Tender For Sub Head Dismentalling Relaying Jointing And Testing Of Gi Pipe Desilting Of Trench Weir And Refixing Of Pipe With Butt Welding In Binwa Khad Damaged Due To Chocked Pipe
Tender Value
5.61 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
1 days left
EMD
11500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sub Head Dismentalling Relaying Jointing And Testing Of Gi Pipe Desilting Of Trench Weir And Refixing Of Pipe With Butt Welding In Binwa Khad Damaged Due To Chocked Pipe
BOQ
| Sl. No. | Item Description |
| 1 | Extraction of silt removal of debris ,boulders and rocky portion requiring blasting upto a distance of 20 metre disposing of unserviceable materials, and neatly dressing the surface complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 2 | Demolition of Below Ground Level upto 1.50 meters depth including stacking of serviceable material and disposal of unserviceable material within 20 meters lead and including cutting the necessary RCC / RB etc. Complete . Reinforcement cement concrete more than 15 cm thickness complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 3 | Dismentalling of existing pipe line of following dia. (Earth work in trenches to be measured and paid for separately) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 4 | 150 mm dia. |
| 5 | Relaying, jointing and testing in trenches galvanised mild steel tube of Medium grade Plain end Pipe complete including providing and fixing tube fitting such as union, tees , socket etc.(excluding cost of earth work in trenches , will be measured and paid for separately ). complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge |
| 6 | 150 mm dia. |
| 7 | Providing and fixing of cast Iron double flange sluice valve of following diameter heavy duty PN-1.6 of Kartar/Bir/ Kirloskar/ leader Make including cost of nuts bolts rubber sheet 4mm thick entire carriage and welding of flange T-5 of both end in double end in double layerof GI Pipe testing of joints at site confirming to IS:14846 latest with upto date ammendaments complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 8 | 100 mm dia |
| 9 | 150 mm dia. |
| 10 | 300 mm dia. |
| 11 | Providing and welding MS flanges @ 5% of total joint conforming to following tables as per IS 6392-1971 (Last with upto date amendments) with plan end G.I/MSERW pipe in three (One inner and two outer) number of layers on both faces to make the joint leak proof (The cost of providing and laying of GI pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00 mm conforming to IS 2712-1998. The work shall be done tothe entire satisfaction of engineer in charge within all leads and lifts Flange Table- 5 |
| 12 | 100 mm dia |
| 13 | 150 mm dia. |
| 14 | 300 mm dia. |
| 15 | Providing Circumferencial Butt welded joints by electrical arc welding ( welding thickness equal pipe thickness ) of following dia of GI pipe, the butt welded joints as per table below duly welded in three layes ( one inner and two outer ) with pipes at both ends as per relevent BIS standards along with nuts and bolts of required sizes confirming to BIS 1364 ( with upto date ammendments), welded in requsite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications , by using welding electrodes of 2.5mm to 6.30mm of Advani Oerlikon (Adore) CITOJETE / ESAB make conforming to IS 814-1991, at site of work complete in all respects, including manual/machanical handling of pipes of following dia :- |
| 16 | 100 mm dia |
| 17 | 150 mm dia. |
| 18 | 300 mm dia. |
| 19 | Steel work in single section including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guards bars, Ladders, railings, brackets and similar works complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender