Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58320698

Tender For Repair / Maintenance Of Wooden And Steel Furniture At Area A & C And Area B At Af Stn Wadsar Under Ge (Af) Chiloda

Issued by Statutory Bodies & Commissions/Committees · Gandhinagar, Gujarat
Tender Value
44 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair / Maintenance Of Wooden And Steel Furniture At Area A & C And Area B At Af Stn Wadsar Under Ge (Af) Chiloda

BOQ

Name of Work:- REPAIR / MAINT OF WOODEN AND STEEL FURNITURE AT AREA A & C AND AREA B AT AF STN WADSAR UNDER GE (AF) CHILODA
Sl. No. Item Description
1TABLE 900 X 600 WOODEN (3x2) WITH / WITHOUT DRAWER (Drawing No. FD-283/284)
2Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board BWR type Gde-I 19mm thick as per Drg of Make-Archid/Novapan /Greenply /Kitply ISI Marked with IInd class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc).
3Description all as per item 1.01 above here in before but replacement of table frames long rail with S&F new table frames long rail made out of IInd class hard wood complete all as shown on drawing and as directed by Engr-in-Charge.
4Description all as per item 1.01 above here in before but replacement of new drawer made out of IInd class hard wood (Teak Wood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.
5Description all as per item 1.01 above here in before but replacement of table frames short rail with S&F new table frames short rail made out of IInd class hard wood (Teak Wood) complete all as shown on drawing and as directed by Engr-in-Charge.
6Description all as per item 1.01 above here in before but replacement of bottom centre stiffener with S&F new bottom centre stiffener complete all as shown on drawing and as directed by Engr-in-Charge.
7Description all as per item 1.01 above here in before but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
8Supply and fixing in repair new legs made out with IInd class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc.
9REPAIR TO CHAIR WRITING : - Opening of joints of damaged/broken member of chair writing/ CBA where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge
10S & F front leg (left or right ) made out with IInd class Hard Wooden size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
11All as per item No 2.01above here in before but rear leg (left or right) all as directed by Engr-in-Charge.
12All as per item No 2.01above here in before but back Stiffener
13All as per item No 2.01above here in before but bottom stiffener
14S & F front Arms rest made out with IInd class Hard Wooden of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
15Description all as per item 2.01 here in before but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
16Re canning of chair writing
17REPAIR TO CHAIR DINING (FD-228/279) :- Opening of joints of damaged/broken member of Chair Dining where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge
18S&F front leg (left or right ) made out with IInd class Hard Wooden of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
19All as per item No 3.01 above here in before but rear leg (left or right)
20All as per item No 3.01 above here in before but S&F of Front/Rear/Side rail of Chair Dining all as directed by Engr-in-Charge.
21All as per item No 3.01 above here in before but back members of Chair Dining
22Description all as per item No 3.01 above here in before but replacement of rubber shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
23Re-canning of chair dining.
24REPAIRING TO CHAIR EASY (FD- 229) ;- Opening of joints of damaged/broken member of Chair Easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge
25Re-canning of chair easy
26S&F front leg (left or right ) made out with IInd class Hard Wooden of size and shape as per existing Drg all as directed by Engineer-in-Charge.
27All as per item 4.00 above here in before but Rear leg (left and right)
28All as per item 4.00 above here in before but Arms rest
29All as per item 4.00 above here in before front rail for seat
30All as per item 4.00 above here in before front rail for back
31Description all as per item 4.00 here in before but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
32TABLE WRITING (FD- 275)
33Removing old unserviceable top and S&F new tops made of particle board 18 mm thick commercial BWR Gde I of the size and shape a per Drg of Make-Archid/Novapan /Greenply /Kitply ISI Marked with IInd class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc.
34Removing of old unserviceable back ply of table writing and S&F new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing . Make-Archid/Novapan /Greenply /Kitply
35Opening joints removing old unserviceable legs of tables & S&F new legs made out with IInd class hard wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc.
36REPAIR TO TEAPOY WOODEN (FD-232/278)
37Removing unserviceable top of teapoys/Teapoy FD and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg Make-Archid/Novapan /Greenply /Kitply ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.
38Removing unserviceable/broken stiffener/long rail /side rails of teapoys & S&F new stiffener/long rail /side rails made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.
39Removing unserviceable legs of teapoys & S&F new legs made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.
40REPAIR TO PEG TABLE (FD-227)
41Removing unserviceable top of Peg table and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg Make-Archid/NovapanGreenply/Kitply ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.
42Removing unserviceable/broken legs of peg table and S&F new legs made of IInd class hard wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over acoat of wood filler after preparation of surface etc.
43Taking out old unserviceable/broken long rail of frame any size and S&F new rail of IInd class hard wood planned & finishing smooth of existing shape and size complete all asspecified.
44Description all as per Item No 7.01 above here in before but short rail
45REPAIR TO SIDE BOARD (FD-241/371)
46Removal of old unserviceable/broken existing back of side board and S&F new back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.Make-Kit ply/National/Archidply ISI Marked
47Two magnatic catch spring for shutter.
48Removal of old unserviceable/broken bottom of side board and S&F new side of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick sunmica sheet to external surface of particle board of side board complete all as specified and shown in drawing.Make-Archid/Novapan /Greenply /Kitply ISI Marked.
49Removal of old unserviceable/broken shelf of side board and S&F new shelf of IInd class hard wood existing shape and size duly planned and smooth complete all as specified and shown on drawing and as directed by Engr-in-Charge.
50Removal of old unserviceable/broken top of 18/19mm thick particle board as per existing shape and size including 1 mm thick sunmica sheet to external surface of particle board Make : Novapan and complete all as specified and shown on drawing and as directed by Engr-in-Charge.
51Removal of old unserviceable/broken existing drawer of side board and S&F new drawer of IInd class hard wood of existing shape and size ( 7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified and shown in drawing.
52REPAIR TO TABLE 900 X 900 X 760MM (FD-291)
53Removing of old unserviceable table top and provision of new table top made of pr-laminated particle board 18/19mm thick BWR, interior grade Make-Archid/Novapan /Greenply /Kitply ISI Marked including 4 mm thick teak wood beading all round the table top as specified and shown on drawing and as directed by Engr-in-Charge.
54Removing of old unserviceable leg and S&F new leg of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-Charge.
55Removing of old unserviceable rail and S&F new rail of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-Charge.
56REPAIR TO TABLE DRESSING GENTS (FD-230/ 379)
57Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position & replacement of the same with S&F new top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and including 6mm thick teak wood beading all round made to shape fixed in position pasted with 01mm thick laminated sheet on top all as shown on drawing. Specified and directed by the Engr-in-Charge.
58All as per item No 10.01 above here in before but replacement of side S&F new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6mm thick teak wood beading all-round , made to shape fixed in position all as shown on drg, specified and diredted by the Engr-in-Charge.
59All as per item No 10.01 above here in before but replacement of bottom with S&F new 12 mm thick ply, teak veneered on one side and commercial on other side grade with (BWR Resin) made to shape fixed in position all as shown on drg specified and directed by the Engr-in-Charge complete material & labour.
60All as per item No 10.01 above here in before but replacement of mirror with S & F new mirror with teak wood frame 5.5mm thick mirror of Saint Gobain/Modiguard/Atul , complete all as shown on drawing and directed by Engr-in-Charge.
61All as per item No 10.01 above here in before but replacement of chromium plate knob 25 mm dia of best quality and as approved by Engr-in-Charge.
62REPAIR TO TABLE DRESSING LADIES (FD-251/ FD/MAP-II/07)
63Dismantling taking out carefully and replacement of old existing broken top of table dressing ladies of any description in any position & replacement of the same with S&F new top of 18mm thick pre-laminated particle board exterior grade, BWR Make-Archid/Novapan /Greenply /Kitply ISI Marked , made to shape fixed in position with all as shown on drawing specified and as directed by Engr-in-Charge.
64All as per item No 11.01 here in before but replacement of back plywood 6mm thick commercial ply all as specified and as directed by Engr-in-Charge. Drg No FD-251/32/FD/MAP-II/07
65All as per item No 11.01 here in before but replacement of unserviceable mirror 5.5mm thick with S&F new 5mm thick mirror as per size and shape of drg. Make Modiguard with complete frame all as shown in drawing and directed by Engr in Charge. Drg No FD-251/32/FD/MAP-II/07.
66All as per item No 11.01 here in before but replacement of frame of legs including four legs of dressing table ladies. Drg No FD-251/32.
67REPAIR TO TEAPOY VARANDAH (FD-255)
68Taking down old U/S top of teapoy varandah and S&F new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.
69REPAIR TO TABLE CENTRE (FD-235/274/ 375)
70Taking down old U/S top of table centre with sunmica top and S&F new top of table centre with sunmica top made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.
71Removing of old unserviceable long rail of Table Centre & S&F of long rail made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.
72Removing of old unserviceable short rail of Table Centre & S&F of new side rail made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.
73Removing of old unserviceable leg of Table Centre & S&F of new leg made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.
74BED PLYWOOD TOP (FD-246)
75Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape of IInd class hard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface.
76Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.
77Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI marked all as shown in Drg. Make- : Century/Kitply/Archid/National ISI Marked.
78Removal of old wooden stiffeners and S&F IInd class Hard wood stiffeners of size 50x60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.
79Taking out old unsv long rail of bed plywood and providing of new long rail of IInd class hard wood of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc.
80REPAIR TO TABLE DINING 6/8 PERS (FD-273/376)
81Taking out old unsv top from table dining 6 pers and supply new top of 18/19 mm thick veneered particle board solid core type (1 phase teake veneered particle board solid core type & other side commercial veneered) exterior grade and provided teak wood beading 6 mm thick around fixed with suitable size 6 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed.
82Description all as per item No . 15.01 above here in before but Tabel Dining 8 Pers.
83Taking out old unsv legs from table dining 6/8 pers and S&F new legs of hard wood all as shown on drg and directed by Engr-in-Charge.
84Taking out old unsv long rail from table dining 6/8 pers and S&F new long rail of hard wood all as shown on drg and directed by Engr-in-Charge.
85Taking out old unsv short rail from table dining 6/8 pers and S&F new short rail of hard wood all as shown on drg and directed by Engr-in-Charge.
86M&L preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following :-
87Bed with ply wood top (FD-246)
88Chair writing (FD-280)
89Chair Easy (FD-229)
90Chair dining (FD-228/ 279)
91Table 3'x2' with & without drawer (FD-283/ 284)
92Table writing (FD-249/ 275)
93Side Board (FD-241/371)
94Table 600x600x760mm wooden (FD-293/ 289)
95Table dressing gents with mirror (FD-230/379)
96Table dressing ladies with mirror (FD-251)
97Table centre (FD-235/375)
98Table bed side (FD-276)
99Sofa Set 4/5 seater (FD-281)
100Sofa Chair Single seater (FD-281)
101Teapoy / Teapoy FD (FD-232/278)
102Table Peg (FD-227)
103Table dining 4/6/8 Pers (FD-273/376)
104REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH 1/2 HANGING 1/2 SHEL(FD-67M, FD- 1031, FD-1033)
105Removing of old unserviceable 3 way locking device complete of Almirah Large steel and S&F new 3 way locking device made to shape as required and all as specified in drg and directed by Engr-in-charge.
106Removing of existing old locks of Almirah Large steel and S&F new locks of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-charge (Make : RAINA/REENA/BAJRANG)
107Removing of existing old unserviceable handles including necessary nut, bolts, washer etc of Almirah large steel and S&F new chromium plated handles Make Godraj including necessary nut, bolts, washer etc all as specified & directed by Engr- in- Charge
108Taking out existing shelves and refixing in position including necessary nuts, bolts, washers, clips etc for Almirah large steel all as directed by Engineer-in-charge.
109Removing of old unserviceable legs of Almirah large steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-Charge.
110Removing of existing old unserviceable shelves of Almirah large steel and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-Charge.
111REPAIR TO ALMIRAH MEDIUM STEEL (FD-1032 & FD-243)
112All as per item No 17.01 here-in-before but Almirah Medium Steel
113All as per item No 17.02 here-in-before but Almirah Medium Steel
114All as per item No 17.03 here-in-before but Almirah Medium Steel
115All as per item No 17.04 here-in-before but Almirah Medium Steel
116All as per item No 17.05 here-in-before but Almirah Medium Steel
117All as per item No 17.06 here-in-before but Almirah Medium Steel
118REPAIR TO LOCKER STEEL (FD-257 & FD-1029)
119Removing of old broken/ unserviceable conduit pipe and S&F new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drawing and directed by Engineer-in-Charge.
120Removing of old deshaped/broken Steel shelf and S&F new MS Steel shelf of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint over a coat of primer all as specified and directed by Engr-in-Charge.
121Removing of old broken/ unserviceable existing hasp & staples of Locker steel and S&F new Hasp & Staples of size 75x30x2 mm, shape all as shown on drawing and directed by Engineer-in-Charge.
122Removing of old broken/ unserviceable existing handle of Locker steel and S&F new handle mild steel chromium plated Make Godraj made to shape all as shown on drawing and directed by Engineer-in-Charge.
123Removing of old unserviceable legs of Locker steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of OG paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-Charge.
124REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/WITHOUT DRAWER (FD-1008)
125Taking down old U/S top of table steel 900 X 600 X 760 mm with drawer and S&F new top of table steel 900 x 600 x 760 mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.
126Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.
127Removing existing unserviceable parts of table 900 x 600x760mm Steel (with drawer) and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-Charge.
128Description all as per item No.20 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.
129REPAIR TO TABLE STEEL 900 X 900 X 760 MM (FD-1009)
130Removing of U/S top and S & F new top 18/19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white make Novapan/Bhutan Board/ Kitply/Decco / Mysore with 4 mm thickT.W. beading all-round the table steel 900x900x760mm
131Removing existing unserviceable parts of table 900 x 900x760mm Steel and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge.
132Description all as per item No.21 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.
133REPAIR TO CHARPOY GI PIPE PLY WOOD TOP (FD-220)
134Removing of unserviceable plwood top and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked make Kit Ply/Green Ply/Duro and fixing same with three nos of flat iron strip of size 900x32x5/6mm, bolts nuts and washers bolts of size 5x65mm 06 nos round head bolts after dirlling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-Charge.
135Removing of unserviceable elbow of charpoi GI pipe and s&f three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-Charge.
136Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitabkle for charpoi GI pipe 32mm bore Med grade complete all as specified & directed.
137M&L for removing the threadless/broken long rails from chairpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mtr long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing (GI pipe Make : TATA Jindal).
138Taking out existing old broken long rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 23(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.
139Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No 23(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and complete all as specified and directed by Engineer-in-Charge.
140TABLE OFFICE OFFICER/CLERK STEEL (FD-1004)
141Taking out U/S Top from Table office clerk steel and S&F new top of size 1200x900mm 18/19 mm pre-laminated partical board exterior grade Make- Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-Charge.
142Taking out U/S Top from Table office offrs steel and S&F new top of size 1800x1200mm 18/19 mm pre-laminated partical board exterior grade Make-Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-Charge.
143Taking out unserviceable locks and S&F new brass locks after repairing of drawer and cupboard of table office clerk steel size and shape as per Drg as directed by Engr-in Charge.
144Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.
145M&L for scrubbing and derusting, denting of de-shaped portion and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) incl preparation of surface all as directed by EIC for the following :-
146Table office clerk steel (FD- 1004,1006)
147Table Office officers steel (FD-1003)
148Teapoy varandah (FD-225,383)
149Table 900X600 steel with drawer & w/o drawer (FD- 1007,1008)
150Table steel 900X900mm (FD-1009)
151Chair CB steel with or without arms (FD- 75 (M))
152Almirah large steel with shelves & 1/2 H x 1/2 S (FD - 67 (M), 1031,104 (M) & 1033, )
153Almirah med steel with shelves (FD- 67 (M) ,243,340 & 1032)
154Locker steel (FD-257, FD-1029)
155Chair Verandah (FD-256 )
156Bed hard Ply top (FD/E6/MAP/08 (R) )
157Book Case Steel
158REPAIR TO CHAIR CB STEEL WIITH / WITH OUT ARMS (FD-75(M)
159Removing unserviceable seats from steel chair with & w/o Arms and S&F 32mm thick IInd class hard wood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and .3mm thick for seats and 3 to 3.2mm wide & 0..4mm thick border including supply of cane complete all as directed by Engr-in-Charge.
160All as per item No 25.01 above here-in-before but steel chair back -do-
161Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer
162S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair
163S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.
164Chair Verandah (FD-256 )
165Re-Canning with existing type/size of plastic cane complete.
166REPAIR TO SOFA SET 4/5 SEATER (FD-281)
167Removing of existing U/S cushion from sofa set Four/five seater and S&F new foam cushion Make-sleepwell/Godrej 95 to 100 mm thick 32/40 density duly covered with superior quality tapestry cloth (Not less than Rs. 250/P Mtr) as directed by Engr-in-Charge.
168Removing of existing old tapestry cover from cushion for sofa set four/ five seater and S&F new tepestry cover and tapestry cloth (Not less than Rs. 250/P Mtr) as directed by Engr-in-Charge.
169Removing of existing U/S front/rear rail wooden of sofa set 4/5 seater and S&F new Front/Rear wooden rail made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.
170Removing of existing U/S stiffner/bearer wooden and S&F new stiffner/bearer wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.
171Removing of existing U/S Arm rest wooden and S&F new Arm rest wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.
172Repair of Chair Executive Revolving LB/MB/HB (Branded Make Durian/Godrej/HOF/Gekeen/methodex) as shown below :-
173Repair and replacement of unsv seat PVC 4\\" thick cushion with 40 density with tapestry and fixing with new seat PVC 4\\" thick cushion with 40 density with tapesty cloth/synthetic cover.
174Repair and replacement of unsv Back Rest PVC 4\\" thick cushion with 40 density with tapestry and fixing with new back rest PVC 4\\" thick cushion with 40 density with tapestry cloth/synthetic cover.
175Welding in repair not exceeding 6mm thick MS sheet and not exceeding 5 cm in length.
176Replacement of old unsv coster wheel with new coster wheel fitted.
177Oiling, greasing, and leveling of the revolving system,and render the mechanism serviceable.
178Replacement of existing old unsv handle with fitted new handle.
179Replacement of existing old unsv base and fixing of new base stainless steel /pvc
180Replacement of old unsv hyd cyl with fixing new hyd cylinder
181Replacement of existing broken old MS push back Tilting Plate including seat tilt adjuster
182Repair Of Sofa Set 3 Seater TP (Branded Make-Durian/ Godrej or equivalent)
183Replacement of unsv seat and back cushion 4'' thick including Tapestry Cover for Cushion with special quality of tapestry for Sofa three seater as per sample as approved by GE / Engr - in - charge.
184Repair Of Table Centre With Glass Top (FD-375)
185Removal of broken Unserviceable glass top from table centre glass top and supply & fixing of new glass top of dimensions with size and shape as per existing glass top with thickness of 10mm.
186Repair Of Chair Dining long Back/ Chair Dinning Cushioned (FD-357)
187Repair Of Chair Dining long Back/ Chair Dinning CushionedRemoving the following unserviceble components of chair Dinning lomg back and replacing the same with new one Iind class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing:-
188Repair and replacement of front leg (left or right) made out with Iind class Hard wood size and shape as per existing chair or as per Drg complete all as directed by Engineer-in-Charge
189All as per item ser No 31.01 above here in before but Rear leg (left or right) complete all as directed by Engr-in-Charge.
190All as per item ser No 31.01 above here in before but Side Rail.
191All as per item ser No 31.01 above here in before but Front Rail.
192All as per item ser No 31.01 above here in before but Bottom stifner.
193All as per item ser No 31.01 above here in before but Back Rest vertical strip
194Replacement of unserviceable cushioned with seat and new seat top of chair dinning with 75 mm thick 32 density foam covered with tapestry cloth not less than Rs 250/- per metere as approved on seat of 12 mm commercial plywood BWP grade including tightening of frame work as shown on drg Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320698
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 44 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair / Maintenance Of Wooden And Steel Furniture At Area A & C And Area B At Af Stn Wadsar Under Ge (Af) Chiloda
Basic Detail
Tender No 8488/26-27/E8
Bidding Type Tender
Location
City Gandhinagar
State Gujarat
Key Dates
Publish Date 31 Oct 2026
Submission Date 21 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 44 Lakhs
Tender Fee 500
EMD 88000
Exemption Available
Document List
12f7e332-b462-4a99-a7dc-28adc46ea702.html
BOQ_893658.xls
Tenderdocuments8488.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

12f7e332-b462-4a99-a7dc-28adc46ea702.html

xls

BOQ_893658.xls

pdf

Tenderdocuments8488.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender