Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58320671

Tender For Certain Repair Works, Roof Repair & Facia/ Chajja Repair And Sunken Repair Work In Certain Units In The Aor Of Age B/R-Ii Under Ge Chandimandir

Issued by Statutory Bodies & Commissions/Committees · Panchkula, Haryana
Tender Value
49 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Certain Repair Works, Roof Repair & Facia/ Chajja Repair And Sunken Repair Work In Certain Units In The Aor Of Age B/R-Ii Under Ge Chandimandir

BOQ

Name of Work:- CERTAIN REPAIR WORKS, ROOF REPAIR & FACIA/ CHAJJA REPAIR AND SUNKEN REPAIR WORK IN CERTAIN UNITS IN THE AOR OF AGE B/R-II UNDER GE CHANDIMANDIR
Sl. No. Item Description
1Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed.
2Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed
3Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material outside MoD land complete all as specified and directed.
4Demolition of brick work masonry, built in cement mortar including dismantling all quions, arches, pillars etc complete all as specified and directed.
5Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in plinth protection/ path/ Hard standing/ floor etc. etc complete removal of debris outside MD land.
6Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof), complete all as specified & directed.
7Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar, including removal of any type existing treatment complete all as specified & directed.
8Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and removal, complete all as specified and directed.
9Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed
10Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge.
11Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed.
12Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
13Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed.
14Taking down shutter of any description exc 1 Sqm including easing and adjusting shutters and refixing in the same opening, complete all as specified and directed.
15Steel rolling shutters (1 mm thickness of lath) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of red oxide zinc chrome primer; erected in position as indicated, push, pull or manual type including taking down old shutter complete all as specified and directed.
16Steel rolling shutters (1 mm thickness of lath) without ball bearing, as specified including top cover, anchoring rod, hasp and staple, gear operated type with bevel gear box and crankhandle including one shop coat of red oxide zinc chrome primer; erected in position as indicated including taking down old shutter complete all as specified and directed.
17Safety lever locks of mild steel with 4 levers in steel rolling shutters fixed as in repair complete all as specified and directed.
18Supply and fixing in repair ball bearing for rolling shutters complete all as specified and directed.
19Factory made 20mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one side prelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent / adhesive, fixed as in repair complete all as specified and directed.
20Continuous (Piano) hinges, bright finish or electrogalvanised 30mm (width of flap when open) , mild steel , complete all as specified and directed.
21Stainless steel self closing hinge of 75 mm size for WPC door shutter complete as specified and directed.
2250 X 15 mm size magnet door catcher with screws as required for WPC door shutter complete as specified and directed.
23150 mm size SS mat / glossy finish handle complete as specified and directed.
24Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed.
25Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed.
2635mm thick of second class hard wood glazed and Skeleton shutter open rebated & prepared to receive wire gauge (with sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc.; Size of members of shutters as specified in SSR Part 1, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
27Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.
28Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
29Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge
30Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, fixed as in repair all complete all as specified and directed. Please Enable Macros to View BoQ information
31Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, fixed as in repair all complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320671
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Certain Repair Works, Roof Repair & Facia/ Chajja Repair And Sunken Repair Work In Certain Units In The Aor Of Age B/R-Ii Under Ge Chandimandir
Basic Detail
Tender No GE/CHM-109/2026-2027
Bidding Type Tender
Location
City Panchkula
State Haryana
Key Dates
Publish Date 31 Oct 2026
Submission Date 21 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Available
Document List
932ff779-b3a3-492c-93ff-426042167080.html
BOQ_893743.xls
Tendernotice_1.pdf
Tenderpages109.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

932ff779-b3a3-492c-93ff-426042167080.html

xls

BOQ_893743.xls

pdf

Tendernotice_1.pdf

pdf

Tenderpages109.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender