Tender For Welcome Maintenance Of Officer Accn At Drde Gwalior & Periodical Services To Drde Gwalior Under Ge (I) R&D Delhi
Tender Value
39 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Of Officer Accn At Drde Gwalior & Periodical Services To Drde Gwalior Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Preparing old plastered or un plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and one coat of white wash on wall. |
| 2 | Preparing old decorated plastered or un plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and one coat of white wash on ceiling. |
| 3 | Complete removal of existing treatment on walls. |
| 4 | M&L for 1mm thick cement based wall care putty on walls applied in two or more coats, rubbing and finishing to achieve even and smooth surface. |
| 5 | M&L for Two coat of distemper oil emulsion on walls, white or tinted. |
| 6 | Complete removal of existing treatment on ceilings complete all as specified and directed. |
| 7 | M&L for 1mm thick cement based wall care putty on ceilings applied in two or more coats, rubbing and finishing to achieve even and smooth surface. |
| 8 | M&L for two coat of distemper oil emulsion on ceilings, white or tinted. |
| 9 | M&L for Washing, rubbing down and stopping of distempered and painted surfaces of walls including removal of nails, filling pits and cracks with putty and one coat of destemper oil emulsion. |
| 10 | M&L for Surfaces of any description, over 10cm in width orgirth, not otherwise described complete all as specified and directed. |
| 11 | M&L for Preparing old painted wood or wood based surfaces of any description over 10cm width or girth and one coat of synthetic enamel paint. |
| 12 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 13 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | M&L for rendering on Ceiling 5mm thick plaster of concrete surfaces in CM (1:3) complete all as specified and directed. |
| 16 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for preparation of new plastered surfaces and applying two coats of Cement Based Paint over one coat of primer on walls complete all as specified and directed by the Engineer-in-Charge. |
| 18 | M&L for preparion of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises. |
| 20 | M&L glazed ceramic coloured tiles in vertical surfaces, area of each tile exceeding 0.08 Sqm but not exceeding 0.16 Sqm, 7mm to 8mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in CM (1:4). |
| 21 | M&L Non - skid joint free ceramic coloured tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6). |
| 22 | M&L Vitrified ceramic light shade coloured tiles 10mm thick, area not exceeding 0.36sqm (square or rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6). |
| 23 | M&L Vitrified ceramic light shade coloured tiles skirting cut out of 8mm to 10mm thick, area not exceeding 0.36sqm (square or rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4). |
| 24 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. |
| 25 | M&L Granite 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM (1:4). |
| 26 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 27 | Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site. |
| 28 | Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site. |
| 29 | Taking up down steel tubing and connections 25mm bore including cleaning for re-fixing or removal from site. |
| 30 | Cutting chases in brick walls, pinning in making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth |
| 31 | S&F 15mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors. |
| 32 | S&F 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors. |
| 33 | S&F 25mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors. |
| 34 | S&F in repair 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe. |
| 35 | S&F in repairs 15mm diameter cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 36 | S&F in repairs 15mm diameter chromium plated cast copper alloy stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 37 | S&F in repairs 15mm diameter chromium plated cast copper alloy stop valves, fancy type with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 38 | S&F in repairs brass chromium plated shower rose with swivel joints, 125mm diameter, including fixing to steel pipe or union. |
| 39 | S&F in repairs PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer. |
| 40 | S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand. |
| 41 | S&F in repair 32mm waste coupling of PTMT, half or full threaded (minimum weight 45gms) |
| 42 | S&F in repairs 32mm diameter ribbed PVC waste drain pipe for WHB, urinal etc, starched length 90cm with PVC coupling socket. |
| 43 | S&F in repair 15mm diameter chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipe. |
| 44 | S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe. |
| 45 | S&F in repairs chromium plated butterfly spray jet for EWC with 1m long flexible tube provided with end nut and washer. |
| 46 | S&F in repairs 600mm x 450mm x 5mm thick bevelled edge mirror of selected quality glass with aluminium frame of channel alround mounted on 4mm thick commercial ply or AC building board fitted to wooden plug with CP brass screws. |
| 47 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flushing pipe etc. |
| 48 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface. |
| 49 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC. |
| 50 | S&F in repairs 15mm diameter chromium plated cast copper alloy two way stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 51 | S&F in repairs 20mm diameter brass chromium plated tubular towel rail 600mm long including brackets. |
| 52 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed in repairs in wooden or metal frames. |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads. |
| 54 | S&F in repair 3mm thick sheet glass not exc 0.50 Sqm in each pane fixed with wooden beads or putty in wooden or metal frames. |
| 55 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each. |
| 56 | Taking down shutter of any description not exceeding 1 sqm each. |
| 57 | S&F for Solid PVC Door Frame of size 50mm x 478mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet ans edges will be painted to match with printed sheet, reinforced with M.S. Square tube, suppling and fixing in opening as per specification and drawing |
| 58 | S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet and 5mm thick x 15mm wide PVC sheed beading used insied Stiles and Rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading and the paneeling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing |
| 59 | S&F for 30mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (b). |
| 60 | M&L 35mm thick factory made 2nd class hardwood (kiln seasoned and chemically pressure treated) plain framed panelled shutter (two panel) with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rails and stiles as per IS : 1003 (Part-I). |
| 61 | Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10cm in width or girth not other wise described complete all as specified and directed. |
| 62 | S&F 125mm Butt hinges, Medium weight, cold rolled mild steel, and fixed |
| 63 | S&F in repair 18mm thick wood plastic composite (WPC) panel fixed in repair with suitable pins, screws and adhesive in cabinets body, shutters and shelves. |
| 64 | S&F Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutters. |
| 65 | S&F stainless steel modular cabinet hinges with spring suitable to hold the shutter in open/shut position. |
| 66 | S&F 100 mm Butt hinges,Medium weight, cold rolled stainless steel |
| 67 | S&F stainless steel cabinet handles 75mm size decorative type. |
| 68 | S&F 35mm size magnetic catches fixed in modular type cabinets with MS plate (bright polished) on shutter. |
| 69 | S&F of 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed |
| 70 | S&F Aluminium handles, cast type,anodised of size 150mm |
| 71 | SUF 100mm size aluminium anodised hasp and stapple safety type including bolt to hinge plate fixed with screws. |
| 72 | S&F for 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 73 | S&F in repair 75mm size mild steel butt hinges cold rolled, medium weight. |
| 74 | S&F in repair Aluminium anodised barrel tower bolt extruded section, 100 mm long. |
| 75 | S&F in repair Extruded anodised aluminium alloy handles fabricated type 150mm long grip. |
| 76 | S&F in repair Extruded anodised aluminium alloy handles fabricated type 100mm long grip. |
| 77 | S&F in repair 300mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy. |
| 78 | S&F in repair 300mm, ordinary rat tail rod pattern mild steel springs including roller and roller plate fixed in repair complete with screws to wooden frames and by welding to steel frame. |
| 79 | Dismantling of loose and damaged/disintegrated portion of edges of RCC chajjas . roof projections, fins, facia and similar works (crosssectional area not exceeding 150 sqcm) and repairing broken edges in CM (1:4) or cement concrete (1:1 1/2: 3) type AO and chicken wire mesh with nails (to hlod fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto two storied buildings complete all as specified and directed |
| 80 | Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each. |
| 81 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each. |
| 82 | Cutting holes in brick walls built in cement mortar exceeding half brick but not exc. one brick in for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 as required and finishing the surface to match with existing. |
| 83 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 84 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Grade-E-165. |
| 85 | M&L for Preparing surfaces of small steel or iron articles of any description and girth such as holdfasts etc., area not exceeding 0.1 sqm each and treated with tar or coal tar black paint. |
| 86 | M&L for Preparing surfaces of wood and wood based materials of any description and girth such as ends of posts, backs of chowkats, etc., area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint. |
| 87 | Cleaning existing water tanks exceeding 250 and not exceeding 500 litre capacity by disconnecting, setting aside (or lowering if equired), removing all scales and dirt from tanks and from mouths of circulating pipe etc. hoisting, reconnecting and refixing in position and writing date of cleaning on the tank with synthetic enamel paint. |
| 88 | Cleaning existing water tanks exceeding 500 and not exceeding 1000 litre capacity by disconnecting, setting aside (or lowering if equired), removing all scales and dirt from tanks and from mouths of circulating pipe etc. hoisting, reconnecting and refixing in position and writing date of cleaning on the tank with synthetic enamel paint. |
| 89 | Dismantling water tanks exceeding 250 and not exceeding 500 litre capacity. |
| 90 | S&F rotational moulded polythylene water storage tank 500 ltr capacity, cylindrical vertical with closed top, hoisted and fixed in position all as specified. |
| 91 | Taking down PVC Chowkhats or frames exceeding 1.5 sqm but not exceeding 4.0 Sqm each with shutters (without taking off shutters from the frames) |
| 92 | M&L 3mm thick cement based wall care putty on walls applied in two or more coats, rubbing and finishing to achieve even and smooth surface. |
| 93 | M&L 3mm thick cement based wall care putty on ceilings applied in two or more coats, rubbing and finishing to achieve even and smooth surface. |
| 94 | M&L Two coats of exterior emulsion on walls and ceiling, white or tinted. |
| 95 | M&L Two coat of plastic emulsion paint on walls and ceilings, white or tinted.. |
| 96 | M&L for preparation of old painted surfaces of walls and ceilings including removal of nails, filling pits and cracks with putty and one coat of plastic emulsion. |
| 97 | M&L for 2mm thick cement based wall care putty on walls applied in two or more coats, rubbing and finishing to achieve even and smooth surface. |
| 98 | M&L for preparation of old painted steel or iron surfaces of any description over 10 cm width or girth and one coat of synthetic enamel paint. |
| 99 | Marking of building numbers on walls by synthetic enamel paint 300mm diameter (black) circular background and 125mm high letters (white) standing out boldly and solidly without showing signs of brush marks. |
| 100 | Dismantling of loose and damaged/disintegrated portion of edges of RCC chajjas, roof projections, fins, facia and similar works (cross sectional area not exceeding 150 sqcm) and repairing broken edges in CM (1:4) or cement concrete (1:1½:3) type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto two storied buildings. |
| 101 | M&L rendering 10mm thick in CM (1:4) on brick or concrete surfaces in ceiling, finished even and smooth without using extra cement. |
| 102 | M&L for preparation of old rusted steel surfaces of any description, not exceeding 10 cm in width or girth, and applying two coats of aluminium paint over a coat of red oxide primer all as specified and directed. |
| 103 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditionss separately) and making good disturbed surfaces of walls, floors etc. |
| 104 | M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable FRLS in and including PVC concealed conduit of size 20mm diameter for one light point or fan point or bell point controlled by one way switch on plastic laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specifications complete all as specified and directed. |
| 105 | M&L for point wiring for 3 pin socket outlet, 5A, independent, with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including concealed PVC conduit of size 20mm diameter plasitc laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and directed. |
| 106 | M&L for point wiring for 3 pin socket outlet, 5 amps, independent, but below the switch boarch of light points in the same vertical plane with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including concealed PVC conduit of size 20 mm dia plasitc laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed. |
| 107 | M&L for point wiring for 3 pin socket outlet, 15A, independent, with 4 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including concealed PVC conduit of size 20mm diameter plasitc laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed. |
| 108 | M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unseathed copper conductor cable FRLS in and including PVC concealed conduit of size 20mm diameter forOne light point controlled by two 5/6A two way switch. on plastic laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the disturbed surfaces matching with existing specifications complete all as specified and as directed. |
| 109 | M&L in repair Sub main wiring with two single core PVC FRLS insulated cable 4 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC concealed conduit 20mm diameter ISI marked, 1X4 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity including taking down unserviceable submain wiring complete all as specified and directed. |
| 110 | M & L in repair Sub main wiring with two single core PVC FRLS insulated cable 6 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC casing caping 25mm width ISI marked, 1X6 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity including taking down unserviceable submain wiring complete all as specified and directed. |
| 111 | M & L in repair Sub main wiring with 4 single core PVC FRLS insulated cable 10 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC conduit 32mm diameter ISI marked, 2 x 10 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity including taking down unserviceable submain wiring complete all as specified and directed. |
| 112 | S&F in replacement switch piano type 6A one way AC 230V complete all as specified and as directed. |
| 113 | S&F in replacement switch piano type 6A two way AC 230V complete all as specified and as directed . |
| 114 | S&F in replacement switch socket outlet 2in - 1, 6A 5 pin AC 230V complete all as specified and as directed. |
| 115 | S&F in replacement switch Socket outlet 2 in 1, 5 pin 5A and 15A multi purpose socket outlet AC 230V complete all as specified and as directed. |
| 116 | S&F ceiling rose of size 65 x 50mm 3 terminal AC 230V complete all as specified and as directed. |
| 117 | S&F lamp holder angle holder back light type with base plate suittable for 230V complete all as specified and as directed. |
| 118 | S&F door bell AC 230V ding dong single phase complete all as specified and as directed. |
| 119 | S&F in replacement MCB SP 6 to 32A 10 KA 'C' Series, 240V complete all as specified and directed. |
| 120 | S&F MCB SPN 40 to 63A 10 KA , 'C' Series 240V complete all as specified and directed. |
| 121 | S&F MCB TPN 40 to 100A 10 KA 'C' Series 415V complete all as specified and directed. |
| 122 | S&F in repairs of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including single pole MCB 20A complete all as specified and directed. |
| 123 | S&F in repairs of sheet metal enclosures for DBs when MCB to used SPN 4 way double door powder coated factory made with separate neutral and earth links with IP 43 protection, fixed on wall /metal board/wooden board including making all incomming and outgoing connections with suitable copper lugs including disconnecting and taking out old existing enclosure complete all as specified and directed. |
| 124 | S&F in repairs of sheet metal enclosures for DBs when MCB to used SPN 8 way double door powder coated factory made with separate neutral and earth links with IP 43 protection, fixed on wall /metal board/wooden board including making all incomming and outgoing connections with suitable copper lugs including disconnecting and taking out old existing enclosure complete all as specified and directed. |
| 125 | All same as per item srl No 124 above but SPN 12 way. |
| 126 | All same as per item srl No 124 above but TPN 4 way. |
| 127 | S&F Round shaped recess mounted 15 watt, 220V AC LED luminaire, full output luminaire for modern offices with CRCA powder coated body and new generation high effciency PMMA diffuser to provide soft glare free light complete with driver, holders and LED Lamps suitable for modular / POP/ Gypsum ceiling complete including disconnecting and taking out old U/S light fittings complete all as specified and directed. |
| 128 | S&F in repairs of bulk head luminarie with LED 10 watt lamps Hexagonal shaped with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old U/S light fittings complete all as specified and directed by Engineer-in-charge. |
| 129 | S&F energy saving decorative wall mounting LED Lighting fixtures as mirror light made out of poly corbonate with high output diffuser, 2 feet , 10 watt LED and making connections complete all as specified and directed by Engineer-in-charge. |
| 130 | PVC Rectangular block for mounting switches, sockets, regulators etc.with 3mm thick plastic laminates sheet cover of size 100mm x 100mm x 50mm deep complete all as specified and directed |
| 131 | All as per Item No. 130 above but of size 200mm x 150mm x 50mm |
| 132 | S&F in repair Post top lantern LED type 20 watt, 230V AC, outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete including making electrical connection with three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed. |
| 133 | S&F in repairs for LED Tubelight rod 20 watt 240V complete all as specified and as directed. |
| 134 | S&F surface and wall mounted 20 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230V, 50 HZ complete all as specified and directed |
| 135 | M&L in repairs Earthing complete with galvanished earth plate electrode of size 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.00mm diameter by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil, GI funnel with GI mesh charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate No 3 of SSR Part I 2010, 20mm diameter watering pipe medium grade 1.70m long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit (1:3:6) of RCC (1:2:4) type B1 re-inforced with 6mm MS bars centre to centre, 10mm dia handle, complete all as specified and directed. |
| 136 | S&F in repair for LED Domestic bulb 9W type 240 volts complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender