints with white cement and matching pigments etctera complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 17 | Providing and laying 300x300 mm (three hundred into three hundred millimetre) antiskid cremic glazed tileNitco/AGL/Rak/Simpolo/Kajaria/Somany/Jonson/ Bell having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 18 | Providing and fixing pre-painted sheet ridge or hips 60cm (sixty centimetre) over all of kotar metal skin trapezoidal profiled sheeting 0.60mm cover with over all width 1126mm (one thousand one hundred twenty six) 28mm (twenty eight) crest depth at 353mm (three hundred fifty three) 2mm (two millimetre) C/C crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.5mm (two decimal five millimetre) the main crest with at top zinc waiting top coat with regular modified polyster coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 550mm (five hundred fifty millimetre) length with DPDM seal complete in all respect as per approved drawing design. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 19 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete :The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST |
| 20 | Providing and fixing 15 cm (fifteen centimetre) wide, 45 cm (forty five centimetre) overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm (zero point six three millimetre) thick with zinc coating not less than 275 gm/m² (two hundred seventy five gram per square metre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( Ten millimetre) gap for thermal expansion, (i) Single socketed pipes. 110 mm (one hundred ten millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 22 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( Ten millimetre) gap for thermal expansion. Bend 110 mm (one hundred ten millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 23 | Plain Shoe 110 mm (one hundred ten millimetre) |
| 24 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. :100 mm and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 25 | Providing and fixing 595x595x6 mm (five hundred ninety five into five hundred ninety five intosix millimetre) designer board of everest ( E-Board) ceiling with pre-painted GI channel framing at the rate 600 mm C/C complete as per specification and direction of Engineer-in-Charge.and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 26 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 27 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied at the rate 0.90 ltr/ 10 sqm over an under coat of primer applied at the rate 0.80 ltr/ 10 sqm of approved brand and manufacture and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 28 | 15mm (fifteen millimetre) cement plaster in single coat on fair side of brick/ stone masonry for interior plastering upto floor two level with CM 1:6 (One cement : six sand) carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 29 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 30 | Finishing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Exterior and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 31 | Applying white care wall putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. Up to any lead and lift and other incedentals and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 32 | Wall painting with Premimum acrylic emulsion of Asian Paints/Nerolac Paint/Berger paint /Dulex paint of approved brand and manufacture to give an even shade :Interior and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 33 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 34 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied at the rate 0.90 ltr. (zero point nine zero liter /10 (ten) Per Square Metre. Over an under coat of primer applied at the rate 0.75 ltr (zero point seven five)/ 10 (ten) Per Square Metre. of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 35 | 19 mm (nineteen millimetre) thick polished grey Polished grey /cheema pink Granite nosing round flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etctera. all complete as specified and as directed by the Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 36 | Providing and fixing Unistone slab 12.50 mm (twelve desimal five zero)clading on RCC RCC surface side on face and porch masonary wall etc. In 12 mm thick cement plaster 1:3 (one cement : 3 sand) and jointed with cement slurry including scafolding etctera complete in all respect.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing white viterous china pedestial tpye water closet EWC of cube no 20092 of size 61.5x34.5x40 cm ( European type)of Cera/Jaquar od star white /Snow white shade with Jet pressure and with 10 litre low level PVC flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required of Hindware or Equavalent including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 38 | Providing and fixing wash basin with C.I. brackets, of NEPTUNE NO 10072 of size 50x48x86 CM with pedestial of HINDWARE/CERA/JAQUAR or euqavalent with, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China.including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing wash basin with C.I. brackets, of NEPTUNE NO 10072 of size 50x48x86 CM with Venity of HINDWARE/CERA/JAQUAR or euqavalent with, 32 mm C.P. brass waste of standard pattern, water proof painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China.including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 40 | Providing and fixing 32 mm (thirty two millimetre) dia P.V.C. waste pipe of Supreme/finolex/prince for sink or wash basin including P.V.C. waste fittings complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 41 | Providing and fixing 100mm (one hundred millimetre) dia CP iron grating of Jal/Jaguar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 42 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 43 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror superior glass of Atul/Modi Gaurd (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 44 | Providing and fixing PTMT towel rail of Jal/Jaquar/ ESS ESS / cera/ hindware complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre) , width 78 mm (seventy eight millimetre) and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 gms (one hundred ninety grams) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge .The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 45 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etc.,complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 46 | Providing and fixing chromium plated brass soap dish of of hindware/cera/Jal / Jaquar/ ESS ESS or contra with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 47 | Providing and fixing 15mm (fifteen millimetre) diameters C.P. brass long nose bib cock of Jal/Cera/Hindware/Jaquar or equivalent single control including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 48 | Providing and fixing brass stop cock (concealed) of standred design and app. F-330043 of Jal/Cera/Hindware/Jaquar approved quality 15mm (fifteen millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 49 | Providing and fixing uplasticised PVC connection pipe with brass unions :15 mmin (fifteen millimetre) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 50 | Providing and Fixing wall mixer F-330019 of HINDWARE / Jaquar approved quality 15mm (fifteen millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 51 | Providing and Fixing wash basin Mixer F-330014 of HINDWARE /Jaquar approved quality 15mm (fifteen millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 1000 (one thousand ) liter IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 53 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etctera with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete 1216 (16 mm OD) pipe as per direction of the Engineer in charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 54 | 1620 (20 mm OD) pipe |
| 55 | Providing and fixing high pressure PVC spigot of supreme / Finolex / Prince class B conforming to BS-13592 soil, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete including carriage of material in all leads and lifts and other incidentals complete 75 mm (seventy five millimetre) Dia and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 56 | 110 mm (one hundred ten millimetre) Dia |
| 57 | Providing and fixing PVC Single Equal Branch of Supreme / Finolex / Prince ISI marked with oval asses ISI Marked insertion rubber washer 3 mm (three millimetre) thick bolt and nuts complete i/c fixing with approved adhesive etc. Complete including carriage of material in all leads and lifts and other incidentals complete75 mm (seventy five millimetre) Dia and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. |
| 58 | 110 mm (one hundred ten millimetre) Dia |
| 59 | Providing and fixing ISI marked of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etc. Complete for size 110x75 mm.(one hundred ten into seventy five millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, and all type of other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender