Tender For Internal Periodical Services Incl Connected B/R Works In Karam Vihar, Sumran Line And New Moude Line Jcos/Or Md Accn In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
Tender Value
48 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Periodical Services Incl Connected B/R Works In Karam Vihar, Sumran Line And New Moude Line Jcos/Or Md Accn In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified and filling cracks/hole by applying wall putty (multipurpose mixer will be used for uniform and proper mixing of putty) and applying one coat of distemper oil emulsion White or coloured by auto roller complete incl removal of nails etc and grinding where necessary all as specified & directed by Engr-in-Charge. |
| 2 | M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 3 | M&L Preparation old decorated surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for preparation old decorated surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for preparation of plastered or unplastered decoracted surfaces of wall, plasters, cornices etc and applying one coat of exterior emulsion anti fungal paint 100% acrilic or approved whtie or coloured paint duly adding pigments to required colour filling all the holes and making uniform smooth surface at any height by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-charge. |
| 6 | M&L for complete removal of existing treatment from old decoratd plasterred surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty and applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion anti fungal paint 100% acrilic or approved white or colured over a coat of approved primer by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge. |
| 7 | M&L Preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L Preparation old decorated surfaces on ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L Preparation of old Brick, stone, concrete, asbestos cement or plaster surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply only liquid water proofing compoundcomplete all as specified and directed by Engr-in-Charge. Make Dr fixit/ M/S cico/ Fosroc. |
| 13 | Taking down cement or cement lime plaster of any description on bricks wall etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed by Engineer-in-Charge |
| 14 | M&L 15mm thick rendering other then fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compund paid separtately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L 10 mm thick rendering on ceiling etc surfaces in CM 1:3, finished even and smooth (without using extra cement) all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for Preparing Newly Plastered Surfaces of walls and applying two coats of cement base paint over a Coat of approved primer, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L Preparing Newly Plastered Surfaces of ceiling and applying three coats of white washing complete all as specified and as directed. by Engineer-in-Charge. |
| 19 | M&L for preparation of new plastered surfaces of walls by Vacuum based sanding machine all as specified and filling cracks/hole by applying wall care putty upto 1mm thick as required (multipurpose mixer will be used for uniform and proper mixing of putty) and applying two coats of distemper oil emulsion White or coloured by auto roller complete all as specified & directed by Engr-in-Charge. |
| 20 | M&L for Removing of vegitation growth cutting of shrubs plant or tree of girth not exc 30 cm incl roots from wall and roof of bldg,mouth of rain/waste water pipe for building height upto 30 mtr including necessary scaffolding works, cutting of wall/roof etc to remove complete root of vegetations and applying chemical blue vitriol at the root of vegetation and making good the damaged portion with CM 1:3 or PCC 1:2:4 & two coats of cement base paint etc complete all as specified and directed by Engr-in-charge. |
| 21 | S&F in repairs of Modular wardrobe, cupboards, cabinets, drawers, shelfs, vanity, dressing table including shutters (depth of 45 Cm up to 70 Cm) etc, all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations. All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates, design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters, C/J gola profile for handel less or SS handel, telescopic channels 18'' / 20'' long, rollers for smooths sliding of drawers magnetic catch, etc as required complete all as specified and directed by Engr-in-charge. (Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted) |
| 22 | Dismantling of wall/ floor tile including backing coat any description or any thickness beded and pointed in any cement motar. |
| 23 | M&L for glazed ceramic colour designer concept glazed ceramic tiles 200x300x7mm, 450x350x 7mm or 600x300x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting, dado etc complete all as specified and as directed by Engineer-in-Charge. |
| 24 | M&L for joint free coloured non skid coloured ceramic tiles floor/skirting 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6), complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Demolition of stone slab and tiles of any description or thickness in floors, wall ,aprons laid bedded and pointed in any mortar. |
| 26 | M&L for 18 to 20mm thick granite slab (table rubbed and polished) as in steps, jambs, pillars, wall, window cills cooking platform and the like, bedded and jointed in cement mortar 1:4 and pointed with white cement with admixture of pigment to match with shape of Granite laid over and including bedding layer of 15mm thick cement mortar 1:4, complete all as specified and as directed. |
| 27 | M&L Machnine cut Kota stone slab 20-25mm thick in floor,riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl 10mm thick screed bedding layer or backing caot in CM 1:4 and mirror polishing complete all as specified and as directed by Engr-in-Charge. |
| 28 | M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bed in CM 1:6 incl removing tiles to defence land and rubbish off the permises complete all as specified. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) not exc. 1.5 sqm each and removing off the premises complete all as specified and directed. |
| 30 | S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening with hinges as per specification & drawing complete all as specified and as directed. |
| 31 | S&F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame inc handle (2Nos) & tower bolt (2Nos) at site as per secification & directed |
| 32 | Taking down shutters of any description exc.1.00 sqm and not exc 2.00 sqm each complete all as specified. |
| 33 | S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides with hinges ,aluminum sliding bolt,handes,tower bolt complete all as specified and as directed. |
| 34 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 35 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender