Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58320658

Tender For Repair/Replacement Of Lt Cables/Bus Ducts At Vlm And Ssp Jetty At Eoc Jetty Under Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam.

Issued by Statutory Bodies & Commissions/Committees · Visakhapatanam, Andhra Pradesh
Tender Value
99.62 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
9 days left
EMD
1.74 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement Of Lt Cables/Bus Ducts At Vlm And Ssp Jetty At Eoc Jetty Under Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam.

BOQ

Name of Work:- REPAIR/REPLACEMENT OF LT CABLES/BUS DUCTS AT VLM AND SSP JETTY AT EOC JETTY UNDER NAVAL DOCKYARD, VISAKHAPATNAM UNDER GE (I) DM, VISAKHAPATNAM.
Sl. No. Item Description
1[SCHEDULE 'A' PART-I [E/M WORKS]
2Supply and fix of LT cable end termination for cable sizes 400 Sq mm, 3.5 core, 1100 volts grade by cutting out damaged portion of XLPE insulated cable ends including disconnection cable ends from ACB/MCCB/Busbar and reconnection with existing/new all as specified and directed.
3Supply and fix MS cable support structure made with ISA 75x75x8mm grouted to gallery wall with angle fastner bolt of dia not less than 16 mm to 25 mm ,painting the MS structure with one coat of red oxide primer and two coats of synthetic enamel paint complete including taking out old unserviceable cable support structure from the jetty gallery complete all as specified and as directed.
4M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmens complete all as specified and as directed including taking out of old unserviceable MS cable cover/support structure.Grade of steel Fe 410 -W (Gde E- 250) quality -A structure complete all as specified and directed.
5M&L for fixing galvasnized earth strip of size 32mm x 6 mm making drilled hole at both ends and fixing to cope point, PBs, and JBs including takingdown old one unserviceable complete all as specified and directed .
6M&L earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32 x 6 mm by means of nuts, bolts check nuts, washers of galvanised iron or steel all as shown in electrical plate No:5 of SSR Part I connected to earth test point including excavation work in any strata PCC chamber with PCC cover slab with GI protection pipe 40 mm dia light gde upto 7.5 mtr/20 mm dia tunnel pipe med grade but all as specified and directed .
7Supply, installation, testing and commissioning of LT Panel floor mounted cubical/trunk type outdoor made out of 2 mm thick CRCA steel sheet traded and powder coated, prewired, factory made , with provision for two incoming and Bus Coupler,individual comparment dust and vermin proof, weather proof electrical panel and with Godrej type lock, cable glands etc. and consisting of the following all as specified and as directed :- (i) Electrolytic Aluminum Bus bar of capacity 3200 Amps for phases and neutral. (ii) ACB 2500 Amps 4 pole 50KA as incommer-01 No, (iii) ACB 2000 Amps 3 pole 50 kA -01 No out going, (iv) ACB 800 Amps 3 pole 50kA-01 No out going, (v) Digital Ammeter 0-2000 Amps-02 Nos . (vi) Digital voltmeter 0-500 Volts-02 Nos .(vii) Indication lamps RYB -02 sets.Note : Drawing for LT panel showing layout of incoming and outgoing switch gear with capacity before errection shall be approved by Engr-in-Charge.(ii) Unit rate quoted include for necessary grouting / chipping of concrete and Anchor fastners and providing necessary PCC foundation to fix the LT Panel enclosure.
8M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 400 sq. mm 3.5 core including taking out old unserviceable complete all as specified and directed.
9M&L for dismantling and taking down old unsv Busduct of capacity 4000Amps, 1000V grade from Gallery including 90 degree bend joints all as specified and as directed.
10Supply Install testing and commisioning of Sandwitch busduct of capacity 4000Amps, 1000V AC 50 Hz as per IEC 61439 & IS standard, Class \\"F\\" insulation 1.6mm thick GI epoxy coated enclosure, Aluminium conductor with IP 66 rating for Straight Feeder all as specified and as directed.
11Supply Install testing and commisioning of 90 degree bend (as per site requirements) Sandwitch busduct of capacity 4000Amps, 1000V AC 50 Hz as per IEC 61439 & IS standard, Class \\"F\\" insulation 1.6mm thick GI epoxy coated enclosure, Aluminium conductor with IP 66 rating all as specified and as directed.
12M&L for Dismantling and Taking down old unsv Busduct of capacity 2500Amps, 1000V grade from Gallery including 90 degree bend joints all as specified and as directed.
13Supply Install testing and commisioning of Sandwitch busduct of capacity 2500Amps, 1000V AC 50 Hz as per IEC 61439 & IS standard, Class \\"F\\" insulation 1.6mm thick GI epoxy coated enclosure, Aluminium conductor with IP 66 rating for Straight Feeder all as specified and as directed.
14Supply Install testing and commisioning of 90 degree bend (as per site requirements) Sandwitch busduct of capacity 2500Amps, 1000V AC 50Hz as per IEC 61439 & IS standard, Class \\"F\\" insulation 1.6mm thick GI epoxy coated enclosure, Aluminium conductor with IP 66 rating all as specified and as directed.
15M&L for opening of monoblock joint in LT Bus Duct of capacity upto 4000Amps, 1000V grade and decarbonizing of the contact points along with checking for any defects due to any flush/loose contact, cleaning of all fixed contact point, terminal connection points with CTC and re-fixing the same and tightening the nuts, bolts, spring washers & thimbles all as specified and directed.
16S&F GI performed cable trays - width 450 mm x height 75mm X thickness 2.5mm complete with trays,coupler,cover,and cover clip to support clamps, securing properly to support structure complete including cable trays from building wall more than 3 mts height from GL all as specified and as directed.
17S&F of cable rack/tray support made with structural steel section (Fe-290, Gde E165) pre-welded, on wall, placing in position and fixing to wall with fastner steel bolt not less than 16mm dia including painting with one coat of red oxide and two coat of black synthetic enamel paint all as specified and as directed.
18[SCHEDULE 'A' PART-II [B/R WORKS]
19M&L for MS rolled section of grade Fe-410-W (Gde - E-250), quality - A (beam, tee, angle channel or flat sections) as in roof trusses (framed), trussed purlins, crane gantries rails, and fastening and heavy bracket framing including distance pieces, cleats etc.including dismantling existing one complete all as specified and directed.
20M&L for PCC M-30 Design mix concrete (Using 20 mm graded stone aggregate) as in floors, Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete including finishing the surface complete all as speified and directed.
21S&F The two 150mm long angle iron pieces along with Mooring ring shall be fixed into the Jetty floor concrete with 04 Nos. full threaded nuts and bolts of 20 mm dia and 200 mm long inserted to a depth of 200mm, 25mm dia hole drilled into the RCC/STEEL berth/beam and slabs. The hole shall be cleaned and filled with lock fix chemical and 20mm bolt shall be inserted in the hole and grouted with lock fix chemical complete all as specified and directed.
22S&F for rolled mild steel chequered plate as covers confirming to Fe 290.Gde-E-165 welded to supporting of duct covers complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320658
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 99.62 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement Of Lt Cables/Bus Ducts At Vlm And Ssp Jetty At Eoc Jetty Under Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam.
Basic Detail
Tender No 8691/C/E8
Bidding Type Tender
Location
City Visakhapatanam
State Andhra Pradesh
Key Dates
Publish Date 31 Oct 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 99.62 Lakhs
Tender Fee 1000
EMD 1.74 Lakhs
Exemption Available
Document List
41e2fd38-46c2-43f1-ba70-7bdff545d2b9.html
8691Tender.pdf
BOQ_893706.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

41e2fd38-46c2-43f1-ba70-7bdff545d2b9.html

pdf

8691Tender.pdf

xls

BOQ_893706.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender