Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58320655

Tender For Repair/Replacement And Maintenance Of Drains, Boundary Walls. Fencing, Sewage Line, Manholes Incl Attending Day To Day Complaints, Certain Other Misc B/R Works At Dgis, Cams, Wardec, Iml, 1 Cbpo, 22 Garh Rif, Ihq Of Mod (Army) C Under Age

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
1.09 Crore
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement And Maintenance Of Drains, Boundary Walls. Fencing, Sewage Line, Manholes Incl Attending Day To Day Complaints, Certain Other Misc B/R Works At Dgis, Cams, Wardec, Iml, 1 Cbpo, 22 Garh Rif, Ihq Of Mod (Army) C Under Age B/R-I Of Ge (South) Delhi Cantt-10

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 21-Nov-2026 CORRIGENDUM 1 Date 02-Dec-2026

BOQ

Name of Work:- REPAIR/REPLACEMENT AND MAINT OF DRAINS, BOUNDARY WALLS. FENCING, SEWAGE LINE, MANHOLES INCL ATTENDING DAY TO DAY COMPLAINTS, CERTAIN OTHER MISC B/R WORKS AT DGIS, CAMS, WARDEC, IML, 1 CBPO, 22 GARH RIF, IHQ OF MOD (ARMY) C UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10
Sl. No. Item Description
1M&L for attending day to day complaints of cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, Bath, Toilets, Cook House, Dining Halls, Rain water pipes, open drains, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm (internal dia) by manually using bamboo or other eqpt / mechanically as per requirement at site and removing blockage from entire system and making it fully functional and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge, to maintain internal & external sewage system in functional state at all the time including the removal of sludge / night soil produced by daily cleaning beyond MOD land immediately after drying.Note :- (i) The complaints shall be attended & defects shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a penalty @ Rs.120/-per complaint per day (08 hrs) shall be leived upon/imposed on the contractor and necessary recovery shall be made from his dues on this account.(ii) Contractor shall arrange suitable mechanical equipments including necessary scaffolding and safety measure complete all as specified and directed. (iii) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e trolley mounted sewer cleaning machine once in every month for cleaning entire sewage system and free of any sludge/ blockage.(iv) The contractor or his authorized representative shall report daily to the Complaint Cell for collection of complaints and also monitor online complaints received through VYNUS or other means. In case, after inspection and attending the complaint/defect, it is not possible to rectify the same within 08 hours, the matter along with detailed reasons shall immediately be brought to the notice of the Engineer-in-Charge by the contractor or his representative. If the Engineer-in-Charge is satisfied with the justification furnished, no recovery shall be effected on this account.
2Cleaning of sewage lines from 150 mm bore not exc 300 mm bore in cluding manholes by super sucker machine with water jet pressure, the sucked wastage material will be collected in tanker and disposed off out of MoD land . All T&P will be provided by contractor including water for pressure to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole complete all as specified and directed by Engr-in-Charge.
3M&L for cleaning of existing open/covered drains of any size and depth by removing accumulated silt, sludge, mud, vegetation, rubbish, debris and all other foreign materials, including opening and refixing existing drain covers wherever required, rodding/flushing and clearing minor blockages, dressing and cleaning drain bed and sides to restore free flow of water, collection, loading, carriage and disposal of removed material to an approved dumping place outside the site, including all labour, tools and plants and making good any minor disturbance caused during cleaning, complete all as specified and directed by Engineer-in-Charge.
4Cleaning of manhole by super sucker machine of any size but upto 1.0m depth and removal of sludge silt/liquid/mud/sand/water etc in foul position to out side the MOD land complete all as specified and directed by the Engineer-in-Charge.
5All as per item No.04 here-in-before but exceeding 1m and not exceeding 2m in depth.
6All as per item No.04 here-in-before but exceeding 2m and not exceeding 3 m in depth.
7M&L old size brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius including dismantling existing bricks complete all as specified.
8Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling.
9M&L 15 mm thick ready mix plaster (self curing) on newly plaster surfcaes of wall all as specified and directed.
10Material & Labour for preparation of new plastered surfaces of external walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
11M&L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickeness 1mm over the plastered/old painted wall/ceiling after scrapping to prepare the surface with machenical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.
12Material & Labour for complete removal of existing treatment of external walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
13M&L for providing and fixing factory manufactured Heavy Duty FRP (Fibre Reinforced Polymer) manhole/drain cover with matching FRP frame, manufactured from UV stabilised isophthalic polyester resin reinforced with E-glass fibre, having anti-skid chequered top surface, corrosion and weather resistant, suitable for heavy vehicular traffic with minimum load bearing capacity of **40 tonnes (Class D-400)** conforming to EN 124 or equivalent approved standard, including preparing existing manhole seating and fixing the frame in cement mortar 1:4 complete with all materials, labour and incidental works, all as specified and directed by the Engineer-in-Charge. Manufacturer's test certificate for load bearing capacity shall be submitted and sample approved by GE/EIC before incorporation. **(Measured in square metre of clear plan area of FRP cover)
14M&L for 170mm nominal size (DWC HDPE) Double wall corrugated high density polyethylene pipe (SN8) Conforming to IS 16098 (Part 2) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, including demolition and breaking up drain pipes 300 mm, dia bore (salt glazed stoneware/ACC/RCC), set in cement mortar, including removal of waste material upto 500 metre distancecomplete all as specified and directed.
15M&L for 300mm nominal size (DWC/HDPE) Double wall corrugated high density polyethylene pipe (SN8) Conforming to IS 16098 (Part 2) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and directed.
16M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base incl demolition of Cement Concrete (unreinforced cement concrete)) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
17Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed.
18M&L glossy finished coloured Chequered cement concrete tiles 25cm x 25cm x 20 mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed all as specified and directed.
19S&F 400x400x15mm thick heavy duty parking tiles of any colour, any pattern any design as approved by GE, as in floors/landing/steps/riser/parking/ footpath etc and over & including 15 mm thick screed bed or bedding/ rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles including dismantling of existing tiles of any description complete all as specified and directed
20M&L plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching rounded or chamferred on edges includind use and waste of form work complete all as specified.
21M&L in repair, CI gully trap, square or round mouthed,150mm x 150 mm size, shape as required,including dismantling and taking out of old GT and jointing with old connection and pipes complete all as specified and directed by the Engineer-in-Charge.
22S&F in repairs factory manufactured heavy duty FRP (Fibre Reinforced Polymer) gully trap cover, minimum 25 mm thick, with complete matching FRP frame set of size 300 mm × 300 mm, manufactured from UV stabilised thermosetting resin reinforced with high strength E-glass fibre, having anti-skid chequered top surface and integrally moulded ribs/stiffeners, corrosion, water and weather resistant and of approved load bearing capacity, set and fixed true to line and level in cement mortar 1:6 on existing gully trap, including cleaning and preparation of existing seating, all materials, labour, carriage and incidental works complete all as specified and directed by EIC. Notes: (i) Make shall be of approved manufacturer or equivalent as approved by GE. (ii) Contractor shall provide manufacturer's test certificate for FRP cover and frame including load bearing capacity and shall get the sample approved before incorporation in the work.
23Dismantling fencing wire mesh any type all as specified and directed.
24M & L for Cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in filling and mass concrete including form work complete all as specified and as directed.
25S&F 2.5 mm thickness Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified and directed.
26Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
27S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240
28S&F mild steel work such as in fencing post, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410 complete all as specified and as directed
29M&L for new or previously untreated surface of steel and applying 2 coats of synthetic enamel paint over a coat of red oxide exc 10 cm width or girth etc.complete all as specified and as directed
30M&L for preparation of Old painted surfaces of steel & steel based surface of any description not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed
31Supply and fixing chain link MS galvanised fencing IS:2721 (2003) any size or type @ min 2 kg/ sqm having tensile strength within the range of 400 to 550 Mpa incl fixing to any type of standard, rail, straining bolts, etc. including provision of binding wire complete all as specified & directed by Engr-in-Charge.
32M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite incl Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed.
33Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified
34Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified
35M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.
36S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor including dismantling of cast iron or reinforced concrete, PVC(SWR) pipes ,joinetd in cement mortor and taking out of trenches complete all as specified and directed.
37M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spiraly for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Eng-in-Charge.
38M&L for mild steel TMT bars 6.0 to 10mm dia, cut to length, bent to shape required including cranking, bending spireally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Eng-in-Charge.
39M&L for form work in beams etc. in vertical for rough finish flat surfaces all as specified and directed by Engr-in-Charge.
40M&L for RCC design mix M-25 grade in beams, and the like complete, all as specified and directed by Engr-in-Charge.
41S&F for 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched including rounded headed screws, clout nails or reverts & fixed to steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc as required.
42S&F framed work such as grills, gratings, etc. with ends of bras shouldered and/or riveted, pr fprged omtp spike: framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290. Gde E-165.
43S & F 25 mm thick 100% Solid WPC ( Wood polymer Composite ) JALI of required size comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/Cum including dismantling of old boarding or GI sheets complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320655
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.09 Crore
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement And Maintenance Of Drains, Boundary Walls. Fencing, Sewage Line, Manholes Incl Attending Day To Day Complaints, Certain Other Misc B/R Works At Dgis, Cams, Wardec, Iml, 1 Cbpo, 22 Garh Rif, Ihq Of Mod (Army) C Under Age B/R-I Of Ge (South) Delhi Cantt-10
Basic Detail
Tender No CWE-ND/T-94/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 21 Nov 2026
Submission Date 02 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 1.09 Crore
Tender Fee 1000
EMD 1.14 Lakhs
Exemption Not Available
Document List
2fa87623-bdc1-4d91-825c-ba4395b83340.html
BOQ_893697.xls
TENDER.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 10 days
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

2fa87623-bdc1-4d91-825c-ba4395b83340.html

xls

BOQ_893697.xls

pdf

TENDER.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender