Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58320657

Tender For Special Repairs To Road Including Footpath At Prtc Under Ge(North) Bangalore.

Issued by Statutory Bodies & Commissions/Committees · Bengaluru Urban, Karnataka
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
4 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Road Including Footpath At Prtc Under Ge(North) Bangalore.

BOQ

Name of Work:- SPECIAL REPAIRS TO ROAD INCLUDING FOOTPATH AT PRTC UNDER GE(NORTH) BANGALORE.
Sl. No. Item Description
1Material and Labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and depth exc 50mm not exc 100mm etc complete all as specified and as directed.
2M&L for 7.5cm thick (compacted thickness) WBM of Granite, Trap or Basalt stone with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.
3M&L for Preparing of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.
4M & L for Applying evenly a priming/ tack coat with bituminous primer using pressure distributor on the WBM surfaces with paving bitumen of VG-10 grade @ 10 Kg. Per 10 Sq. Metres.complete all as specified and as directed.
5M & L for labour for premix bituminous macadam(Design Mix) with minimum 40-60 TPH bach type HMP using crushed stone aggregates of specified grading, premixed with VG-30 bituminous binder @ 4% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade, level and alighnment, rolling with smooth wheeled, vibratory and tindem roller to achieve the dezire compaction as per MORTH specification clause no 505 complete in all respects, (consolidated thickness 75 mm or less) etc, complete all as specified and as directed.
6M&L for repairs to pot holes of any depth not exc 1.00 sqm each in area including sweeping free from dust and mud or water, scoring the sunken surfaces in roads etc cutting around edges to at least 25mm in depth , making good by applying tack coat @ 5kg per 10 Sqm (using paving bitumen of VG-10 grade), putting in premixed bituminous macadam, well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed.
7M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.
8M & L for Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of VG-10 grade @ 5 Kg. Per 10 Sq. Metres.complete all as specified and as directed.
9M&L Bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content by weight of total mix by using Paving bitumen (VG-30 grade) as in semi dense asphaltik concrete mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient all as specified and as directed.
10M& L for preparing bituminous surface of road and marking 2.5mm thick centre line,stop lines,dashes,arrows etc. and the like exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with reflectorizing glass beads on bituminous surface with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed.Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained.
11S&F in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model no DA 972 fixed with and including MS stud of suitable size all as per manufacturers instructions and as directed.
12S & F in repair Solar Cat eye aluminium alloy shall(100% water proofing design according to 65) of size 125 mm x125 mm x25 mm(Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 v/0.3 watt one NI-ed rechargeable battery(1.2v/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and as directed.
13Dismantling of Stone slabs and tiles laid dry, or laid dry bedded and pointed of any description or thickness in floors, aprons etc complete all as specified and as directed.
14Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) including staking serviceable material and removing debris outside MD land complete all as specified and as directed.
15M & L hardcore of gauge n.exc. 63mm of broken stone deposited, spread, levelled, in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed.
16M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate in sub base, floor.complete all as specified and directed.
17M&L for Sand filling under floors or in foundations including watering and consolidation as sand cushioning complete all as specified and directed.
18M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as approved by GE and as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed.( Note :- Sand bedding layer will be measured and and paid seperately)
19M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specfied and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320657
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To Road Including Footpath At Prtc Under Ge(North) Bangalore.
Basic Detail
Tender No 86564/E8
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 31 Oct 2026
Submission Date 21 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 30 Lakhs
Tender Fee 500
EMD 60000
Exemption Not Available
Document List
32b180f6-dd7c-4e0d-b264-9e7fcc053311.html
BOQ_893758.xls
tender86564.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

32b180f6-dd7c-4e0d-b264-9e7fcc053311.html

xls

BOQ_893758.xls

pdf

tender86564.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender