Tender For Special Repairs To Boys And Girls Toilet At Government Higher Secondary School At Oomapalayam In Coimbatore District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Boys And Girls Toilet At Government Higher Secondary School At Oomapalayam In Coimbatore District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling clearing away the DOORS AND WINDOWS including removal of frames,hinges and fastening etc., complete complying as directed by the departmental officers as per standard specification. |
| 2 | Dismantling clearing away the damaged Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs and carefully stacking materials useful for reuse etc, as directed by the departmental officers as per standard specification |
| 3 | Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Flooring with ceramic tiles of size 305 X 305 X 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 5 | Dadooing walls with following best approved quality, colour glazed tiles conforming to IS 15622 of size 300 X 600 X 10mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Manufacturing supplying and fixing of Fully Panelled steel door (SINGLE LEAF) with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf |
| 7 | PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Providing granolithic floor finish of the 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 9 | Renewing and fixing in best WHITE glazed earthenware Oriya type INDIAN WATER CLOSET of approved quality of size 580x 440mm with ‘P’ or ‘S’ trap conforming to BIS with sand cushion and forming flooring alround the closet using 40 mm brick jelly lime concrete 1:2:5 (One lime, two sand and five brick jelly) 10mm thick and finishing the top to the required slope and including giving connection to the C.I. soil pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) including with all necessary accessories fixin in position and dismantling masonry floor or RCC works and redoing the same to the original condition without any leakage etc., as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on work). |
| 10 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/U bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying , fixing and roofing with Polycarbonate sheet 6mm thick with all necessary accessories such as J/U bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 12 | Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by the departmental officers. |
| 13 | Renewing and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 14 | PLAIN CEMENT CONCRETE 1:2:4 (One cement, two M - sand and four aggregate) using 20 mm gauge hand broken hard granite stone jelly for WEARING COAT including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification. |
| 15 | Supplying and fixing fine polished cuddapah slab of 20/30mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers |
| 16 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 17 | Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 18 | 11.50cm Thick FOR SUPERSTRUCTURE IN GROUND FLOOR. |
| 19 | Supplying. Fabricating and fixing of M S GRILL for open court yard grill, grill work to doors, windows and ventilators with required size and angles including with necessary M.S. Channels, ' L ' angles, M.S. Plate as per the approved special designed including cost of materials and labour charges for cutting angle, welding charges including cost of welding rod conveyance charges at site of work including cost of one coat of red oxide primer etc., complete and as directed by the departmental officers. |
| 20 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using 20mm HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. |
| 21 | Manufacturing, supplying fixing of RCC PRECAST RING of 1.20m diametre of slab 0.30m height in cement concrete 1:2:4(One cement, two M - sand and four aggregate) using 20mm gauge hard broken granite stone metal including cost of moulding and including cost of reinforcement of 10 to 6mm dia rod at 15cm centre to centre in both direction and plastering the top side with cement mortar 1:3(One cement and three P - sand) 6mm thick including finishing and curing etc., including cost of materials, conveyance at site of works, loading and unloading and fixing in position with all necessary accessories etc., complete complying with standard specification as directed by the departmental officers. [ The materials should be got approved by the departmental officers before execution]. |
| 22 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Above ground level. |
| 23 | 25mm diametre UPVC Pipe |
| 24 | 20mm diametre UPVC Pipe |
| 25 | 15mm diametre UPVC Pipe |
| 26 | Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements complete complying as directed by the department officers as per standard specification.Note:- Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separte provision for fixing UPVC specials needs to be allowed. |
| 27 | 20mm diametre U.P.V.C UNION. |
| 28 | 25mm diametre U.P.V.C UNION. |
| 29 | 20mm diametre U.P.V.C BEND. |
| 30 | 25mm diametre U.P.V.C BEND |
| 31 | 25 X 20mm diametre UPVC REDUCER. |
| 32 | Supplying and fixing in position best quality P.V.C. SOIL / WASTE PIPES of following sizes having I.S.I mark and providing leak proof joints including fixing to walls with Specials / PVC /MS. clamps etc., and making connection to all sanitary fittings,dismantling the masonry / RCC works wherever necessary and making good the dismantled portion to original condition etc., complete complying with standard specification.[The PVC pipe should be got approved by the Executive Engineer before use on works.] |
| 33 | 110 mm diametre PVC SOIL PIPE [ 6Kg / Cm2] |
| 34 | 75 mm diametre PVC SOIL PIPE [ 6Kg / Cm2] |
| 35 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 36 | 110 mm diametre PVC ELBOW WITH DOOR. |
| 37 | 110 mm diametre PVC BEND. |
| 38 | 75 mm diametre PVC BEND. |
| 39 | Construction of inspection chamber of clear size 0.45 X 0.45m including earth work excavation, CC 1:5:10 of 10cm thick and Fly Ash brick work in cement mortar 1:5 [one cement and five M - sand] using best quality of Fly Ash bricks of size 23 X 11X 7cm with plastering with cement mortar 1:3 [one cement and three P - sand] 12mm thick to inner and outer sides and wearing coat 1:3:6 [one cement, three M - sand and six aggregate] 15cm thick and covered with precast slab 5cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 40 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed INTERIOR (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 41 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed EXTERIOR (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 42 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint over the existing Wall in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 43 | PAINTING TWO COATS FOR NEW IRON WORKS for doors, windows and ventilators, iron bars, weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. (The paint to be used should be got approved by the Executive Engineer before use on work) |
| 44 | GST 18% (CGST AT 9% + SGST AT 9%) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender