Tender For Addition/Alteration And Improvement Of Office Space In Dtf Building At Icgas Daman
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
22 days left
EMD
89600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Daman → Daman and Diu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration And Improvement Of Office Space In Dtf Building At Icgas Daman
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door/ window/ventilator shutter with frame (without taking off shutters from frame) of any description exc. 1.50 Sqm but not exc 4.00 Sqm each etc complete all as specified and as direted. |
| 2 | M&L for 2nd class hardwood for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, Complete all as specified and directed. |
| 3 | S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. complete all as specified and directed. |
| 4 | M&L for 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work, Complete all as specified and directed. |
| 5 | M&L for 0.90 mm thick decorative laminate type 1, laminates on flat or curved surfaces in any size or width , of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.. |
| 6 | Supply only 5.50 mm thick float glass fixed in aluminium sliding window/door shutters or wooden cabinets, etc complete all sas specified and directed. |
| 7 | S&F for Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed. |
| 8 | M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails of brads ece 3 & M. ece 6 Sq.cm in 2nd class hardwood. |
| 9 | S&F for brass butt hinges, medium weight 150MM Size, fixed to chowkhat and door, complete all as specified and directed. |
| 10 | S&F for brass butt hinges, medium weight 125MM Size, fixed to chowkhat and door, complete all as specified and directed. |
| 11 | S&F for brass butt hinges, medium weight 100MM Size, fixed to chowkhat and door, complete all as specified and directed. |
| 12 | S&F for 200mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed. complete all as specified and directed. |
| 13 | S&F for 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed. complete all as specified and directed. |
| 14 | S&F for floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm. complete all as specified and directed. |
| 15 | S&F for Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 60 to 80 Kgs. complete all as specified and directed. |
| 16 | S&F for 450mm size modular brass handles modren Fency type, polished etc complete all as specified and directed |
| 17 | S&F for 150mm size extruded brass handles fabricated type, polished etc complete all as specified and directed |
| 18 | S&F for 125mm size extruded brass handles fabricated type, polished etc complete all as specified and directed |
| 19 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 20 | Supply, and fixing 30 mm thick factory made uPVC door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin- charge. |
| 21 | Demolition of Brick work or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris out side from MD land etc, Complete all as specified and directed. |
| 22 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and as directed. |
| 23 | Taking down cement plaster of any description from walls, ceilling etc. including raking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish off the premises and removal of debries out side from MD land etc complete all as specified and directed. |
| 24 | M&L for rendering in CM (1:4) 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with water proofing compound @3% by weight of cement in finishing coat and finishing the surface even and fair.(Note :- WPC will be measured and paid seperately). |
| 25 | M&L for 15mm thick rendering in CM (1:6) internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 26 | M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer including 1.5mm wall care putty etc complete all as specified and as directed . |
| 27 | M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of acrylic emulsion paint (two or more coat applied @ 1.67 ltr/10 sqm over including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including 3mm thick wall care putty complete all as specidied and as directed |
| 28 | S&F for standard size EWC white/Ivory colour with P/S trap white coloured with and including PVC white/ivory coloured seat cover,10 ltr capacity PVC valveless,syphonic action type, low level flushing cistern with inlet, ball valve, float valve and handle including brackets including all connecting to flushing cistern, comnplete all necessary fittings, inlcuding taking down old complete all as specified and as directed. |
| 29 | S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 30 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10cm girth, complete all as per specified and directed. |
| 31 | Taking up or down 15 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed. |
| 32 | Taking up or down 20 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed. |
| 33 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all necessay fittings items complete all as specified |
| 34 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all necessay fittings items complete all as specified |
| 35 | S&F for 15mm bore fancy type bib tap, cromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed inlcuding taking down old complete all as specified and directed. |
| 36 | S&F in Pillar tap cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete 15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F for 15mm size Angle Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc inlcuding taking down old complete all as specified and directed |
| 38 | S&F for 20mm dia & 60 cm long `D' type, chromium plated brass tubular towel rail between flanges inlcuding taking down old complete all as specified and directed |
| 39 | S&F in repair vitreous china, 1st quality urinal half stall type, white, with and including brass chromium plated flush pin, 40mm dia brass CP waste coupling and 40mm dia PVC HDPE waste pipe with all other necessary fittings etc complete all as specified and directed. |
| 40 | S&F for towel ring of long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats (minimum weight 90gms) inlcuding taking down old complete all as specified and directed |
| 41 | S&F for CI floor/nahani trap 75mm dia with grating, incl jointing to waste pipe in run lead complete and making good the disturbed surface to match existing surface inlcuding taking down old complete all as specified and directed |
| 42 | Demolition & breaking up drain pipes upto 110/75 mm dia (salt glazed ware, AC,PVC or reinforced concrete) set in cement mortar. |
| 43 | S&F for 75mm bore of pipe PVC (SWR) pipes single socketted in any length with rubber ring joints laid in walls / floors etc complete all as specified and directed. |
| 44 | S&F for 110mm bore of pipe PVC(SWR) pipes single socket in any length with rubber ring joints laid in walls /trenches or in floors etc complete all as specified and directed. |
| 45 | S&F for PVC (SWR) 75mm Bore Bends any radius |
| 46 | S&F for PVC (SWR) 110mm Bore Bends any radius |
| 47 | S&F for PVC (SWR) 75mm Bore vent cowl |
| 48 | S&F for grating doom 100mm dia of PTMT (min weight 25gms) inlcuding taking down old complete all as specified and directed |
| 49 | S&F for grating doom 100mm dia with waste hole of PTMT (min weight 40gms) inlcuding taking down old complete all as specified and directed |
| 50 | S&F shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40 gms) |
| 51 | S&F for Brass Chromium plated shower roses 125MM Sizewith or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 52 | S&F for shelf of PTMT fixed with and including chomium plated brass scews and wooden/plastic cleats (Min wt 300 gms) inlcuding taking down old complete all as specified and directed |
| 53 | S&F for PVC connections 15mm size with PTMT nuts of length 600mm |
| 54 | M&L for concealed stop cock CP with wall flange, fancy type 20 mm bore dia. |
| 55 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons, staircase, raisers, treads etc complete all as specified and directed. |
| 56 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in cooking platforms, partition, staircase, raisers and treads and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. |
| 57 | M&L waste cuplings 32mm dia (half or full threads). (minimum weight 32 mm-45grms/40mm- 60grms) |
| 58 | S&F for 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, completed all as per specified and directed. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises and removal of debris out side from MD land etc complete all as specified and directed. |
| 60 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured to match coloured tiles, including 20mm thick rendering in CM (1:6) as in backing coat complete all as specified and directed. |
| 61 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirting / dados, including 10 mm thick rendering in CM (1:3) as in backing coat complete all as specified and directed. |
| 62 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. |
| 63 | S&F for glazed ceramic coloured tiles 300x600x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM (1:3) as in backing coat complete all as specified and directed. |
| 64 | M&L for 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work, Complete all as specified and directed. |
| 65 | S & F Continuous 40mm width of flaps (When open) (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.. |
| 66 | M&L for stainless steel sliding channel of 5 ball bearing of suitable length as per cupboard desing complete all as per specified and directed. |
| 67 | M&L for stainless steel self closing type cabinate hinges 40 to 50 mm long L type complete all as per specified and directed. |
| 68 | S &F for 125mm size Brass handles cast type polished bright etc complete all as specified and directed. |
| 69 | M&L for stainless steel handle of Z type profile 20mm wide and 50 mm deep for handling the drawer system complete all as per specified and directed. |
| 70 | S & F for magnetic catcher of approved size and pattern fixed to shutters etc complete all as specified and directed. |
| 71 | S & F for Brass lever Cupboard Lock 75mm size of approved type and pattern etc complete allas specified and directed. |
| 72 | M&L for preparation of old decorated surfaces including for peeling of old putty, scrubbing the surfaces to remove all the loose particles and applying 1.5 mm thick wall care putty,a coat of primer and applying two coats of oil bound distemper on walls complete all as specified and as directed. |
| 73 | M&L for preparation on old plastered surface of wall, chajja, parapet etc and appiying two coats of acrylic emulsion paint ([email protected] ltr/10 sqm for every coat of Acrylic emulsion paint including priming coat of exterior primer applied @ 2.20Kg/10 sqm ) including 3mm wall care putty complete all as specified and as directed |
| 74 | M&L for preparation of old decorated surfaces including for peeling of old putty, scrubbing the surfaces to remove all the loose particles and applying 1.5 mm thick wall care putty,a coat of primer and applying two coats of oil bound distemper on ceiling complete all as specified and as directed. |
| 75 | S&F for 2 way CP Bib cock double handle with flange and all necessary fittings inlcuding taking down old complete all as specified and directed |
| 76 | S & F for SS soap dish holder with flange CAT NO ACN-1131N including taking down old old complete all as specified and directed (Make Jaquar or equivalent in Kohler/ Marc) |
| 77 | S&F for looking mirror 900mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plgs with chromium plated brass screws and cup washers inlcuding taking down old complete all as specified and directed |
| 78 | S&F for 3 in 1 Brass CP wall mixer for mixing hot & cold water including water supply to shower arm, 15mm bore dia pipe, screwed down for iron pipe and fixed, complete all as specified and directed. |
| 79 | M & L Counter top wash basin size 405x580x185 Cat No- FNS-WHT-40601, pillar tap etc making good to match existing surface complete all as specified and directed. (Note : - Rate quoted is inclusive of cutting holes in granite for fixing of waste pipe and wash basin) |
| 80 | S&F for Gl frame work for seamless ceiling 605mmx605mm grid comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Complete all as specified and directed |
| 81 | S&F for 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately), complete all as specified and as directed. |
| 82 | S&F for 40mm thick 2nd class hardwood, boarding supplied and fixed with nails in any situations. Complete all as specified and directed. |
| 83 | S& F for Solid PVC Wall Lining consisting of 5mm thick wood Printed colour PVC sheet inclusive of solvent cement and fixing at site on wooden frame as per specifications and drawing all complete as specified and directed. |
| 84 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete as specified and directed. |
| 85 | Taking down carefully copper/aluminium point wiring (light,fan socket or power) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB's etc complete all as specified and directed. |
| 86 | M & L for point wiring using ISI marked 1.1 kV grade single core FR-LSH flexible cable, conforming to IS: 694- 1990, having multi-drawn thin strands of electrolytic copper conductors, conforming to IS: 8130- 1984 and insulation conforming to IS: 5831- 1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25 mm NB in PVC conduit with all conduit accessories concealed in wall etc.conforming to IS: 9537 (Part 3)- 1983, colour-coded as specified in IS: 11353- 1985, including factory made sunken, galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to IS: 14772- 2000 and including modular cover-plates complete all as specified in IS: 732- 1989 and directed. Note : Concealed wiring shall be done till height of ceiling and there after on ceiling wiring shall be done through PVC casing caping. (For Ser No 86, 87 & 88)(a) One light point / fan point controlled by one switch. |
| 87 | (b) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 88 | (c)One 5 pin 6 amps socket point controlled by one 6 amps switch on same board . |
| 89 | All as per item No. 86 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board. |
| 90 | Supply & fixing modular type switch 6 Amps ,1way,1 module. |
| 91 | Supply & fixing modular type switch 16 Amps ,1way,1 module . |
| 92 | Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module . |
| 93 | Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module. |
| 94 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body |
| 95 | Supply &fix modular type fan regulator stepped type 120 W- 2 module. |
| 96 | Taking down existing tube light fitting, ceiling light fitting of any type/make complete bipin holder,starter, connector etc and fixing back in existing or other place by providing PVC square box -02 Nos,tube rod and adequate length of three core flexible copper cable 0.75 sqmm from ceiling rose to fitting. |
| 97 | Taking down ceiling/Exhaust fan/wall fans,from its position and keeping aside in safe custody for servicing and unserviceable fan shall be deposited in MES store yard. |
| 98 | Supply and fix Modular Modular AC Box With 20A SP MCB, Plastic Enclosure & Unbreakable Heavy Duty With ISI Plug Top complete all as specified and directed.Make- Anchor/Legrand/C&S/havells |
| 99 | Supply and fix slimmest metal panel, recess 20 W LED 6500 K , suitable to fit in to all type of ceiling complete all as specified |
| 100 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt(CW/WW), 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make: Bajaj/Orient/Halonix or equivalent |
| 101 | Material and labour for submain wiring using proper colour code with two runs of single core, 1100 volts grade PVC insulated FRLS, ISI marked, unsheathed (flexible) multistaranded copper conductor cable of size 4 sqmm and one run of single core, 1100 volts grade, PVC insulated FRLS, ISI marked unsheathed (flexible) multistranded copper conductor drawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/beam etc complete all as specified and directed. |
| 102 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades,frame and louvers complete all as specified and directed.Make: Almonard/Usha/Orient Electric |
| 103 | Supply & fix ceiling fans complete with electronic type regulator and accessories 230V,1200mm sweep,BEE 5 star rated, BLDC complete all as specified and directed. Make: Crompton/Atomberg/Bajaj |
| 104 | S & F triple pole & neutral, double door, 6-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wireset & cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed by engineer-in-charge. |
| 105 | Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Make: Bajaj/Orient Electric/Crompton or equivalent Please Enable Macros to View BoQ information |
| 106 | Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Make: Bajaj/Orient Electric/Crompton or equivalent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender